Boss BV8860B, BV8855T, BV8850 User Manual

Page 1
-1-
Precautions .....................................
Safety Information.........................
Disc Notes ....................................
Installation ....................................
Electric Connection ......................
Remote Control ...........................
Basic Operations
DISC Operations ...........................
DISC Special Functions ................
Detaching the control panel ..............
Changing the control panel ...............
Touch Panel
Unit Keys ......................................
TFT Monitor
........................
Audio Quality Adjustments
..................
Listening to the radio ......................
Storing stations in memory ..............
Listening to a preset station ............
RDS Function ................................
Basic Operations ............................
Select Playback Mode .....................
AUX Operation ...............................
On-Screen Disc Operations .............
Selecting audio languages ..............
....................................
Adjustment ................
Rear View Camera
...............
Setting Audio Mode .........................
Reset Factory Settings
..........................
27
27
27
28
30
30
31
32
35
36
37
37
28
33
35
38
39
7
8
13
13
14
17
17
17
18
18
1
1
2
22
24
25
26
27
2
3
4
5
9
10
16
19
27
9
9
20
20
2
Selecting Subtitles ..........................
Selecting multi-angle views ..............
Title menu function ..........................
General Setup ................................
Speaker Setup ...............................
Dolby Digital Setup ........................
Preferences Setup ..........................
Defaults Table ................................
USB Operations ..............................
SD/MMC Card Operations ...............
MP3/WMA/JPEG Play .....................
MPEG4 Play ...................................
Setup .............................................
BLUETOOTH .................................
Other Main Operations ...................
Specifications ...............................
Trouble Shooting ..........................
Contents
BV8860B
In-Dash AM/FM-RDS/Bluetooth DVD/MP3/CD ReceiverWith
6.2 WidescreenTouchscreen TFT Monitor With Front Panel USB Port and SD/MMC Card Slot
Page 2
-2-
Precautions
THANK YOU FOR PURCHASING THIS CAR DVD PLAYER .
Before operating the unit, read this manual thoroughly and keep it handy for future reference . To avoid injury or accident , read the following precautions before installing and operating the unit .
ABOUT THE LIQUID CRYSTAL DISPLAY (LCD) PANEL
Do not press on the LCD panel on the unit as doing so can distort the picture or cause a malfunction . The picture may become unclear , or the LCD panel may be damaged .
DO NOT install any receiver in locations where;
- it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.
- it may obstruct the operation of safety devices such as air bags, as this may result in a fatal accident.
- it may obstruct visibility.
DO NOT operate any receiver while manipulating the steering wheel, as
this may result in a traffic accident.
The driver must not watch the monitor while driving. IF THE DRIVER watches the monitor while driving, it may lead to
carelessness and cause an accident.
IF YOU NEED to operate the receive while driving, be sure to look ahead
carefully or you may be involved in a traffic accident.
IF THE PARKING BRAKE is not engaged.“ ParkingBrake” flashes on the
monitor, and no playback picture will be shown.
- This warning appears only when the parking brake wire is connected to
the parking brake system built in the car ( refer to the electric connection)
ON INSTALLATION
NOTES ON CLEANING
-Clean the LCD panel with a slightly damp soft cloth.
-Do not use solvents such as benzine, thinner, commercially available
cleaners or antistatic spray .
-Do not use alcohol to clean the screen . If your car was parked in a cold or hot place, the picture may not be clear . The monitor is not damaged . The picture will become clear the temper­ature in your car becomes normal .
Page 3
-3-
Safety Information
REGION MANAGEMENT INFORMATION:
This DVD Player is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD Player, this DVD Player cannot play this disc.
CAUTION:
THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD PLAYER CORRECTLYAS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.
COPYRIGHT PROTECTION
This product incorporates copyright protection technology that is protected
by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.Use of this copyright protection technology must be authorized by Macro vision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Page 4
-4-
Disc Notes
Preparing New Discs with Spots
Rough
A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ball point pen or pencil as shown on the right. To remove the rough edges, press the side of the pen or pencil against the inside and outside edges of the disc.
Rough spots on outside edge
Ball point pen or pencil
Rough spots on inside edge
Do not touch the underside of the disc
Do not bend
Wipe the disc from center toward the outside edge
Label side up
Disc Cleaning
Use a dry soft cloth to wipe the surface. If the disc is quite dirty, use a soft cloth slightly moistured with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.
Handling and Cleaning
Dirt, dust, scratches and warping disc
will cause misoperation. Do not place stickers or make scratches on discs. Do not warp discs.
A disc should always be kept in its case when not in use to prevent from damaging. Do not place discs in the following places:
1.Direct sunlight
2.Dirty, dusty and damp areas
3.Near car heaters
4.On the seats or dashboard
Discs which cannot be played with this player
DVD-RAM
CDV
CDG
Note:
A disc may become somewhat scratched (although not enough to make it
unusable) depending on your handle it and conditions in the usage environment. Note these scratches are not an indication of any problem with the player.
Disc formats supported by this player
DVD
VCD
CD
MP3
Audio and Video Discsize12cm
Audio and Video Discsize12cm
Audio Discsize12cm
Audio Discsize12cm
Page 5
Installation
-5-
30
1. Choose the mounting location where the unit will not interfere with the normal driving function of the driver.
2. Before finally installing the unit, connect the wiring temporarily and make sure all connected up properly and the unit and the system work properly.
3. Use only the parts included with the unit to ensure proper installation. The use
unauthorized parts can cause malfunctions.
4. Consult with your nearest dealer if installation requires the drilling of holes or
modifications of the vehicle.
5. Install the unit where it does not get in the driver s way and cannot injure the
passenger if there is a sudden stop, like an emergency stop.
. If installation angle exceeds 30 from horizontal, the unit might not give its
performance.
NOTES:
it is
of
other
. Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration. 7 optimum
'
6
DIN FRONT/REAR-MOUNT
This unit can be properly installed either from "Front"(conventional DIN Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For details, refer to the following illustrated installation methods.
Revoving the unit
1. Press the button to release the front panel .REL
2. Remove the control panel .
Page 6
Installation
-6-
Installation the unit
3. Remove the PLASTIC COVER of the both sides away
4. Insert the two KEY PLAT into the grooves at both sides of the unit as shown in figure until they click .
PLASTIC COVER
KEY PLATE
5. Pulling the levers makes it possible to remove the unit from the dashboard .
DASH BOARD
METAL MOUNTING STRAP
HEX NUT
SPRING WASHER
PLAIN WASHER
TAPPING SCREW
CONSOLE
SLIDE BRACKET HOUSING
HEX BOLT
Page 7
-7-
Installation
How To Remove And Install The Front Panel
When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder.
2). Pull-off the front panel and keep the front panel into the case .
PROTECTIVE CASE
Detaching The Front Panel
Before detaching the control panel, be sure to turn off the power.
1). Press the release button and the left hand side of front panel will release.“REL”
Attaching The Front Panel
1). First insert the right hand side of the front panel into the hollow of the unit . (NOTE : the “bulge” point on the panel must be attached into the hollow of the unit .)
2). Gently push the left hand side of the front panel until you feel a “ Click” .
Hollow
Bulge
RELEASE BUTTON
PUSH
Page 8
Panel Angle Adjustment
-8-
Caution:
Do not insert your finger behind the control panel.
When you want to change the viewing angle of the operating unit to play, you can touch the section on touch screen (or press the button on the front panel) repeatedly to select the desired angle as follows:
ANGLE1-ANGLE2-ANGLE3-ANGEL4-ANGLE 1 .
