Boss BV8725B User Manual

Download

Page 1

-1-

Precautions ...................................

Safety Information.........................

Disc Notes ....................................

Installation ....................................

Detaching the front panel ...............

Attaching the front panel ................

How to clean the connectors ..........

Angle panel adjustment .................

Electric Connection ......................

Remote Control ...........................

Basic Operations ..........................

TFT Monitor Adjustment .............

Rear View Camera .......................

Audio Quality Adjustments ............

Selecting Preset Sound Modes .....

Setting The Time .........................

Reset Factory Settings ................

Control Panel ................................

Unit keys ....................................

Radio Operations ..........................

Listening to the radio ...................

Storing stations in memory ...........

Listening to a preset station ..........

RDS Function .............................

DISC Operations ...........................

Basic Operations .........................

Select Playback Mode .................

On-Screen Disc Operations ..........

DISC Special Functions ................

Selecting audio languages ............

Selecting Subtitles ......................

Selecting multi-angle views ..........

Title menu function .......................

Setup .............................................

System Setup...............................

Languages Setup.........................

Audio Setup .................................

Video Setup .................................

Digital Setup ................................

AUX Operations .............................

Bluetooth Operations ....................

USB Operations .............................

SD Card Operations .......................

MP3/WMA/JPEG/MPEG4 Play .........

Specifications ...............................

Trouble Shooting ..........................

Contents

BV8725B

In-Dash AM/FM-RDS/Bluetooth DVD/MP3/CD Receiver With

4.3 Widescreen Touchscreen TFT Monitor With Front Panel USB Port and SD/MMC Card Slot

Page 2

-2-

Precautions

THANK YOU FOR PURCHASING THIS CAR DVD PLAYER .

Before operating the unit, read this manual thoroughly and keep it handy for future reference. To avoid injury or accident, read the following precautions before installing and operating the unit.

ABOUT THE LIQUID CRYSTAL DISPLAY (LCD) PANEL

Do not press on the LCD panel on the unit as doing so can distort the picture or cause a malfunction. The picture may become unclear, or the LCD panel may be damaged.

NOTES ON CLEANING

-Clean the LCD panel with a slightly damp soft cloth.

-Do not use solvents such as benzine, thinner, commercially available cleaners or antistatic spray.

-Do not use alcohol to clean the screen.

If your car was parked in a cold or hot place, the picture may not be clear. The monitor is not damaged. The picture will become clearer the temper ature in your car becomes normal.

DO NOT install any receiver in locations where;

- it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.

- it may obstruct the operation of safety devices such as air bags, as this may result in a fatal accident.

- it may obstruct visibility. DO NOT operate any receiver while manipulating the steering wheel, as this may result in a traffic accident. The driver must not watch the monitor while driving. IF THE DRIVER watches the monitor while driving, it may lead to carelessness and cause an accident. IF YOU NEED to operate the receiver while driving, be sure to look ahead carefully or you may be involved in a traffic accident. IF THE PARKING BRAKE is not engaged.“ParkingBrake” flashes on the monitor, and no playback picture will be shown.

- This warning appears only when the parking brake wire is connected to the parking brake system built in the car. (refer to the electric connection)

ON INSTALLATION

Page 3

-3-

Safety Information

CAUTION:

THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD PLAYER CORRECTLY AS INSTRUCTED.

USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.

THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macro vision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

REGION MANAGEMENT INFORMATION:

This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD Player, this DVD Player cannot play this disc.

Page 4

-4-

Disc Notes

Preparing New Discs with Rough Spots

A new disc ma y ha ve r ough edg es o n its ins ide and outs ide edge s. I f a disc with r ough edges i s us ed, the prop er setting wil l no t be per form ed a nd t he player will not play the disc. Therefo re, remove the r o u gh edg e s in ad v a nce by using a ball point pen or pencil as shown on the right. To r e m ove th e rough edges, press the s i d e o f t h e pen or pencil against the inside and outside edges of the disc.

Rough spots on outside edge

Ball point pen or pencil

Rough spots on inside edge

Do not touch the underside of the disc

Do not bend

Wipe the disc from center toward the outside edge

Label side up

Disc Cleaning

Use a dry soft cloth to wipe the surface. If the disc is quite dirty, use a soft cloth slightly moistured with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.

Handling and Cleaning

Dirt, dust, scratches and warping disc will cause misoperation. Do not place stickers or make scratches on discs. Do not warp discs. A disc should always be kept in its case when not in use to prevent from damaging. Do not place discs in the following places:

1. Direct sunlight

2. Dirty, dusty and damp areas

3. Near car heaters

4. On the seats or dashboard

Discs which cannot be played with this player

DVD-RAM CDV CDG

Note:

A disc may become somewhat scratched (although not enough to make it

unusable) depending on your handle it and conditions in the usage environment.

