Page 1
1
638BA
MP3-Compatible AM/FM CD Receiver
U S E R ’ S M A N U A L
CONTENTS
Installation
DIN front-mount installation
DIN rear-mount installation
Removing the head unit
Detaching the front panel
Replacing the front panel
General controls
Radio controls
Audio controls
CD/MP3 Playback controls
How to select MP3 files
Controls behind faceplate
USB and Front side AUX IN operations
Remote control functions
How to use bluetooth in your car audio
Wiring diagram
Troubleshooting
Specifications
2
3
4
4
5
5
6
7
8
9
10
10
11
12
13-14
15
16
17
3309 (638BA _2nd BT) -IM.indd 1 12/12/06 2:37:39 PM
Page 2
2
3309 (638BA _2nd BT) -IM.indd 2 12/12/06 2:37:41 PM
Page 3
3
Installation
3309 (638BA _2nd BT) -IM.indd 3 12/12/06 2:37:42 PM
Page 4
4
Release Button
press RELEASE to release
the front panel...
Before removing the bezel, press the
RELEASE button to remove the front panel.
3309 (638BA _2nd BT) -IM.indd 4 12/12/06 2:37:43 PM
Page 5
5
Release Button
press RELEASE to release
the front panel...
3309 (638BA _2nd BT) -IM.indd 5 12/12/06 2:37:44 PM
Page 6
6
Front panel controls
GENERAL CONTROLS
POWER Press any button to turn unit ON. To turn
head unit off, press and hold POWER.
RELEASE Press to release and remove the front panel.
DISP Selects radio frequency or clock display.
To set the clock:
1. With clock display selected, hold down (DISP) button until
clock display starts flashing.
2. Rotating VOL left to change minutes, VOL right to change
hours.
3. Press (DISP) button to start clock
BEEP MODE When press the AUDIO button for more than 2 seconds, it is activated as selecting mode of these function.
BEEP ON: BEEP sound can hear from speaker when the buttons are pressed.
The Liquid Crystal Display will display the current state of the unit.
MULT ON/OFFMULT
DSP
AUDIO
2 sec.
AUDIO
AUDIO
DSP
AUDIO
2 sec.
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
VOL
LOUD ON/OFF
DSP
AUDIO
2 sec.
AUDIO
LOUD
AUDIO
LOUD
VOL
WOOF ON/OFF
WOOF
VOL
VOL
SCROLL
AUDIO
SCROLL 1/2
VOL
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
ESP 10/40
VOL
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
MULT
AUDIO
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
MULT ON/OFFMULT
DSP
AUDIO
2 sec.
AUDIO
AUDIO
DSP
AUDIO
2 sec.
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
VOL
LOUD ON/OFF
DSP
AUDIO
2 sec.
AUDIO
LOUD
AUDIO
LOUD
VOL
WOOF ON/OFF
WOOF
VOL
VOL
BEEP
AUDIO
BEEP ON/OFF
VOL
SCROLL
AUDIO
SCROLL 1/2
VOL
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
ESP 10/40
VOL
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
MULT
AUDIO
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
SCROLL
AUDIO
MULT
AUDIO
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
SCROLL MODE When press the AUDIO button for more than 2 seconds, it is
activated as selecting mode of these function.
SCROLL 1: Unit displays song details but no text scrolling.
SCROLL 2: Unit displays song details and scrolls the text information to the left.
3309 (638BA _2nd BT) -IM.indd 6 12/12/06 2:37:46 PM
Page 7
7
MULT ON/OFFMULT
DSP
AUDIO
2 sec.
AUDIO
AUDIO
DSP
AUDIO
2 sec.
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
VOL
LOUD ON/OFF
DSP
AUDIO
2 sec.
AUDIO
LOUD
AUDIO
LOUD
VOL
WOOF ON/OFF
WOOF
VOL
VOL
STEREO
AUDIO
STEREO ON/OFF
VOL
BEEP
AUDIO
BEEP ON/OFF
VOL
SCROLL
AUDIO
SCROLL 1/2
VOL
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
ESP 10/40
VOL
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
MULT
AUDIO
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
SCROLL
AUDIO
MULT
AUDIO
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
BEEP
AUDIO
SCROLL
AUDIO
MULT
AUDIO
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
MULT ON/OFFMULT
DSP
AUDIO
2 sec.