CHANGING THE CONTROL PANEL ANGLE
ANGLE 1 ANGLE 2
ANGLE 3ANGLE 4
Page 9
Electric Connection
WIRING CONNECTION
-9-
Note : The "PARKING BRAKE" wire must be connected to the parking brake system of your car. When the parking brake is engaged, the LCD screen will be allowed to view your video. If not, the screen will produce an image saying, "PARKING BRAKE" This is a safety feature designed for the driver not to watch a video while driving. The video output on this unit is not affected by this.
FRONT RCA WHITE L
FRONT RCA RED R
VIDEO OUT 1 YELLOW
FRONT RCA OUTPUT
CABLE
GREY
GREY/BLACK
FRONT
Rch SPK.
VIOLET
VIOLET/BLACK
WHITE
WHITE/BLACK
GREEN
GREEN/BLACK
REAR
Lch SPK.
BLUE
FUSE
GROUND(B-)
IGNITION
SWITCH(B+)
RADIO ANTENNA JACK
RED
YELLOW
BLACK
MAIN UNIT
REAR
Rch SPK.
FRONT
Lch SPK.
CHOKE BOX
RCH RED
LCH WHITE
REAR RCA OUTPUT
CABLE
GREY SUBWOOFER VIDEO OUT 2 YELLOW
COAXIAL OUT BROWN
RCA CABLE
WHITE
(B+)12V REAR CAMERA SWITCH
GREEN
YELLOW
REAR CAMERA INPUT
(B-)PARKING BRAKE
ISO CONNECTOR
FUSE
CONSTANT
12 VOLTS
Power/Antenna
Remote AMP
Turn ON
Page 10
Remote Control
-10-
6
5
Button
Ref #
Function
1
2
Redial/
CLK
Press it briefly to view the clock time , Press again to return to normal display mode . Press longer to set the time .
PAIR/
Press it to use the Bluetooth function , refer to the page 33 .
3
STOP
Press once to pause playback. Press PLAY/PAUSE to resume playback. Please note: if you press STOP twice, playback will start at the beginning of the disc.
SETUP
4
Press this button to open the SETUP menu.
MO/ST (AUDIO)
In Radio mode, press this button to change between Mono and Stereo reception modes (when a station is weak, sometimes switching to Mono will improve sound quality). In Disc Playback mode, pressing this button opens theAUDIO setup menu for making changes to the way the soundtrack is reproduced.
SUBTITLE LOCAL/ DISTANT
In DVD Disc Playback mode, pressing this button will allow you to change the subtitle language on discs which have this as an option. In Radio mode, press this button to change the radio reception sensitivity in stations are near or far.
7
Press this button to use the Bluetooth function, refer to page 33.
17
15
19
13
14
7
2
6
11
18
3
16
5
20
1
21
26
9
12
10
4
8
25
23
24
22
Page 11
Remote Control
-11-
Button
Ref #
Function
8
9
GOTO
Press it button to begin playback at a moment in the program you designate. Use number buttons to enter the data that is needed. In Bluetooth menu, it serves as the button on your mobile handset.
/
Press these buttons to skip ahead or back one track. (Note: In DVD mode, press continually the twice to skip back one)
10
SEL
Press this button repeatedly to cycle through the various audio and video adjustments you can make: Volume, Bass, Treble, Balance, Fader, Color, Brightness, Contrast and Tint.
11
VOL+/-
Use these controls to adjust the volume level.
Press to navigate the various menus present in the product.
12
///
Press this button briefly to display the root level directory of a DVD disc. Press and hold this button to turn on or off the SUBWOOFER output.
Menu SubWoofer
()
13
14
BAND (OSD)
In Radio mode, press this button repeatedly to switch between the five radio bands: FM1 > FM2 > FM3 > AM1 > AM2. In Disc Playback modes, Press this button to see information about the disc currently in play.
/MOD
15
Press this button to turn the unit ON , press and hold to turn the unit OFF. Press it briefly to select the Disc, Radio , AUX In , BT Music mode.
PLAY/ PAUSE
16
In Disc Playback mode, press to pause playback. Press again to start where playback stopped.
MUTE
17
Press this button to turn off the audio. Press again to restore the sound to its prior volume level.
TITLE/ PBC(A/P)
18
When playing a DVD, pressing this button will open the TITLE menu which is recorded on the DVD. When playing a VCD disc, press this button to create a PBC (Playback Control) menu for the disc to assist in making playback selections. In Radio mode, press and hold this button to start the Auto-Program mode, during which the tuner will scan for all strong stations and assign them to the radio preset buttons.
Press this button to adjust the screen viewing angle (see page 8).
19
ANGLE
20
For DVD discs which have alternate viewing angles encoded, when you see the "angle mark" symbol advising you that these angles are available, press this button to see them.
EQ/LOUD
21
Press repeatedly to cycle through the different equalizer curve presets you may wish to use for enhanced listening.
/
22
In Disc Playback mode, press for fast forward/reverse playback.
Page 12
Remote Control
-12-
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal
receiver).
Operation angle: About 30 degree in each the direction of the front of the IR mark.
Preparing the Remote Control
1. First push to inside as the direction indicated by the arrow (See )And then
Remove the battery holder as the direction indicated by the arrow (See ).
2. Replace the battery Set a new battery property with (+)side up as illustrated
(See ).
3. Insert the battery holder. Push in the holder to the original position(See ).
1
2
3
4
Inserting the Battery
Note :
The lithium cell in the battery compartment of remote control has been secured for
transport with a foil . Before initial use please remove this foil so that the remote
control is ready for operation .
Button
Ref #
Function
0-9
These buttons are used for numeric entry in many different menus. In addition, in Radio Mode (when RDS is engaged), 0 serves as the TA button and 9 serves as the AF button.
24
+10/
25
1-6
26
Six numbered preset buttons store and recall stations for each band.
23
ENTER
This button is used to confirm selections and settings within many of the menus in the OSD system.
This button is used with the other number buttons for use with two-digit number entries. In Bluetooth menu, it serves as the button on your mobile handset.
Page 13
Control Panel
Touch Panel
Key Functions
-13-
Touch Screen Key :
MODE
Operating mode selection
MUTE ON
To switch of the sound
Loading and ejecting the DVD/CD
VOLUME-
Decrease the volume level
Changing the viewing angle of the operating unit
SEL
Select the menu of the Picture/Sound
VOLUME+
Increase the volume level
Registering devices with one another
PAIR
Calling up the Bluetooth menu
DIAL
Redialling
REDIAL
Next menu
VOLUME+VOLUME-
MODE MUTE ON
PAIR
DIAL
REDIAL
SEL
REL
Page 14
-14-
Unit Keys :
Control Panel
1 (POWER On/Off )/MODE BUTTON
Press this button to switch the device on. WELCOME appears in the display. Press it again to switch the device off. SEE YOU appears in the display. In playback mode, you can use the button to select the input mode by pressing repeatedly until the proper one is found :
DISC > AUXIN >RADIO >BLUETOOTH MP3 .
2 ANGLE (Screen position)
Press this button repeatedly to cycle through the different positions.
3 MUTE/PTY BUTTON
Press this button briefly to select the MUTE or NOT .
press this button and hold for a bout 2 seconds to select the
of the program type (examples of such types of program are : )
In Radio Mode, PTY
NEWS, POP.....
