BOSS BV9.2BA, BV9.2TA, BV9.2GA User Manual

9.2 TFT-LCD DVD COMBO MONITOR

OWNER S MANUAL

Contents

Caution

Features and Controls Monitor/DVD Player Remote Control

Power and Mode Selection Releasing The Monitor Turning on The Monitor Mute Function

Selecting an AV mode

Picture Control Contrast/Brightness/Color

DVD Setup Setup Menu General Setup TV Aspect Ratio

Angle Viewing OSD Language Captions Screen Saver

Last Position memory

Audio Setup Dolby Digital Setup Equalizer Settings Video Setup Quality Preferences Setup TV Type

PBC Audio Subtitle Disc Menu Parental

Country Region Default Password Setup Password Mode Password Change

DVD Functions Eject

Vol+/Vol-

Mute

Play or Pause

Audio

Stop

Arrows

Setup

Display

Number Buttons Subtitle

Title

Slow

Fast Reverse Searching

Fast Forward Searching

Repeat A-B

Repeat

NTSC/PAL

Angle

15 15

PBC Zoom

Go To

16 16

Connection Diagram

Installation

18 21

Disc Information

Troubleshooting

21 21

Specifications

21 22 22

22 22 23

23 23

24 24

24 25

25 25

25 26

26 27 27 27 28 28 29 29

29 30 30

30 31 31 31

Caution

Please read and observe all warnings and instructions in this manual and those marked on the unit. Retain this booklet for future reference.

There are two kinds of alarm symbols as follows:

The lightning bolt with arrowhead inside in an equilateral

WARNING

CAUTION

O W

E R

MEN

triangle is intended to alert the user to the presence of

dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to people.

The exclamation point inside an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING

Installation of all TV monitors must be out of the driver s field of vision.

Do not mount the product where it will obstruct the deployment of the airbag or in an area where it would affect the driver s ability to control the vehicle. Also be careful to avoid mounting the product where it can become hazardous during sudden stops or in the event of an accident.

Do not try and service these products yourself, a qualified service center or factory service center for all repairs.

Be careful not to drop or apply under pressure to the front panel of your video monitor. If the screen cracks due to misuse, your warranty will be void!

Be careful not to overload your cigarette lighter plug by adding more than one device at a time.

locale

Use extra caution with any liquids in your car. If you or your child spills any liquid on these products, pull your vehicle to the roadside

or wipe the products with a towel. Do not operate the equipment until all liquids have either evaporated or you have had the monitor inspected at a service center by a qualified technician. Severe harm or danger can result.

and turn the key off to disconnect

Use only a damp cloth to clean the screen and use only purified water on the cloth. wring out all excess water prior to wiping the screen. Do not use any cleaners or chemicals to clean the screen. In most cases a dry cloth will do!

SPECIFICATIONS

Caution

CAUTION

Power

Screen Format

Resolution Pixel

Color System

A/V Input

A/V Output

Dimension

DC 12V

16:9

1152x234

NTSC/PALAuto Select

DVD-AV1-AV2

1EA

12.1(L)X10.8(W)X2.3(H)inch

Note: This equipment has been tested and has been found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference. In some cases, the user will be required to correct the interference at his own expense.

Quality installations are best performed by qualified and certified installers.

Don t touch the unit if there is a flash of lightning. You may receive an electric shock.

Do not cover or stop up heater ducts or vents. It may cause a fire or receive an electric shock.

Watching the monitor for an extended period of time without the engine running may deplete the vehicle s battery charge.

This product is designed for operation with a 12 Volt DC, negative ground vehicle. It is not suitable for operation under other conditions or voltages.

Do not bring magnetic devices such as credit card or magnetic card near the magnets.

Operating Notes

1. The operating temperature of this product is limited to 14 ~+140 F.

2. If your vehicle is extremely hot or cold you must allow time for your air conditioner or heater to cool or heat the vehicle until operating temperatures have returned to normal operating ranges.

3. Optimal picture quality is achieved when viewed from directly front of the monitor (+/-30degrees).

4. Do not open the housing and yourself. Refer servicing to qualified personnel.

5. DVD Players use an invisible laser beam which can cause hazardous radiation exposure. Be sure to operate the unit correctly as instructed.

6. Do not cut the car power supply off while a disc is playing. It can cause damage to the DVD Player.

attempt to make any repairs

Monitor / Player System Components

Troubleshooting

Remote Control

Monitor/DVD Player

Symptom

Buttons do not work.

No sound

Remote controldoes not workproperly.

Unable toreceive TV broadcast.

Items to Check

Is thepower turned on?

Is theaudio which is connected with the audiocable set to receive the DVDsignal output?

Is audiocable is connected securely? Is themonitor which is connected

with the audio cable turned on?

Is thedigital audio output set in thecorrect position?

Is theremote control facing the remote sensor?

Is thedistance too far?

Is thereany obstacle in the middle?

Is thebattery weak?

Is theantenna connected properly?

Actions to be Taken

Check the car battery capacity.

Select the correct input mode for the audio receiver. Connect the audio cable into the jacks securely. Turn on the monitor connected with the audio cable. Set the Digital Audio Output to the correct position,

and thenturn on the DVD player again by pressing the POWERbutton.

Point the remote control toward the remote sensor of the product.

Use the remote control within 15 feet. Remove the obstacle. Replace with new battery.

Check antenna connection.

Moisture or condensation on lens

When a disc is brought from a cold environment to a warm one, there may be moisture on the the disc, or condensation on the pickup lens. It will affect disc playback.

1. Remove the disc from the DVD player.

2. Turn on the power and leave it on for an hour to vaporize the condensation.

Wireless Headphones

Disc Information

DVD features

DVD discs provide high-resolution images with high-quality sound and surround sound effects. This DVD player can play not only DVD discs of various versions, but also S-VCD, VCD, audio CD and MP3 discs.

Discs that cannot be played

DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. In addition, a CD or a CD-RW which was recorded on special software cannot be played.

Region code

Your DVD player is designed and manufactured to region management information that is recorded on a DVD disc. Please check the region code. 1: North America 2: Japan 3: Korea and Southeast Asia 4: Australia, Mid & South America 5: Russia 6: China

This product incorporates copyright protection technology that is protected by methods claims of certain U.S. Patents and other intellectual property rights owned by the Macrovision Corporation and other rights. Owner s use of this copyright protection technology must be authorized by the Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by the Macrovision Corporation.

Features And Controls

POWER Button

Dome Light Button

AV Select Button

MENU Button

+/- Buttons

PLAY/PAUSE Button

EJECT Button

Disc loadingslot

How to handle the disc

Don t touch the shiny side of the disc (the side with the embedded information). Don t stick a label or a glue-based note on either side of the disc. Don t use discs that have glue or a damaged label with exposed adhesive reside. It might result in damage to your DVD player. Don t put discs in the sunshine. Park your car in the shade.

How to handle the discs

Only use round discs. Discs with other shapes like a star, a heat, etc. may cause damage to the player.If a disc is dirty, wipe softly with a wet cloth and then with a dry one. Before playback, wipe the disc outward from the center with a clean cloth. Do not use any type of solvent such as thinner, benzene, commercially available cleaners or antistatic spray. To avoid damaging your DVD player, don t use a scratched disc.

Caution

Do not bring magnetic devices such as credit cards or magnetic cards near the monitor.

AUX Input Jack

+ 14 hidden pages