AUDIO
AUDIO
DSP
AUDIO
2 sec.
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
VOL
LOUD ON/OFF
DSP
AUDIO
2 sec.
AUDIO
LOUD
AUDIO
LOUD
VOL
WOOF ON/OFF
WOOF
VOL
VOL
LOCAL
AUDIO
DX/LOCAL
VOL
STEREO
AUDIO
STEREO ON/OFF
VOL
BEEP
AUDIO
BEEP ON/OFF
VOL
SCROLL
AUDIO
SCROLL 1/2
VOL
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
ESP 10/40
VOL
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
MULT
AUDIO
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
SCROLL
AUDIO
MULT
AUDIO
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
BEEP
AUDIO
SCROLL
AUDIO
MULT
AUDIO
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
STEREO
AUDIO
BEEP
AUDIO
SCROLL
AUDIO
MULT
AUDIO
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
STATION PRESETS Six numbered preset button store and recall stations for each band.
Storing a station:
1. Select a band (if needed)
2. Select a station
3. Hold a preset button longer than one second. Preset station number appears in the display when station is saved.
Recall a station:
1. Select band (if needed)
2. Press a preset button for less than one second to select stored station.
TUNE BUTTONS When pressed for less than 1 second, these keys operate as
SEEK tuning mode.
When pressed longer than 1 sec., they are operated as MANUAL tuning mode.
If the keys are not pressed for 3 seconds, they will return to SEEK mode again.
AS/PS Select six strong stations and store them in current band.
1. Select a band (if needed)
2. Hold A/PS button for more than three seconds. The new stations replace
stations already stored in that band.
Preset Scan
Scan stations stored in current band
1. Select a band (if needed)
2. Touch A/PS for more than one second but less than three seconds. Radio
pauses for five seconds at each station. Touch A/PS again to stop scanning
when desired station is reached.
SCAN This key is operated as RADIO SCAN. The operation is similar as
normal search but different thing is holding 5 seconds on every station
detected in RADIO SCAN mode.
BAND Push this switch to select the desired band. Selection is made in
regular sequence as FM-AM.
MENU MODE When press this button for more than 2 seconds, it is activated as selecting
mode of these function.
STEREO/MONO MODE When press AUDIO button for more than 2 seconds, it is activated as
selecting mode of these function.
When FM stations are weak and are disturbed, listening can be improved by selecting
MONO.
LOCAL/DX MODE When press AUDIO button for more than 2 seconds, it is activated as selecting mode of these function.
“Local” position in areas with strong signals to let radio stop at only strong stations during
manual tuning (LOC appears). Press to Distant position in areas with weak signals to listen
to all stations.
RADIO CONTROLS
3309 (638BA _2nd BT) -IM.indd 7 12/12/06 2:37:47 PM
Page 8
8
DSP
AUDIO
2 sec.
AUDIO
DSP
AUDIO
2 sec.
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
VOL
LOUD ON/OFF
DSP
AUDIO
2 sec.
AUDIO
LOUD
AUDIO
LOUD
VOL
WOOF ON/OFF
WOOF
VOL
DSP
AUDIO
2 sec.
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
VOL
LOUD ON/OFF
DSP
AUDIO
2 sec.
AUDIO
LOUD
VOL
AUDIO BUTTON and ROTARY CONTROL Press the button repeatedly to access Volume, Bass, Treble, Balance and Fader functions. Then use the knob
to adjust the selected function.
SOURCE By pressing this key, user can select AUX/TUNER/CD-MP3/
USB mode.
SUBWOOFER Press this button to engage subwoofer output
DSP MODE When press AUDIO button for more than 2 seconds, it is
activated as selecting mode of these function.
POP, ROCK, CLASSIC, FLAT or DSP OFF selected by rotary VOL left or right
LOUD MODE When press AUDIO button for more than 2 seconds, it is
activated as selecting mode of these function.
LOUD ON/OFF mode is selected by rotary VOL left or right. Increase the
level
of bass output.