4/5 / BUTTONS (TUNE, SEEK, TRACK, SKIP UP/DOWN)
A) In DISC, USB mode:
if you wish to jump forwards or backwards press briefly the / button . (Note: in DVD mode, press the button continually twice to skip back one track during playback.) Note: For some VCD 2.0 dics (PBC-playback control), and buttons may be unavailable. To go through the tracks , press longer (for more than 2’s ) the / button , FF X2 appears in the display. Press it again, the speed of rapid forward/ reverse changes according to the disc as follow:
DVD/VCD/CD/MP3:
Normal Playback 2x 4x 8x 16x
1
2
3
4
6
5
7
8
9
11
12 13
15
16
10
REL
14
Page 15
Control Panel
-15-
6 SELECT BUTTON
To access the available adjustment settings for audio and video, press this knob repeatedly to cycle through and select them:
Tint Contrast Bright Color Fader
Buzzer Volume Bass Treble Balance
7 /CH 1-6 BUTTON(RADIO PRESET)
In Disc Playback Mode
In Radio Mode
A)
Press this button to pause playback, press it again to resume playback.
B)
Press this button repeatedly to preset station. ( refer to see page 20 .)
8 BAND BUTTON
press it repeatedly to select the desired radio band: FM1, FM2,
FM3, AM1(MW1), AM2(MW2) .
In Radio mode,
9 (EJECT) BUTTON
Press it button to eject the DISC or insert the DISC to start play .
11 AUX Input JACK
For information about connecting a AUX device, please see page 25 .
12 USB PORT
For information about connecting a USB device, please see page 35.
16 RESET BUTTON
Press this button to return to factory settings .
13 REL BUTTON
Press this button to release the front panel for removal . Refer to see page 7.
15 VOL+/ VOL- KNOB
In normal mode, this knob is used to increase or decrease the volume. It is also used as an UP/DOWN knob when audio or video settings are being adjusted when accessed using the SELECT button.
10 IR sensor
B) In Radio Mode:
Press briefly the or button in order to set a radio station manually. press longer (for more than 2’s ) the or button in order to start the search for a radio station automatically.
14 MIC (microphone)
Microphone position .
Page 16
-16-
Basic Operation
Press it to switch the device ON, press and hold about 2 seconds to switch the device OFF.
POWER On/Off
Ejecting The Disc
Use your finger to touch the
range on touch screen , the control panel of the unit will swing downwards . Then
you can insert the disc or eject the disc .
Mute Function
Touch “MUTE ON” range, it will mute the sound but the disc continues playing . Touch it again to resume .
MUTE ON
Setting The Buzzer ON/OFF
Repeatedly touch range to select the item, and
theusetheVOL+/-toswitchthe
.
“SEL”
BUZZER
BUZZER ON/OFF
SEL
Setting the Background Color
SEL
In radio mode, repeatedly touch the range to select the
item, and then use
the VOL+/- to select the back-
“ SEL ”
“wallpaper”
ground color among of the
in the mode, the monitor of unit will change the background color automatically .
“wallpaper
AUTO, wallpaper: 01 ...... wallpaper: 11” ,
“AUTO”
Touch screen
Touch the screen the VOLUME- to decrease the volume level .
Touch the screen the VOLUME+ to increase the volume level .
VOLUME-
VOLUME+
Volume Adjusting
Volume button
A
Revolve : clockwise to increase /
Anticlockwise to decrease .
Setting The Clock
Touch briefly the range
to show/hide the clock .
Touch hold for more than 2’s
use
“CLK”
the hour will flash , the VOL+/- to adjust .Touch it again, the minute will flash, then use the VOL+/­to adjust .
CLK
Setting Bluetooth ON/OFF
SEL
Repeatedly touch range
to select the item, and
theusetheVOL+/-toswitchthe
.
“SEL”
Bluetooth
Bluetooth ON/OFF
Select Sources
Touch the MOD section on the screen, the signals will display in the screen as follow :
repeatedly
MODE
DISC
AUX IN
RADIO BLUETOOTH MP3
Page 17
MODE
SEL
VOLUME+VOLUME-
MUTE ON
TREBLE +02
FLAT
DISC-IN
12: 18
touch to adjust
touch to select
-17-
TFT Monitor Adjustment
During DISC playback, use your finger to touch briefly the SEL section on the screen (or press SEL button on front panel
mode
)
to access the Picture
selection menu, by repeatedly touch the SEL section, and then touch the VOL+/­(or rotate the VOL+/-) to adjust the selected mode . (The corresponding value will show on the monitor )
COLOR: 0 to 32
Adjust the color for the picture-lighter or
darker. BRIGHT:0to32
Adjust if the picture is too bright or
too dark. CONTRAST: 0 to 32
Adjust the contrast of the bright and dark
portion. TINT:0to32 Adjust the tint if the human skin color is
unnatural.
-Adjustable when NTSC is selected for NTSC/PAL .
ADJUSTABLE ITEMS:
““
““
Basic Operation
ADJUSTABLE ITEMS: Volume:
Bass:
Treble:
0to32
Adjust volume level by using VOL +/-.
-14to+14
Adjust bass level by using VOL +/-.
-14to+14
Adjust treble level by using VOL +/-.
Volume Bass Treble Balance
Contrast Bright ColorTint
FadeBuzzer
Bluetooth
SEL
MODE
SEL
VOLUME+VOLUME-
MUTE ON
BRIGHT 16
touch to adjust
touch to select
Audio Quality Adjustment
Volume Bass Treble Balance
Contrast Bright ColorTint
FadeBuzzer
Bluetooth
During DISC playback, use your finger to touch briefly the SEL section on the screen (or press SEL button on the front panel )
to access the Sound mode selection menu, by repeatedly touch the SEL section, and then touch the vol+/­(or rotate the vol+/-) to adjust the selected mode . (The corresponding value will show on the monitor )
SEL
Rear View Camera
When connecting the rear view camera. the mirror image of the rear view through the rear view camera is automatically displayed on the monitor when you change the gear to the back position. (The monitor on the unit only.)
Page 18
-18-
Basic Operation
Balance:
Fader:
R0-10toL0-10. Adjust sound balance between left and right speakers by using VOL + / -
F0 10toR0-10. Adjust sound balance between front and rear speakers by using VOL + / VOL - .
.
-
The button is to be activated for the following reasons: A. Initial installation of the unit when all wiring is completed. B. All the function buttons do not operate. C. Error symbol on the display.
RESET
Reset Factory Settings
RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object.
Touch the screen the DSP range (orpresstheEQbuttononthe remote control ) to select one of the preset sound modes .
The information will display in the monitor as follow :
(Rock/Pop/Jazz/Classic/Flat).
Setting Audio Modes
It`s depend on your habit to select the Audio mode .
DSP
GOTO
S-WOOFER
DSP
OSD
FLAT
DISC-IN
16: 18
ROCK
TA AF CLK LUD
RANDOM REPEAT INTRO
POP
FLAT
ROCK
CLASSIC
JAZZ
touch to select
RESET
RET
USA/EURO FREQUENCY SWITCH
On the right of this device, there is a USA/EURO frequency switch, you can select the desired radio frequency before installing .
USA/EURO Frequency Switch (radio frequency switch for selecting between the USA and EUROPE frequency band. )
Page 19
Radio Operation
-19-
Touch “ ” to next .
Touch “ ” to previous .