Note these scratches are not an indication of any problem with the player.

Disc formats supported by this player

DVD

VCD

MP3

Audio and Video Disc size 12 cm

Audio Disc size 12 cm

DVD

VCD

MP3

Page 5

NOTES: Choose the mounting location where the unit will not interfere with the normal driving function of the driver.

Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly.

Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.

Install the unit where it does not get in the driver s way and cannot injure the passenger if there is a sudden stop, like an emergency stop.

If installation angle exceeds 30 from horizontal, the unit might not give its optimum performance.

Avoid installing the unit where it would be subject to harmful elements such as high temperature, direct sunlight, dust, dirt or excessive vibration.

DIN FRONT/REAR-MOUNT This unit can be properly installed either from "Front"(conventional DIN Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For details, refer to the following illustrated installation methods.

hot air (even if from the heater),

Installation

-5-

USA/EURO FREQUENCY SWITCH

On the right of this device, there is a USA/EURO frequency switch, you can select the desired radio frequency before installing.

USA/EURO Frequency Switch (radio frequency switch for selecting between the USA and EUROPE frequency band. )

Page 6

Installation

-6-

If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, first remove the PLASTIC COVER of the both sides away, then insert the two KEY PLATE into left and right side of chassis as above illustration.

DASH BOARD

METAL MOUNTING STRAP

HEX NUT

SPRING WASHER

PLAIN WASHER

TAPPING SCREW

CONSOLE

SLIDE BRACKET HOUSING

HEX BOLT

KEY PLATE

PLASTIC COVER

Page 7

-7-

Installation

How To Remove And Install The Front Panel

When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder.

Detaching The Front Panel

Before detaching the control panel, be sure to turn off the power.

RELEASE BUT TON

1). Press the button and the right hand side of the front panel will release.

PROTECTIVE CASE

2). Pull-off the front panel and keep the front panel into the case.

Attaching The Front Panel

1). First insert the left hand side of the front panel into the hollow of the unit. (NOTE : the “bulge” point on the panel must be attached into the hollow of unit.)

Hollow

Bulge

How to clean the connectors

Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a soft, dry cloth only, being careful not to damage the connectors.

Connector

2). Gently push the right hand side of the front panel until you feel a “Click”.

Page 8

Panel Angle Adjustment

-8-

Caution:

Do not insert your finger behind the control panel.

When you want to change the viewing angle of the operating unit to play, you can press the (angle)button repeatedly to select the desired angle as follows:

CHANGING THE CONTROL PANEL ANGLE

Angle 3

Angle 4

Angle 1 Angle 2

Page 9

Electric Connection

WIRING CONNECTION

-9-

Note :

The "PARKING BRAKE" wire must be connected to the parking brake system of your car. When the parking brake is engaged, the LCD screen will be allowed to view your video. If not, the screen will produce an image saying, "PARKING BRAKE" this is a safety feature designed for the driver not to watch a video while driving. The video output on this unit is not affected by this.

FRONT RC A WHITE L

FRONT RC A RED R

VIDEO OUT YELLOW

FRONT RC A OUTPUT CABLE

GREY

GREY/BLACK

FRONT

Rch SPK.

VIOLET

VIOLET/BLACK

WHITE

WHITE/BLA CK

GREEN

GREEN/BLA CK

REAR

Lch SPK.

AU TO AN TEN NA

& AM P TUR N ON

BLUE

FUSE

GROUND(B- )

CONSTAN T

12 VOLTS

IGNITION SWITCH(B+ )

RADIO ANTENNA JACK

RED

YELLOW

BLACK

MAIN UNIT

REAR

Rch SPK.

FRONT

Lch SPK.

CHOKE BOX

GREY SUB WOO FER

VIDEO IN YELLOW

WHITE

(B+)12V REAR CAMERA SW ITC H

GREEN

YELLOW

RCA C ABLE

REAR CAMERA IN PUT

(B-)PAR KIN G BRAKE

RCH RED

LCH WHITE

REAR RCA OUTPUT CABLE

ISO C ONNEC TOR

FUSE

Page 10

Remote Control

-10-

Button

Ref #

Function

Redial/

CLOCK

Press it briefly to view the clock time. Press again to return to normal display mode.

PAIR/

Press it to use the Bluetooth function, refer to the page 33.

STOP

Press once to pause playback. Press PLAY/PAUSE to resume playback. Please note: if you press STOP twice, playback will start at the beginning of the disc.

SETUP

Press this button to open the SETUP menu.

MO/ST (AUDIO)

In Radio mode, press this button to change between Mono and Stereo reception modes (when a station is weak, sometimes switching to Mono will improve sound quality). In Disc Playback mode, pressing this button opens the AUDIO setup menu for making changes to the way the soundtrack is reproduced.

