Boss RVH1004Z, RVH1008Z, RVH1016Z, US411Z, US811Z User Manual
...
SW-11Z-I1-V1.0-E
l
User Manual
RVH1004Z/1008Z/1016Z
US411Z/811Z/611Z
X11Z
H.264 DVR
This document contains preliminary information and subject to change without notice.
1
WARNING
NOTE:
Disposal of Ol
d Electrical & Electronic Equipment
(Applicable in the European
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
This symbol is intended to
alert the user to the presence
of unprotected “Dangerous
voltage" within the product's
enclosure that may be strong
enough to cause a risk of
electric shock.
This equipment has been tested
and found to comply with the limits for a
class digital device, pursuant to part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
interference to radio communications.
Operation of this equipment in a residential
area is likely to cause harmful interference
in which case the user will be required to
correct the interference at his own expense.
Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated
as household waste. Instead it shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of this
product. The recycling of materials will help to conserve natural resources. For more detailed
information about recycling of this product, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
Notice: Ghosting or fractured images may occur on the screen when there is a suddenly surge
or lightning stroke which cause damage on IC in the DVRs.
2
Table of Contents
CHAPTER 1 MAIN MENU SETUP ____________________________________ 4
1-1 RECORD SETUP ____________________________________________ 5
1-1.1 Quality & Frame Rate Setup _____________________________ 6
1-2 EVENT SETUP ______________________________________________ 6
1-2.1 MOTION SETUP ________________________________________ 7
1-2.1.1 MOTION AREA SETUP ______________________________ 7
1-2.2 SENSOR SETUP ________________________________________ 8
1-3 SCHEDULE SETUP __________________________________________ 9
1-3.1 Schedule Record Setup _________________________________ 9
1-3.2 Holiday Setup _________________________________________ 10
1-4 CAMERA SETUP ___________________________________________ 10
1-5 ACCOUNT SETUP __________________________________________ 11
1-5.1 Permission Setup ______________________________________ 11
1-5.2 User Picture Setup ____________________________________ 12
1-6 NETWORKING SETUP _______________________________________ 12
1-6.1 NETWORKING SETUP __________________________________ 13
1-6.1.1 DHCP ___________________________________________ 13
1-6.1.2 LAN _____________________________________________ 13
1-6.1.3 ADSL ____________________________________________ 14
1-6.1.4 3G ______________________________________________ 14
1-6.2 HTTP Setup ___________________________________________ 15
1-6.3 DDNS Setup __________________________________________ 16
1-6.4 Mail Setup ____________________________________________ 17
1-7 PTZ & RS485 SETUP _______________________________________ 18
1-8 SYSTEM SETUP ____________________________________________ 19
1-8.1 DISPLAY SETUP _______________________________________ 19
1-8.2 DATE/TIME SETUP _____________________________________ 20
1-8.2.1 CHANGE DATE & TIME ____________________________ 21
1-8.2.2 TIME ZONE AND DAYLIGHT SAVING TIME SETUP ____ 21
1-8.2.3 INTERNET TIME SETUP ___________________________ 22
1-8.3 BUZZER & RELAY SETUP ______________________________ 22
1-8.4 SPOT SETUP__________________________________________ 23
1-9 UTILITY SETUP ____________________________________________ 24
1-10 DIAGNOSTIC ______________________________________________ 25
CHAPTER 2 BACKUP & SEARCH ___________________________________ 26
2-1 BACKUP SETUP ____________________________________________ 26
2-2 SEARCH SETUP ____________________________________________ 29
2-2.1 EVENT SEARCH _______________________________________ 29
2-2.1.1 CRITERIA SETUP FOR EVENT SEARCH _____________ 30
2-2.2 TIME SEARCH_________________________________________ 31
CHAPTER 3 Remote Software Installation and Setup ___________________ 32
3-1 AP Software Installation and instruction ______________________ 32
3-2 How to do remote monitoring through IE _____________________ 34
3-3 How to do remote monitoring through JPEG VIEWER(Only Monitor
Function) _____________________________________________________ 35
3-4 AP Software Operation ______________________________________ 37
CHAPTER 4 Specification __________________________________________ 39
3
CHAPTER 1 MAIN MENU SETUP
To enter the main menu and set up DVR, log-in account and user password are required.
The default password of the administrator is “123456”. Please check the “Account Setup” for
related setup of other log-in users.
Table 1-0.1 Some definition of virtual keyboard.
Item Description
Switch between capital and small letters.
/
Switch between numbers and letters.
Press to cancel the setup, and re-choose the login
account.
Delete the last character.
Enter to identify the password. It will enter the set
up menu, If the password is verified.
Space key
4
Table 1-0.2 The operation of remote control under the setting menu
Item Description
Switch to different options under one item
Switch to different items
MENU Save setup and back to LIVE mode
ESC Back to Upper level of menu without saving
ENTER Enter the menu, or display virtual keyboard
PS. The initialization of new-installed HD is required before recording, please refer to “ UTILITY
SETUP” for detail.
1-1 RECORD SETUP
Item Description
Select STOP to stop recording or OVERWRITE to reuse the
HDD when HDD is full
Stop
HDD FULL
「
Overwrite
「
OSD position X Setup OSD X axis
OSD position Y Set up OSD y axis
OSD position setup Set up OSD axis
Video Preservation
Quality & Frame Rate
Setup
Setup the video preservation period. Recorded video will be
deleted automatically after expiry of preservation period.
Setup the quality and frame rate for each channel under normal
recording and event recording type.