When an FM stereo broadcast is hard to receive
Touch the section on
touch screen (or press button on the remote control ) to select the MONO or STEREO mode . (When Stereo mode is activated, the ST symbol will appear . )
“STEREO/MONO”
ST/MO
Listening to the Radio
SwitchingTo Radio Mode
Touch the screen of range (or press the MOD button on the front panel ) repeatedly to
“MODE”
MODE
select the RADIO mode. the following information will appears as below:
Touch the range on the touch screen (or press LO/DX button on the remote control ) to select the LOCAL or DX mode . ( You can choose between the LOCAL and DX(DISTANCE) mode for local or long-distance traffic news . )
“ LOC/DX ”
To tune in strong-singnalFM
Station only (LO/DX function)
S-WOOFER
FM1 87.60
MHZ
APS
STEREO/MONO
FLAT
NO-DISC
12:06
DX
ST
AF
BND
REDIAL
DIAL
PAIR
DSP
MODE
SEL VOLUME+VOLUME-
MUTE ON
FM1 87.60
MHZ
123456
FLAT
NO-DISC
12:06
DX
ST
TA
AF
FM1 87.60
MHZ
FLAT
NO-DISC
12:06
DX
ST
AF
TA
PTY
CLOCK LOUDNESS
LOC
FM1 FM2 FM3
AM2(MW2)
AM1(MW1)
select the band , the message will show in turn :
Selecting The Frequency Band
Touch the screen of
section (or press the on
the front panel ) repeatedly to
“ BND ”
BND
BND
Start Searching For a Station
During Radio mode, briefly touch the screen of “ ” section or press the “ ” on front panel to increase frequency by one step of channel spacing .
Briefly touch the “ ” section or press the “ ” button on the front panel to decrease frequency by one step of channel spacing .
Manual Search
Automatic Search
During Radio mode, touch and hold (for more than 2’s ) the screen of “ / ” section or press longer the “ / ” on the front panel to start search for a radio station automatically .
Page 20
MODE
SEL VOLUME+VOLUME-
MUTE ON
FM1 87.60
MHZ
123456
FLAT
NO-DISC
12:06
DX
ST
TA
Radio Operation
-20-
Storing Stations In Memory
Setting Memory
Press the button repeatedly on the front panel to preset stations at radio mode . Or touch the screen the
/ CH 1-6 ”
1-6 sections()
With this system, a total of 30 stations can be stored in the memory of six buttons. Each band stores up to six preset stations. The stations might be FM1, FM2, FM3, AM1(MW1), and AM2(MW2) band. The operation is as below :
Touch and keep the (or press and hold the / ) for
about 2 seconds, the current listening station will be stored into the number location .
-Store in Memory 1-6 sections
CH 1-6
-Retrieve a preset station
1-6 sections
CH1-6
Touch the briefly (or press the / button repeatedly) to
retrieve a station which had been stored in the memory in advance the chose number is shown on display .
Touch to preset station
Scan Function
In Radio mode, briefly touch the
section on the touch screen ,
the radio briefly plays all the
APS
preset stations of the frequency band .
APS
automatic station storage. The radio searches within the current frequency band, e.g. FM1, for the stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set .
Automatic Memory Storing & Program Scanning
Automatic Preset Setup
In Radio Mode, Touch and keep the
APS section on the touch screen
for about 2 seconds to active
APS
RDS FUNCTION
In Radio mode, touch it to select the desired item, it will display the
following as below :
TA Traffic Announcement
(Priority ForTraffic Information)
In Radio mode, touch briefly the screen of range to activate the TA function.
“TA”
Touch it again to turn off the TA function . When the TA function is activated, the TA symbol appears in the display . During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) . If an FM station is being received which transmits the latest traffic announce­ments from time to time, the TP display lights up.
TA
AF
FM1 87.60
MHZ
FLAT
NO-DISC
12:06
DX
ST
AF
TA
PTY
CLOCK LOUDNESS
LOC
Touchto select
Page 21
AF
AF FUNCTION
(Alternative Frequencies)
AF is a function that works with the help of RDS (Radio Data System) and can only be used with FM stations . The radio searches in the background for the best frequency reception of the station that has been tuned into .
Touch the AF section on touch screen or swing and keep the SEL knob in the TA/AF direction for about 2 seconds , the AF function is activated. The AF symbol appears in the display .
When the AF function has been switched on, the radio continuously tests the signal strength of the AF frequency . The test interval for each AF frequency depends on the signal strength of the current station and varies from a few minutes in the case of weak signals. Whenever the newAF frequency is stronger than the station that is currently tuned in , the radio switched to this frequency for a short time for a short time and the message “NEW FREQUENCY “ is displayed for one or two seconds.
In Radio mode, touch briefly the screen of range to activate the AF function. Touch it again
to turn off the AF function .
“AF”
Radio Operation
-21-
When the TA function is switched on , the FM traffic automatically interrupt CD operation(the word TRAFFIC appears in the display).
The volume level is increased to the
minimum value for the transmission of traffic announcements.
After the traffic announcements has
finished, the program that was previously running is resumed.
Interruption of the TA Function: if you would like to interrupt the current traffic announcement, touch the TA section on screen briefly . This does switch off the TA mode .
the status of the AF function is shown by an AF symbol in the display.
If the AF symbol appears in the display, the AF function is switched on and RDS transmission date is being received . If the AF symbol flashes in the display, the AF function is selected but no RDS signal can be received at the moment .
Note :
PTY FUNCTION
In Radio mode, touch the screen of “PTY” range to select the Program type .
besides the stations name, some FM stations also transmit information on the type of program. This information can be displayed by your car radio .
PTY Selection of the program type
Examples of such types of program are :
SPORT NEWS POP WEATHER ......
With PTY function you can specifically select stations transmitting a particular type of program. Touch the PTY range on screen repeatedly to call up the PTY selection menu . The message “PTY SEEK” then appears briefly in the display .
When PTY has been selected the radio starts searching for corresponding PTY information and stops when the PTY information has been found, “NO PTY” appears in the display. If the PTY information being searched for no longer exists, the PTY function automatically switches to normal mode .
PTY
Page 22
DVD 1-0:00:16
FLAT
DISC-IN
12: 16
GOTO
S-WOOFER
DSP
OSD
TA AF CLK LUD
RANDOM REPEAT INTRO
MODE
SEL
VOLUME+VOLUME-
MUTE ON
DVD 1-0:00:16
FLAT
DISC-IN
12: 16
TITLE
DVD 1-0:00:16
AUDIO ZOOMSUBTITLE
FLAT
DISC-IN
12: 16
SETUP
PAIR
DIAL
REDIAL
DISC Operation
-22-
Basic Operation
During DISC playback, you can touch the screen to display the following:
MODE
SEL
VOLUME+VOLUME-
MUTE ON
DVD 1-0:00:16
FLAT
DISC-IN
12: 16
Switching the DVD mode
Touch the screen of range (or press MOD button on the front panel ) to select the DISC mode, it display like following :
“MODE”
Function setup (different the sourcethe display is different)
Touch “ ” to next .
Touch “ ” to previous .
Stopping Play
Touch the screen the range (or press the button on remote control .) To stop the unit playback. Touch the section or press button on front panel to start play.
Pause (still picture)
Touch the “ ” section on touch screen during playback will stop play temporary, touch it again to return the normal playback .