SUBWOOFER When press AUDIO button for more than 2 seconds, it is
activated as selecting mode of these function.
SUBWOOFER output selected by rotary VOL left or right.
DSP
AUDIO
2 sec.
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
VOL
MUTE Press this button to silence the receiver. Press again to return to normal
operation.
Front panel controls
AUDIO CONTROLS
3309 (638BA _2nd BT) -IM.indd 8 12/12/06 2:37:49 PM
Page 9
9
CD/MP3 PLAYBACK CONTROLS
MULT ON/OFFMULT
DSP
AUDIO
2 sec.
AUDIO
AUDIO
DSP
AUDIO
2 sec.
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
VOL
LOUD ON/OFF
DSP
AUDIO
2 sec.
AUDIO
LOUD
AUDIO
LOUD
VOL
WOOF ON/OFF
WOOF
VOL
VOL
LOCAL
AUDIO
DX/LOCAL
VOL
STEREO
AUDIO
STEREO ON/OFF
VOL
BEEP
AUDIO
BEEP ON/OFF
VOL
SCROLL
AUDIO
SCROLL 1/2
VOL
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
ESP 10/40
VOL
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
MULT
AUDIO
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
SCROLL
AUDIO
MULT
AUDIO
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
BEEP
AUDIO
SCROLL
AUDIO
MULT
AUDIO
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
STEREO
AUDIO
BEEP
AUDIO
SCROLL
AUDIO
MULT
AUDIO
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
WOOF
ESP
AUDIO
ESP 10/40
VOL
TUNE/TRACK BUTTONS Press and release
to advance to next track or to return to
the beginning of the current track (track
number will be displayed). Press and hold
to fast forward or reverse. Play will begin
at the point when you release the button.
PAUSE Press to pause CD playback. Press
again to resume playback
EJECT Press to eject CD
SHUFFLE Press to play ALL tracks
on the CD in random order.
REPEAT Press and release to continuously repeat same track. Press again to
stop repeat cycle.
CD SCAN Press to hear first several
seconds of each track on current disc.
Press again to stop intro and listen to
intro last previewed.
CD/MP3 Operation
To PLAY a CD gently insert a CD with the label side up into the disc slot. It will automatically
load and begin playing the first track.
To EJECT a CD press EJECT to stop the CD playback and eject the CD from the slot. The receiver
will automaticvally switch to radio mode.
To PAUSE a CD press PAUSE to stop playback temporarily. Press again to resume playback.
To SKIP TRACKS press the or key to choose the next or preceding track.
To FAST FORWARD or REVERSE press and hold the or key to the desired location
on the disc. Releasing the button starts playback at the location.
To REPEAT a TRACK press REPEAT to continuously repeat the current track. Press again to
return to normal playback mode.
To PREVIEW ALL TRACKS press CD SCAN to play the first several seconds of each track. Press
it again to stop an play the current track being previewed.
To PLAY TRACKS IN RANDOM ORDER press SHUFFLE to play ALL tracks on the CD in random
mode. Press again to cancel this function.
-10/+10 TRACK DOWN SELECT:
(In case of MP3 files)
+10/-10 TRACK UP SELECT:
(In case of MP3 files)
ESP MODE When press AUDIO button for
more than 2 seconds, it is activated as
10 sec. or 40 sec. of ESP mode can be
selected.
TOP Press to play first song of disc. Press to play first song of disc.
3309 (638BA _2nd BT) -IM.indd 9 12/12/06 2:37:50 PM
Page 10
10
Controls behind faceplate
How to select MP3 files
Searching Track:
• Press and hold “AS/PS”, then search track is activated. First digit will flash.
• Rotate “VOL knob to right or left”, select first digit desired.
• Press “AUDIO” button, then the first digit is fixed and second digit will flash. “AUDIO” button, then the first digit is fixed and second digit will flash.“AUDIO” button, then the first digit is fixed and second digit will flash.
• Rotate “VOL knob to right or left”, select 2�nd 3�rd respectively.Rotate “VOL knob to right or left”, select 2�nd 3�rd respectively. “VOL knob to right or left”, select 2�nd 3�rd respectively.