Note：：：：4CH DVR will display 4 channels and 8CH DVR will display 8 channels.
Stop Recording
」：
Start to overwrite that begin from the oldest data
」：
of HDD, and continue to record.
5
1-1.1 Quality & Frame Rate Setup
Item Description
Normal setup/
event setup
Resolution
Record Type You can setup quality and FPS separately for record type.
No. Check/uncheck the box enable/disable selected channel recording
Quality Select quality: Below Basic/ Basic/ Normal/ High/ Highest
FPS
Auto Assign each channel with its maximum accessible fps
Note：：：：4CH DVR will display 4 channels and 8CH DVR will display 8 channels.
Select recording mode
Select recording resolution: NTSC:352x240, 704x240, 704x480
PAL:352X288,704X288,704X576
Select recording frame rate.
(The number of sheets in accordance with the actual models)
1-2 EVENT SETUP
Item Description
Motion Setup Enter to set up motion detection
Sensor Setup Enter to set up sensor detection
6
1-2.1 MOTION SETUP
Item Description
Alarm Duration(Seconds)
1~16 You can setup independently for each channel.
Enable Check the box to Enable/Disable motion detection for each channel.
Sensitivity
Motion Area Setup Enter to setup motion detection area
When motion detect，the number of seconds continuous alarm
Drag the white bar or press ◀ ▶ to set up Sensitivity from
value 0 to 10 for each channel. The higher value you set the
higher sensitivity it will be.
Note：：：：4CH DVR will display 4 channels and 8CH DVR will display 8 channels.
1-2.1.1 MOTION AREA SETUP
The motion detection has been divided into 22x18 grids. The default detection area is
full screen as it marked in transparent for local DVR and purple for remote access.
Areas deselected for motion detection are marked in red for both local and remote site.
7
Item Description
Mask Mouse Selection Switch between “select” and “deselect” for cursor-dragging function
All Area Detection Select entire screen as detection area.
Mask All Area Deselect entire detection area.
Continue Continue setup
Exit & Save Save setup and leave
Exit & Discard Cancel setup and leave
1-2.2 SENSOR SETUP
Item Description
Sensor Popup Check the box to Enable/Disable popup screen function for all
channels. When Sensor is detected in LIVE mode, the detected
channel image will pop up in full screen display.
All Off Set all sensor off
All Low Set all sensor polarity low
All High Set all sensor polarity high
Sensor Polarity
Note：：：：4CH DVR will display 4 channels and 8CH DVR will display 8 channels.
Click or press ▼ to select between HIGH, LOW voltage for triggering
sensor detection or OFF to turn off polarity for each channel
Low Polarity：Sensor has not been triggered. When connected,
sensor will be turned on..
High Polarity：Sensor has been triggered. When connected, sensor
status will be turned off..
Off ：Sensor is deactivated, and will not be turned on/off.
8
1-3 SCHEDULE SETUP
Except from starting recording manually, you can also setup the recording time by weeks
and schedule including normal, motion detect, and recording type.
Item Description
Page Each page provides 10 schedules for setup. 5 pages in total.
Holiday Setup Enter to setup holiday, up to 50 days, other than weekends,.
View Event/ Motion/
Sensor Setup
Note：：：：4CH DVR will display 4 channels and 8CH DVR will display 8 channels.
View Normal/ Motion/Sensor
1-3.1 Schedule Record Setup
Click on the time on the left side. The setup menu will be displayed. You can have
detail setup by dates, Time and event.
9
1-3.2 Holiday Setup
Since holidays are different by different country and region, you can setup the holiday of
your location accordingly.
1-4 CAMERA SETUP
Item Description
1~16 You can setup independently for each channel.
Mask Check the box to Enable/Disable mask function for LIVE mode
Sharpness
Brightness
Contrast
Saturation
Name Set up name of each channel
Volume Audio volume under LIVE mode and recording mode can be adjusted.
Note：：：：4CH DVR will display 4 channels and 8CH DVR will display 8 channels.
Drag the bar or press ◀ ▶ to adjust Sharpness of your camera from value 0 to 15.
Drag the bar or press ◀ ▶ to adjust Brightness of your camera from value 1 to 255.
Drag the bar or press ◀ ▶ to adjust Contrast of your camera from value 1 to 255.
Drag the bar or press ◀ ▶ to adjust Saturation of your camera from value 1 to 255.
10
1-5 ACCOUNT SETUP
The Account Setup menu is used to provide role-based permission independently setting for
each user (maximum of 4 users) to access DVR over network. The default admin account and
password is “admin” and “123456”
(The default password remains the same after firmware upgrade)
Item Description
No. Check to activate the user’s account.
Username Set up username
Password Set up password for each user. Password is 8-digits required and can
be mixed by letters and numbers with case-sensitive. Letters can be
mixed with capitals or lowercases.
Permissions Set up Permissions for each user
Change Admin
Password
Picture Change user’s picture
Change administrator’s password
1-5.1 Permission Setup
The Account Setup is set to provide individual user (maximum of 4 users) role-based
permissions, including access to Setup menu, Network operation, PTZ function, Playback,
Utility, Backup, Password expiry date and Mask on specific channels while playing back.
11
1-5.2 User Picture Setup
User can select picture wished to be changed to from hard drive.
1-6 NETWORKING SETUP
Item Description
Connect type
HTTP Setup Enter to set up HTTP
DDNS Setup Enter to set up DDNS
Mail Setup Enter to set up mail
3G Setup Enter to set up 3G network
Setup mode for network connection: (ADSL、、、、DHCP、、、、LAN、、、、3G).
12
Loading...