DVD 1-0:00:16
OK
FLAT
DISC-IN
12: 16
DVD/VCD/CD/MP3:
Normal Playback 2x 4x 8x 16x
Rapid Forward/Rapid Reverse
During DISC playback, touch the screen of “ / ” range or press longer (more than 2’s) the “ / ” button on the front panel , the speed of rapid forward/reverse changes according to the disc as follow:
Page 23
DVD 1-0:00:16
FLAT
DISC-IN
12: 16
GOTO
S-WOOFER
DSP
OSD
TA AF CLK LUD
RANDOM REPEAT INTRO
DISC Operation
-23-
Subwoofer Function
Use your finger touch the “ section on the screen to turn on the Subwoofer
function, touch it again to cancel function .
S-WOOFER“
S-WOOFER
Selecting The Play Modes
During the Disc playback, touch the touch screen, it will display the following as below :
Touch to select
1) Repeat Function
FOR DVD :
Touch the screen the of (or press longer button on the
remote control) to select REPEAT mode as follow :
“REPEAT”
2/RPT
range
REPEAT ALL
CHAPTER REPEAT ON TITLE REPEAT ON
1. Continuously repeat at the current chapter/track, when selected REP-ONE mode .
2. Select REP-ALL mode to continuously repeat all chapter/track on the current disc .
REPEAT OFF
REPEAT ONE REPEAT ALL
FOR VCD/CD/MP3 :
Touch the screen the of (or press longer button on the
remote control) to select REPEAT mode as follow :
“REPEAT”
2/RPT
range
2) RDM(RANDOM) Function
During DISC playback, touch screen of
section ( press the button longer on the remote control to play in random.
“RANDOM” 4/RDM
Zoom Function
Repeatedly touch the section of the ZOOM, the displaying rate can be 2x, 3x, 4x, 1/2, 1/3, 1/4 .
Use the direction keys ( / / / on remotecontrolor///ontouch screen) to move the enlarged picture . Note: During the JPEG disc playback , touch the screen of “ZOOM” range , the “zoom 100%” word will display, then you can touch longer (more than 2’s) the /
section on touch screen (or press the
/ buttons on remote control ) to zoom in/zoom out the picture. In zoomed mode, use the direction keys to move the enlarged picture .
ZOOM
Loud Function
Touch the screen of range to switch the Loudness function ON or OFF.
“LUD”
LUD
Skipping Track
During DISC playback, Touch the
/ section on the touch screen to skip to next/back one track. (You can also press the / on the front panel to skip to next /back one track.)
Note :
1. In DVD mode, touch the section continually twice to back one track . (Press the button continually twice to back one track .)
2. For some VCD2.0 disc (PBC-playback control), above these buttons may be unavailable .
Page 24
DVD 1-0:00:16
FLAT
DISC-IN
12: 16
GOTO
S-WOOFER
DSP
OSD
TA AF CLK LUD
RANDOM REPEAT INTRO
-24-
DISC Operation
NOTE : For MP3, the 3/INT button is not
available.
FOR CD :
Touch the screen of the section (or longer press the button on the
remote control ) to play the previous 6 seconds part of each track/chapter on disc. (Touch it again to cancel this mode)
“INTRO”
3/INT
3) INT Function
FOR VCD :
Touch the screen of the section (or long press the button on the
the remote control ). It display will following menu as below : (touch it again to cancel this mode .)
“INTRO”
3/INTer
SELECT DIGESTTYPE: TRACK DIGEST DISC INTERVAL TRACK INTERVAL
Use the UP, DOWN, LEFT and RIGHT arrows on the remote to select the item, and then press ENTER to confirm .
FOR DVD :
Touch the screen of the section (or long press the button on the
the remote control ). It display will following menu as below : (touch it again to cancel this mode .)
“INTRO”
3/INTer
Use the UP, DOWN, LEFT and RIGHT arrows on the remote to select the item, and then press ENTER to confirm .
SELECT DIGESTTYPE: TITLE DIGEST CHAPTER DIGEST TITLE INTERVAL CHAPTER INTERVAL
Each playing, the order is different . (Depend on the disc used for VCD). Touch it again to cancel this function . Note : in random mode, the button is not available .
DISC Search (GOTO)
Touch to select
FOR DVD :
Touch the screen the of range (or press on the remote
control ) Twice, the screen will display the following message :
“GOTO”
GOTOthe button
Title 01/01 Time -:--:--
0:10:36
You can select the item you want to watch through TIME setting by using numberic buttons . (E.x. 0:10:36)
FOR VCD (With PBC OFF):
Touch the screen the of range (or press GOTO on the remote control )Once, the screen will display the
following message :
“GOTO”
the button
Disc Go To --:--
00:36
Use the numberic buttons to input the time directly (E.x. : 00:36)
GOTO MUTE ON
012345
FLAT
DISC-IN
12:16
DVD 1-0:00:16
6 7 8 9 +10
Page 25
-25-
DISC Operation
AUX Operation
o connect analogue replay devices. Use this jack to replay sound of other replay equipment such as DVD players, computers, etc. Via the loudspeakers.
On the front panel of this unit, there is an AUX IN jack, follow the diagram below t
3) You now hear the sound from the external device played back through the loudspeakers .
4) Touch the volume+/- sections on touch screen or use the VOL+/- on the remote to adjust the volume level.
Touch and hold the / section on the touch screen , you can select the title or chapter of DVD . (Only for the DVD with title /chapter.)
Note:
AUX IN JACK FRONT PANEL
MOD
VIDEO IN (yellow)
RCHIN(red)
LCH IN (white)
1) Please connect the external device with stereo jack plug the Aux in socket .
2) Touch the MOD section on screen or press the MOD button to select the AUX IN connection. It will display the following as below :
AF
TA
LUD
CLK
S-WOOFER
AUX IN
FLAT
DISC-IN
12: 16
DSP
VOLUME+
AUX IN
VOLUME-
FLAT
DISC-IN
12: 16
MODE
MUTE ON
SEL
REDIAL
DIAL
PAIR
Page 26
-26-
NOTE:
For CD and MP3,the message will always display on the screen.
SINGLE ELAPSED SINGLE REMAIN
3.Example for MP3: Each time is pressed or touch , the message displayed on screen changes as follows:
OSD
E.Touch or Press for the fifth time: The message on the screen will be cleared for SVCD and VCD.
OSD
SINGLE ELAPSED
TRACK 01/16 0:00:56
SINGLE REMAIN
TRACK 01/16 0:05:10
TOTAL ELAPSED
TRACK 01/16 0:31:36
TOTAL REMAIN
TRACK 01/16 0:36:26
2.Example for VCD/SVCD/CD: A.Touch or Press for first time:OSD
B.Touch or Press for second time:OSD
C.Touch or Press for hird time:OSD
D.Touch or Press for fourth time:OSD
DISC Operation
E. Touch or Press for fifth time: The message on the screen will be cleared.
OSD
TITLE ELAPSED
T 01/01 C 01/38 0:02:06
TITLE REMAIN
T 01/01 C 01/38 3:24:36
CHAPTER ELAPSED
T 01/01 C 01/38 0:02:56
CHAPTER REMAIN
T 01/01 C 01/38 0:04:32
ON-SCREEN DISPLAY FUNCTION
During playback, touch the screen the OSD section (or press the OSD on the remote), it will display the following as below :
1. DVD: A.Touch or Press for first time:OSD
Title Number, Total Title Number, Chapter Number, Total Chapter Number of this Title of the disc currently being played will be shown on the screen, along with the elapsed time.