• Then automatically the song selected will start.
Searching Directory:
• Press and hold “AS/PS”. Press “AS/PS” again, then directory search is activated.
• Rotate “VOL knob to right or left”, you can select the desired directory.
• Press “AUDIO” button again, then the directory is fixed and the first file name is displayed.
• Rotate clockwise to select the desired song.
• Press “AUDIO” button, then the song selected will start.
Searching File Name:
• Press and hold “AS/PS”. Press “AS/PS” twice, then character search mode is activated. “*” character is displayed.
• Rotate “VOL knob to right or left”, you can select the desired letter.
• Press “AUDIO” button longer than 2 sec.
• The song with the same character you selected is displayed.
• Rotate clockwise to select the desired song.
• Press “AUDIO” button, then the song selected will start.
RESET
AUX IN
CD Loading/unloading slot
LED This LED flashes when the faceplate is
removed.
RESET Press this button with a ballpoint pen or other thin object.
The reset button is to be activated for the following reason:
Initial installation of the unit when all wiring is completed.
All the function button do not operate.
Error symbol on the display.
NOTE: If the unit does not function properly after you have
pressed the RESET button, clean the socket and the connector on the rear of the front panel with a cotton swab soaked
in isopropyl alcohol and try again.
3309 (638BA _2nd BT) -IM.indd 10 12/12/06 2:37:51 PM
Page 11
11
USB and front side AUX IN operations
CD MULTI SECTION MODE When press AUDIO button for more than 2
seconds, it is activated as selecting mode of these function.
CD MULTI ON/OFF mode is selected by rotary VOL left or right
CD MULTI ON: Read multi section CD.
CD MULTI OFF: Read first section only.
USB Port
Enhanced control of connected Portable Media such as Flash
Drives and digital MP3 Players, by using function keys on
the main unit or the remote control unit.
This unit features the latest ID3 Tag support, which allows
you to see the song�s name and which folder it�s located in,
on the LCD display.
AUX IN
Convenient easy to use front “AUX IN” input jack, allows easy
connection of Portable Media and other digital MP3 Players.
MULT ON/OFFMULT
DSP
AUDIO
2 sec.
AUDIO
AUDIO
DSP
AUDIO
2 sec.
POP --- ROCK --- CLASSIC --- FLAT --- DSP OFF
VOL
LOUD ON/OFF
DSP
AUDIO
2 sec.
AUDIO
LOUD
AUDIO
LOUD
VOL
WOOF ON/OFF
WOOF
VOL
VOL
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
ESP 10/40
VOL
DSP
AUDIO
2 sec.
AUDIO
AUDIO
LOUD
WOOF
ESP
AUDIO
* IMPORTANT INFORMATION:
Because there are a great numBer and varieties of usB products, we can not guarantee that
our product will operate 100% with these devices.
3309 (638BA _2nd BT) -IM.indd 11 12/12/06 2:37:52 PM
Page 12
12
Remote controls functions
POWER
2
INTRO
10-UP MUTE LOC10-DN
3 41
6 7 85
TOP
SEL
MENU
BAND
VOL
VOL
SHUF
ST/MO SCAN SUB
TUNE/SEEK
AS/PS
RPT
MODE
09
Tel /
*
#
DISP
Note: You can dial calls with this remote control. Please refer to “Making Calls Using the Dial Keypad”.
1. POWER ON / OFF
2. ANSWER A CALL
3. VOLUME +
4. DISP / END A CALL
5. BAND / CD PLAY / PAUSE
6. TUNE / SEEK
7. SEL / MENU
8. CD REPEAT /
AUTO STORE/PRESET SCAN
9. VOLUME -
10. MODE
11. CD PLAYER FIRST SONG
12. CD SCAN
13. PHONE NUMBER /
BUTTON 1-6: STATION
PRESETS
14. CD SHUFFLE
15. 10 TRACK DOWN SELECT
16. 10 TRACK UP SELECT
17. MUTE
18. LOC
19. STEREO / MONO MODE
20. RADIO SCAN / PHONE
21. SUBWOOFER
1
5
32 4
6
7
8
9
10
11
12
13
14
15
16
19
20
21
17
18
3309 (638BA _2nd BT) -IM.indd 12 12/12/06 2:37:52 PM
Page 13
13
HOW TO PERFORM PAIRING
Before you can dial out from the car stereo, you must first perform PAIRING. Pairing is a procedure used to connect 2 Bluetooth devices together.