B.Touch or Press for second time:OSD
C.Touch or Press for hird time:OSD
D.Touch or Press for fourth time:OSD
OSD
Page 27
TITLE
DVD 1-0:00:16
AUDIO ZOOMSUBTITLE
FLAT
DISC-IN
12: 16
SETUP
PAIR
DIAL
REDIAL
MONO LEFT MONO RIGHT
STEREO
MIX-MONO
For VCD/CD:
AUDIO
AUDIO
during playback, touch the section of the touch screen or Press
on the remote . It is possible to switch the sound between monaural and stereo sound.
-27-
DISC Special Functions
DVD/VCD Special Function
During DVD playback. Touch the section on touch screen(or press the SUBTITLE on the remote) .
SUBTITLE
1. Multi-subtitle Language Function (for DVD Only)
Notes:
- The language number is different according to the disc.
- Some discs only contain one subtitle language.
- When no different subtitle language are recorded, will be displayed at screen left top corner.
Each time the button is pressed or touch, number of the subtitle language changes in sequential order.
SUBTITLE
2. Multi-Audio Language Function
For DVD:
During DVD playback , touch the section on touch screen (or press the AUDIO
AUDIO
on the remote .) Each time the button is pressed or touch , number of the audio soundtrack language changes on sequential order.
Notes:
- The language number is different according to the disc.
- Some disc only contain one language soundtrack
- When no different language soundtrack are recorded will be display at screen left top corner.
AUDIO
Touch toselect
During DVD playback, touch the
section or PressANGLE button on the remote . Each time the button is pressed or touch,number
3. Multi-Angle Function (for DVD Only)
of the angle changes in sequential order.
Notes:
- The angle number is different
according to the disc.
- The function only work for disc having
scenes recorded at different angles.
- When no different angle are recorded,
will be displayed at screen left top
corner.
For DVD:
If the DVD has multiple titles recorded on the disc. It can select preferred title from the
4. Title Menu Function
title menu to start playback.
- During DVD playback, touch the
section or press TITLE button on the remote .The title menu is display.
- Touch the cursor button shown in TV
screen, select preferred title by the cursor button and confirmed by touch ENT button .
Press button on the remote control while the disc is playing, you can switch between "PBC on"and "PBC off" mode.
TITLE
TITLE/PBC
For VCD:
TITLE
Page 28
Setup
-28-
USING THE MENU
TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memory
DOLBY
....GENERAL SETUP PAGE....
Set TV Display Mode
TV Display
Normal/PS Normal/LB Wide
Normal/LB
GENERAL SETUP
1.TV DISPLAY SETUP
This is to select the appropriate TV aspect (4:3 or 16:9) according to the connected TV set.
Played back in the PAN & SCAN style. (If connected to wide-screen TV, the left and right edges are cut off.)
Played back in LETTER BOX style. (If connected to wide-screen TV, black bands appear at top and bottom of the screen.)
Select when a wide-screen TV set is connected.
Normal/PS (For 4:3 TV)
Normal/LB (For 4:3 TV)
Wide (For 16:9 TV)
16:9
4:3LetterBox
4:3 Pan Scan
TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memory
LB ON ENG SPDIF/RAW ON ON ON
DOLBY
....GENERAL SETUP PAGE....
Go To General Setup Page
Overview Of The Main Menu
DOLBY
()1 ()2 ()3 ()4
(1) General Settings (2) Speaker Settings (3) DOLBY Digital Settings (4) PreferenceSettings
TV Setting
OK
Enter
Up
Down Left
Right
Previous
Touch to select
The FollowingButtons For Entering
The Selection .
The buttons of the left and right are for selection of setting type . The buttons of the up and down are for selection of the setting program .
1. Touch the screen of range or press the button on remote .
2.The SETUP menu is displayed.
3.Select the preferred item by touch the ///range on the screen
or by using the / / / buttons .
4.Touch screen of the range or
Press on the remote to confirm .
“ SETUP ”
SETUP
“OK”
ENTER
Page 29
-29-
Setup
5.CAPTIONS SETUP
Activate the CAPTIONS feature by
selecting ON. And release this feat­ure by selecting OFF.
2.ANGLE MARK DISPLAY SETUP
If it is set to ON, when the multi-angle DVD disc is playing, (the angle mark) will appears on the screen; if is set to OFF, the mark will not appear.
4.SPDIF OUTPUT
This is to activate the audio output from SPDIF OFF mode to SPDIF/RAW mode to SPDIF/PCM mode.
TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memory
DOLBY
....GENERAL SETUP PAGE....
Set Angle Mark
ON OFF
ON
Angle Mark
OSD Lang
TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memory
DOLBY
....GENERAL SETUP PAGE....
Set OSD language
English French German Spanish Italian Portuguese
OSD Lang
English
OSD Lang
TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memory
DOLBY
....GENERAL SETUP PAGE....
Setup SPDIF
SPDIF OFF SPDIF/RAW SPDIF/PCM
Spdif Output
SPDIF/OFF
TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memory
DOLBY
....GENERAL SETUP PAGE....
Closed Caption
ON OFF
ON
Captions
GENERAL SETUP
LANGUAGE DISPLAYING
3.OSD LANG TYPE SETUP
Touch the / section on the touch screen or press the / button on the remote to select the preferred OSD
language , then touch the section to confirm .
OK
Page 30
Setup
6.SCREENSAVER SETUP
If the screen displays a static image for too long, some "burn-in" may occur, leaving a permanent trace of the image behind. To avoid this, turn ON the SCREENSAVER item. After a short period of inactivity on the monitor, the unit will substitute a moving image to avoid burn-in.
7.LAST MEMORY SETUP
Select the LAST MEMORY output ON/OFF.
SPEAKER SETUP
DOLBY DOWNMIX
Many DVD discs are recorded using a surround sound recording technology called Dolby AC3 5.1. When such a disc is played in a normal 2- or 4-channel playback unit like this one, the surround sound must be "downmixed" to stereo. In this case, choose "stereo," unless the output from this unit is connected to a mobile Dolby surround sound system. In that case, choose LT/RT.
DOLBY DIGITAL SETUP
DYNAMIC RANGE CONTROL
Select DRC and adjust the dynamic range of a Dolby Digital encoded program. There are 8 steps between full compression and off compression.
GENERAL SETUP
TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memory
DOLBY
....GENERAL SETUP PAGE....
Screen Saver
Screen Saver
ON OFF
ON
TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memory
DOLBY
....GENERAL SETUP PAGE....
Set Last Memory State
ON OFF
ON
Last Memory
DOWNMIX
DOLBY
....Speaker Setup Page....
Set Downmix Mode
LT/RT STEREO
DOWNMIX
STEREO
....DOLBY Digital Setup....
Set DRC OFF
DOWNMIXDYNAMIC
DOLBY
FULL
6/8
4/8
OFF
2/8
.....Speaker Setup Page.....
-30-
Page 31
Setup
OSD Lang
Preferred Audio Language
English French German Spanish Italian Portuguese
English
TV Type Audio Subtitle Disc Menu Parental Password Default
DOLBY
....Preference Page....
Audio
--- PREFERENCES PAGE ---
1. TV TYPE SETUP
This player is capable of playing discs recorded in either PAL or NTSC formats. Make the selection based on whether you are connecting the unit to a PAL TV or an NTSC TV. You can also set the unit to AUTO (autoselect). The disadvantage to autoselect is that each time you turn the unit on it checks to see what kind of monitor is connected, which causes a small delay and some flickering of the display image which you may find unpleasant.
2.AUDIO LANGUAGE SETUP
Select the preferred AUDIO soundtrack language using the cursor buttons.
3.SUBTITLE LANGUAGE SETUP
Select the preferred SUBTITLE language by using the cursor buttons.
4.DISC MENU LANGUAGE SETUP
Select the preferred DISC MENU language by using the cursor buttons.
OSD Lang
TV Type Audio Subtitle Disc Menu Parental Password Default
DOLBY
....Preference Page....
Set TV Standard
PAL AUTO NTSC
NTSC
TV Type
OSD Lang
Preferred Subtitle Language
English French German Spanish Italian Portuguese Off
TV Type Audio Subtitle Disc Menu Parental Password Default
DOLBY
....Preference Page....
Subtitle
Off
OSD Lang
Preferred Menu Language
English French German Spanish Italian Portuguese
TV Type Audio Subtitle Disc Menu Parental Password Default
DOLBY
....Preference Page....
Disc Menu
English
-31-
Page 32
Setup
5.PARENTAL
Select suitable parental guidance with the cursor buttons and confirm it by pressing the ENTER button.
6.PASSWORD SELECTION
Thepasswordmustbeusedtomake changes to the Parental Control menu above. The factory default password is
. To change this password, press change. You will be asked for the current password. Once you have entered it, you have the opportunity to change it. Then, when you enter the Parental Control menu, you will be required to use this new password in order to make any changes.
1379
7.DEFAULTS
Selecting the DEFAULT item and confirming RESET will return ALL personal settings you have made, including radio and TV presets, to the factory default settings.
DEFAULTS TABLE
GENERAL SETUP
SPEAKER SETUP
DOLBY DIGITAL
PREFERENCES
TV DISPLAY
ANGLE MARK
SPDIF OUPUT
OSD LANGUAGE
CAPTIONS
LAST MEMORY
DOWNMIX
DYNAMIC
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
NORMAL/LB
ON
ON
ENGLISH
ON
STEREO
AUTO
ENGLISH
OFF
ENGLISH
8 ADULT
1379
ON
OFF
SCR SAVER
SPDIF/RAM
OSD Lang
TV Type Audio Subtitle Disc Menu Parental Password Default
DOLBY
....Preference Page....
Set Parental Control
4PG13 5PGR 6R 7NC 17 8ADULT OFF
8ADULT
Parental
--- PREFERENCES PAGE ---
OSD Lang
Changed Password
CHANGE
TV Type Audio Subtitle Disc Menu Parental Password Default
DOLBY
....Preference Page....
CHANGE
Password
OSD Lang
Load Factory Setting
RESET
TV Type Audio Subtitle Disc Menu Parental Password Default
DOLBY
....Preference Page....
RESET
Default
Age control
-32-
Page 33
TITLE
DVD 1-0:00:16
AUDIO ZOOMSUBTITLE
FLAT
DISC-IN
12: 16
SETUP
PAIR
DIAL
REDIAL
Bluetooth Operation
User Guide For Bluetooth Operation
-33-
1). Place the Radio and mobile handset in 3 meters apart.
3). Set your bluetooth phone to
“discover” the Radio .
Following your phone’s instruction guide for details, active your mobile handset’s Bluetooth function, the handset will search for accessible Bluetooth devices.
4). Your phone will findthis Radio.
Select this Radio from the list.
5). “8888”
“PAIR OK”
Enter passkey , then press “ ” to pair the Radio and the handset, the word , will display in the TFT .
OK
1). If the pairing can not be completed within approximately 2 minutes , whiles the pairing mode is activated, and you will need to reattempt pairing (See steps 2-5 above) .
2). After pairing is completed, if the
ICON is stilling flash on the TFT , please follow the steps to reattempt pairing through your handset until the
ICON remains solid on the screen.
Important:
2. Using The BluetoothRadio.
Once connecting is complete, you may access the following function. Some of the below mentioned functions only accessible for handset supported with hands-free profile.
6). “CONNECT”Select the from the list on the phone, if you connect success­fully , the ICON remains solid on the screen , then you can operate the function of blue-tooth about the unite .
1.“Pair”To Your Bluetooth Phone
Prior to using the Bluetooth function for the fist time, you must pair it with a Bluetooth-enabled mobile handset. The following steps describes pairing the instruction for a typical Bluetooth­enabled mobile handset.
Touch the touch screen , the touch operation menu will display. Touch the “ ” section to select , it will display following as below :
Touch toselect
2). Put the Radio in pairing mode.
“PAIR/
“BLUETOOTH
PAIRING ”
a Press the power button to turn ON,
the ICON will flash on the TFT .
b. Touch the screen of “ ” range
or press the on the remote control until the word
display, it’s now ready
for pairing.
.
PAIR
” and “ ” serves as the “ ” and “ ” button on your mobile handset .
Please note :
When you dial the wrong number, you can touch the screen to delete the wrong number . (You can also
press the “ ” button on the remote controltodoso.)
Note:
“ CLEAR ”
Touch the screen of “ ” range, (or press briefly the button on the remote control ) the word
will display on the TFT . then you can touch the number section on screen (or dial the number buttons on the remote control ), and then touch the “ ” section or press button to confirm .
“ PAIR/
“DIAL NUMBERS”
“ PAIR/
Makeacall
DIAL
DIAL
Page 34
During conversation in progress, tune the Volume switch until you reach the desired volume level.
Adjust the Volume
1) When user use our Bluetooth Head unit, please make sure the mobile phone you use must/does support Bluetooth functions (Headset or Headsfree profiles or both) .
2) Before you start to use this function, please make sure complete pairing with your mobile phone first. Please refer to the user manual , section “PAIRING” for detail “PAIRING” instruction .
3) If you want not to use the function of the Blue-tooth about the unit , you can select the Bluetooth OFF . (Refer to see the page 16.)
Note:
-34-
Bluetooth Operation
Note:
please make sure it support the Bluetooth profile.A2DP & AVRCP
Touch the screen of “ ” section , the message will display as below :
DIAL
CLEAR
678 90
DIAL NUMBERS
123 45
DIAL
SEL VOLUME+VOLUME-
REJECT
PICKUP MUTE ON
CALL CONNECTED
touch to dial
Answer a call
After you hear the ring tone,
the incoming telephone number will display on the TFT LCD . Touch the screen of “ ” range to
listen or press the button on the remote control .
“PAIR/
PICKUP
“PAIR/ ”
During talking mode , user can touch the screen of the “ ” range (or
press the button on the remote control ) to transfer the audio from the unit back to the mobile phone for privacy reason .
CallTransfer
PICKUP
In Bluetooth menu, touch the screen of “ ” range (or press briefly
button on remote control ) ,
the message display the
.
“REDIAL/
“CALL HOOKED/CALL EJECTED”
End/Reject a call
REJECT
In Bluetooth menu, touch the “ ” (or press longer button on the remote control the
will
display on the TFT LCD.
“ REDIAL/
“DIAL LAST CALL/DIAL OUT NOW ”
Redial last number
REDIAL
In Bluetooth menu, touch the screen of
range to select the , you can play the BT MUSIC from your mobile handset.
“MODE” “BT MUSIC”
Play BT music
MODE
SEL VOLUME+VOLUME-
MUTE ON
BLUETOOTH MP3
FLAT
DISC-IN
08: 16
S-WOOFER
touch to select
Page 35
Other Main Operation
-35-
Important Note:
To prevent damage to the USB device, do not remove or disconnect it during playback. it is also a good practice to remove the USB drive during disc playback.