1. Press and hold AUDIO button for 2 seconds.
2. Press AUDIO button repeatedly until “PAIRING” displays.
3. Press and hold AUDIO button to engage paring mode. “PAIRING” blinks on
the display.
4. Turn on the Bluetooth feature of your mobile phone. Perform “Add Bluetooth
device” from your mobile phone. The mobile will search for any Bluetooth
devices within the range. Select “BHF207C” and enter Passkey: “0000” to connect to the car audio. (Please refer to the instruction manual of your mobile
phone for Bluetooth Pairing).
5. The LCD will display “PAIRED” after successful pairing.
Note:
• If “DISCONN” shows instead of “PAIRING”, it means the head unit currently
is paired with another device. Press and hold AUDIO button to disconnect
the connection and perform steps above again.
• “BHF207C” is the Bluetooth device name of the car stereo.
• Refer to your cellular user manual for the proper procedures of pairing
Bluetooth devices.
Audio Streaming
If your phone is “A2DP” format compatible, then you can play music in your
mobile and the sound will be transferred to car head unit.
1. Make sure your mobile and the unit is properly paired and connected.
2. Play the music through your mobile music player software.
3. Press SOURCE repeatedly until “BT-PLAY” appears in the display. The sound will be transferred
to the head unit.
Making Calls Using the Dial Keypad
You can make calls directly from the supplied Dial Keypad. Before you make calls, make sure that
the devices are properly paired and the keypad cable properly connected to the back of the head
unit.
1. Press PHONE button or press and hold (*) on the keypad.
2. Enter the phone number via the keypad and press button to dial out. Press button to
make corrections when entering numbers.
3. Press button to end call.
Tips: Press PHONE on the head unit is the same as press and hold (*) on the keypad.
Answering / Hanging Up
To answer a call, press the button on the dial keypad. Speak directly to the keypad�s microphone. Once you have finished your conversation, press the button to hang up.
Calls (Outgoing, Incoming)
The unit stores all the incoming and outgoing calls. Use this feature to check the numbers and make
calls from it.
“OUT NUM” – outgoing calls made through the dial keypad.
1. Press PHONE then press and hold AUDIO button for 2 seconds. “OUT NUM” displays.
2. Press and hold AUDIO button again.
3. Rotate volume knob to search for entries and press to call.
“IN NUM” – incoming calls received.
1. Press PHONE then press and hold AUDIO button for 2 seconds.
2. Press AUDIO button repeatedly until “IN NUM” displays.
3. Press and hold AUDIO button again.
4. Rotate volume knob to search for entries and press to call.
M P3 / C D R/ C D R W p la y b a ck S638BTA
80W
PREAMP
OUTPUT
5V
x
4
CH
How to use bluetooth in your car audio
3309 (638BA _2nd BT) -IM.indd 13 12/12/06 2:37:54 PM
Page 14
14
Adding Contacts
The unit can save contact telephone number for quick access.
1. Press PHONE then press and hold AUDIO button for 2 seconds.
2. Press AUDIO button repeatedly until “ADD NUM” displays.
3. Press and hold AUDIO button again.
4. Using volume knob, enter the name of the contact. Press AUDIO to save each character entered.
Press and hold AUDIO to save name.
5. Enter the phone number. Press AUDIO to save each number entered.
6. Press and hold AUDIO to save entry.
Finding Contacts
After adding contacts, you can use this feature to find them.