In USB Playback mode
REPEAT
REPEAT
Use the UP, DOWN, RIGHT or LEFT buttons to navigate to and select files to play, and press ENTER to begin playback (or viewing, in the case of JPEG files). To skip to the next or last track, touch or press the or . Press the or buttons for Fast Forward or Fast Reverse playback.
play modes are also available by repeatedly pushing until the desired mode is found.
USB Operation
Following the diagram below, connect your USB device to the front panel USB port . If it is properly connected, the device will be mounted and start playing automatically.
you can also select the desired item of the USB device The buttons on the remote control, on the device, have the same functions as the touch buttons of this touch screen have .
.
Changing From DISC to USB Playback Modes
If the disc present in the player is an MP3 disc, touch section on screen or press the STOP on remote once then touchorpresstheGOTOtoUSB playback.
If the disc present in the player is an DVD or VCD or CD disc, touch on the screen or press STOP twice on the remote then touch GOTO section on the screen or press the GOTO button on the remote to USB playback.
Changing From USB to DISC Playback
Modes
If you are in USB Playback mode and wish to begin playback of a disc already in the player, touch the range on the touch screen or press the STOP on the remote once. Then touch GOTO range on the screen or press the GOTO on the remote and the player will switch to DVD/VCD/CD/MP3 Playback mode.
Page 36
Other Main Operation
Inserting and removing a SD or MMC card on thefront panel of unit .
SD/MMC card OPERATION
Mode change to SD/MMC card
After a SD or MMC card was inserted into the main unit card slot . The unit will starts playing the files contained on the memory card . Once the unit read the memory card successfully, the first file on the memory card will automatically start play back. Press the mode button repeatedly is allowing changing to other modes .
The unit can support playback MP3/WMA/JPEG/MP4 format which are stored into SD and MMC memory card . Please read below before you start the operation of memory card .
File Playback Operation
All the SD or MMC memory car playback operation function is same as the operation on . Please to operation for more details .
CD/MP3/WMA
“ MP3/WMA”
Change DISC to SD/MMC card
The operations are same as USB mode, refer to see USB operation .
Change SD/MMC card to DISC
The operations are same as USB mode, refer to see USB operation .
-36-
Press in till heard a .“CLICK”
Removing the SD or MMC card .
Remove the memory card .
Inserting the SD or MMC card .
Insert the memory card into slot with label side facing backward .
Press in till heard a .“CLICK”
Label side facing backward
Page 37
Other Main Operation
1 Current track(file)(highlighted bar) 2
Elapsed playing time of the current track(
4 Total playing time.
5 Operation mode icon. (Play),
(stop), (pause), (forward)
(reverse).
6
Current track (file) number/total number of tracks(files) in the current folder.
3
not available for JPEG disc)
( not available for
JPEG disc)
Selected playback mode
Touch the screen, it will display the following as below : (when the parking brake is applied .)
MP3/WMA/JPEG/MPEG4 DISC PLAY
When you insert a disc which contains MP3, WMA or JPEG files, the different file types are detected, and a list of the files are produced, as shown in the diagram below.
-37-
In stop mode, touch the / / / sections on touch screen (or Use / / / on the remote control ) to select the item or folder, then touch the range (or press button on the remote control ) to confirm.
“OK”
ENTER
Touch the screen of range or press longer on the remote control repeatedly can select two kinds of repeat play mode.
Play the same song over and over again.
Play all songs on the disc, then repeats the entire disc over and over again .
“REPEAT ” “2/RPT”
REP-ONE:
REP ALL:
MODE
SEL VOLUME+VOLUME-
MUTE ON
MP3 02-0:36:20
FLAT
DISC-IN
08: 16
Touch repeatedly
OK
FLAT
DISC-IN
12: 16
MP3 02-0:36:20
00:56 04:07
003/112
Repeat one
Mp3
Mp3
Mp3
..............
K
P
woman
1
new
ton
1
2
3
4
56
MP3
1. Touch the or section to skip a track ahead or back.
2. Press the or button to skip a track ahead or back.
Moving To Another Track :
1. Touch longer (more than 2’s ) the “ / ” range for fast forward or fast backward .
2. Press longer the or button for forward or backward .
Fast Forward/Fast Backward
Page 38
Specification
-38-
TFT Monitor:
Monitor Screen Size: 6.2 Inch Wide Number of Pixels: 480 X RGB X 234 pixels Color System: NTSC/PAL
NOTE:
Specifications and design are subject to modification, without notice, due to improvements in technology.
RADIO Section:
For 3 Bands For 2 Bands For 2 Bands
(Europe) (Europe) (U.S.A.)
FM FM FM Frequency Coverage: 87.5 to108 MHz 87.5 to108 MHz 87.5 to107.9 MHz IF: 10.7 MHz 10.7 MHz 10.7 MHz Sensitivity (S/N = 30 dB): 15 dBu 15 dBu 15dBu
MW MW AM Frequency Coverage: 522 to1620 KHz 522 to1620 KHz 530 to1710 KHz IF: 450 KHz 450 KHz 450 KHz Sensitivity (S/N = 20 dB): 40 dBu 40 dBu 40 dBu
Audio Signal Output: 2ch&4ch line out Characteristics: (1)Frequency Response 20 Hz - 20 KHz
(2)S/N Ratio 90 dB (JIS) (3)Wow and Flutter Below measurable limits
Generall :
Supply Voltage: 12V DC (11V-15V) Current Consumption: Less than10 A Signal System: Compositive video 1.0Vp-p 75 Discs Played: (1)DVD-VIDEO Disc
5"(12 cm) single-sided, single-layer
5"(12 cm) single-sided, double-layer
(2)Compact Disc (CD-DA, VIDEO CD)
5"(12cm) disc
BLUETOOTH:
Bluetooth specification: V1.2 Class 2 Bluetooth profile supported: Headset, Handsfree and A2DP & AVRCP profiles Range of frequency: 2.4GHz Spectrum
Page 39
888-J7002-04S
Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer.
Trouble Shooting
-39-
Inserting the disc in reverse direction
Press the RESET button. Front panel is not properly fixed into its place
The car ignition switch is not on
If the power supply is properly connected to the car accessory terminal,switch the ignition key to
"ACC"
The fuse is blown
Replace the fuse
Presence of disc inside the player.
Remove the disc in the player, then put a new one
Insert the compact disc with the label facing upward
The disc is extremely dirty or defective
Clean the disc or try to play a new one
Temperature inside the car is too high
Cool off or until the ambient temperature return to normal
The built-in microcomputer is not operating properly due to noise The antenna cable is not connected
Insert the antenna cable firmly
The signals are too weak
Select a station manually
SYMPTOM CAUSE SOLUTION
Television/video imageappears black-white
The color system is set incorrectly
Please switch to correct color system from menu
No television/video image appears
The unit is not connected to the parking brake detection switch
Make proper connection according to wire connection
“”
The parking brake is not engaged
For safety reasons no television /video images are displayed while the vehicle is moving. Engaging the parking brake will cause images to be displayed.
The operation keys do not work
The radio does not work
Disc can not be loaded or ejected
No power
No color in picture
Thediscformatisnot accordingto the TV-set used (PAL/NTSC)
Please the television mode of the choice accommodation
JPEG disc can not be played back
No JPEG files are recorded on the disc.
JPEG files are not recorded in a compliant formant
Change the disc Record JPEG files using a compliant application
Change the disc
Loading...