1. Press PHONE then press and hold AUDIO button for 2 seconds.
2. Press AUDIO button repeatedly until “FIND NUM” displays.
3. Press and hold AUDIO button again.
4. Using volume knob, select the name of the contact and press to call.
Deleting Contacts
1. Press PHONE then press and hold AUDIO button for 2 seconds.
2. Press AUDIO button repeatedly until “FIND NUM” displays.
3. Press and hold AUDIO button again.
4. Rotate volume knob until the name of the contact you want to delete displays.
5. Press and hold for 2 seconds to delete contact.
How to Set Incoming Call Melody
1. Press PHONE then press and hold AUDIO button for 2 seconds.
2. Press AUDIO button repeatedly until “MELODY” displays.
3. Rotate volume knob to the desired melody.
How to Set Incoming Call Ring Volume
1. Press PHONE then press and hold AUDIO button for 2 seconds.
2. Press AUDIO button repeatedly until “RING” displays.
3. Rotate volume knob to the desired level.
How to Set Conversation Volume
1. Press PHONE then press and hold AUDIO button for 2 seconds.
2. Press AUDIO button repeatedly until “TEL” displays.
3. Rotate volume knob to the desired level.
Disconnect Paired Devices
You can disconnect to an already paired Bluetooth device from your car stereo.
1. Press PHONE then press and hold AUDIO button for 2 seconds.
2. Press AUDIO button repeatedly until “DISCONN” displays.
3. Press and hold AUDIO button again to disconnect.
3309 (638BA _2nd BT) -IM.indd 14 12/12/06 2:37:55 PM
Page 15
15
GREY +
GREY/BLACK –
FRONT
RIGHT
SPEAKER
VIOLET +
VIOLET/BLACK –
REAR
RIGHT
SPEAKER
FRONT
LEFT
SPEAKER
REAR
LEFT
SPEAKER
+ WHITE
– WHITE/BLACK
+ GREEN
– GREEN/BLACK
ISO A/B PLUG
AMP
TURN ON
BLUE
BLUE/WHITE
IGNITION SWITCH (12 V)
RED
CONSTANT
12 VOLTS
YELLOW
BLACK
GROUND (–)
ANTENNA CONTROL
L (WHITE)
SUB WOOFER
LINE IN
R (RED)
L (WHITE)
LINE OUT
(REAR)
R (RED)
LINE OUT
(FRONT)
L (WHITE)
ANTENNA
CONNECTOR
ISO CONNECTOR
R (RED)
B
A
DIAL KEYPAD
Wiring diagram
Auxiliary input feature
This CD Receiver features an Auxiliary Input jack on the back side of the unit.
An external audio source such as a portable audio player or a DVD player may be connected
via this input jack.
3309 (638BA _2nd BT) -IM.indd 15 12/12/06 2:37:55 PM
Page 16
16
3309 (638BA _2nd BT) -IM.indd 16 12/12/06 2:37:56 PM
Page 17
17
Specifications
638BA
MP3-Compatible AM/FM CD Receiver
CD/MP3 PLAYER
Signal to Noise Ratio > 60dB
Channel Separation > 45 dB
Frequency Response 20Hz - 20 kHz
RADIO
FM Section:
Frequency range 87.5-107.9 MHz
Intermediate frequency 10.7 MHz
Sensitivity 3 µV
Stereo separation 30 dB
Signal to noise ratio 50 dB
Channel step 200 kHz
AM Section:
Frequency range 530-1710 KHz
Intermediate frequency 450 KHz
Usable Sensitivity 32 dBµV
TONE CONTROLS
Bass (at 100Hz) +/- 10 dB
Treble (at 10kHz) +/- 10 dB
LINE-OUT
Output 5 V (max.)
Impedance 10k Ohm
AMPLIFIER
Maximum output power 80 watts x 4 channels
GENERAL
Power Supply 12V DC (10.8-15.6V allowable)
Chassis dimensions 7” x 6-1/4” x 2” (178 x 159 x 51 mm)
Weight 4.4 lb. (2 kg)
Instructions on environment protection
Do not dispose of this product in the usual household garbage at the end of its lifecycle; hand it over at a collection point for the recycling of electrical and electronic
appliances. The symbol on the product, the instructions for use or the packing will
inform about the methods for disposal.
The materials are recyclable as mentioned in this marking. By recycling, material recycling or other forms of reutilization of old appliances, you are making an important
contribution to protect our environment.
Please inquire at the community administration for the authorized disposal location.
3309 (638BA _2nd BT) -IM.indd 17 12/12/06 2:37:57 PM
Loading...