SUBTITLE LOCAL/ DISTANT

In DVD Disc Playback mode, pressing this button will allow you to change the subtitle language on discs which have this as an option. In Radio mode, press this button to change the radio reception sensitivity in stations are near or far.

Press this button to use the Bluetooth function, refer to page 33.

Page 11

Remote Control

-11-

Button

Ref #

Function

GOTO

Press button to begin playback at a moment in the program you designate. Use number buttons to enter the data that is needed. In Bluetooth menu, it serves as the asterisk button on your mobile handset.

Press these buttons to skip ahead or back one track.

SEL

Press this button repeatedly to cycle through the various audio and video adjustments you can make: Volume, Bass, Treble, Balance, Fader, Color, Brightness, Contrast and Tint.

VOL+/-

Use these controls to adjust the volume level.

Press to navigate the various menus present in the product.

/ / /

Press this button briefly to display the root level directory of a DVD disc. Press and hold this button to turn on or off the SUBWOOFER output.

Menu SubWoofer

BAND (OSD)

In Radio mode, press this button repeatedly to switch between the five radio bands: FM1 > FM2 > FM3 > AM1 > AM2. In Disc Playback modes, Press this button to see information about the disc currently in play.

/MOD

Press this button to turn the unit ON, press and hold to turn the unit OFF. Press it briefly to select the Disc, Radio, AUX In, BT Music mode.

PLAY/ PAUSE

In Disc Playback mode, press to pause playback. Press again to start where playback stopped.

MUTE

Press this button to turn off the audio. Press again to restore the sound to its prior volume level.

TITLE/ PBC (AS/PS)

When playing a DVD, pressing this button will open the TITLE menu which is recorded on the DVD. When playing a VCD disc, press this button to create a PBC (Playback Control) menu for the disc to assist in making playback selections. In Radio mode, press and hold this button to start the Auto-Program mode, during which the tuner will scan for all strong stations and assign them to the radio preset buttons.

Press this button to change the viewing angle of operating unit.

ZOOM/ ANGLE

For DVD discs which have alternate viewing angles encoded, when you see the "angle mark" symbol advising you that these angles are available, longer press this button to see them. Shortly press it to increase the picture in size.

EQ/LOUD

Press repeatedly to cycle through the different equalizer curve presets you may wish to use for enhanced listening.

In Disc Playback mode, press for fast forward/reverse playback.

Page 12

Remote Control

-12-

Using the Remote Control

Face the remote control towards the player front face IR mark (remote control signal

receiver).

Operation angle: About 30 degree in each the direction of the front of the IR mark.

Note :

The lithium cell in the battery compartment of remote control has been secured for transport with a foil. Before initial use please remove this foil so that the remote control is ready for operation.

Button

Ref #

Function

0-9

+10/

1-6

Six numbered preset buttons store and recall stations for each band.

This button is used with the other number buttons for use with two-digit number entries. In Bluetooth menu, it serves as the hash

button on your mobile handset.

ENTER

This button is used to confirm selections and settings within many of the menus in the OSD system.

Use to input numerical values during programming, with the GOTO button, or to directly select a track to play. In addition, in Radio Mode (when RDS is engaged), 0 serves as the TA button and 9 serves as the AF button.

Preparing the Remote Control

1.First push to inside as the direction indicated by the arrow (See ) then remove battery holder as the direction indicated by the arrow (See ).

2.Replace battery. Set a new battery property with (+)side up as illustrated (See ).

3.Insert the battery holder. Push holder to the original position(See ).

Inserting the Battery

Page 13

Basic Operation

-13-

ADJUSTABLE ITEMS:

COLOR: 0 to 32

Adjust the color for the picture-lighter or darker.

BRIGHT: 0 to 32

Adjust if the picture is too bright or too dark.

CONTRAST: 0 to 32

Adjust the contrast of the bright and dark portion.

TFT Monitor Adjustment

when playing a DVD, touch screen of “ ” range to enter the main menu.

Touch “SETUP ” ICON to enter the setting menu, the message display in screen:

TINT: 0 to 32 Adjust the tint if the human skin color is unnatural.

-Adjustable when “NTSC” is selected for “NTSC/PAL”.

ANIMATION In RADIO mode, you can change the playing time of animation among of “10SEC, 30SEC, 60SEC,90SEC, 2MIN, 3MIN,

4MIN and OFF ”.

Note:

Please set the playing time of the anim ation to “ 10SEC ” for the first, when you turn the unit on.

Rear View Camera

When connecting the rear view camera the mirror image of the rear view is automatically displayed on the monitor when you change the gear to the back position. (Note: additional monitor can not display the image.)

BT ON/OFF

Touch to switch the BLUETOOTH function ON and OFF.

Touch “SYSTEM” on the setting menu, touch the “ / ” ICONS to select the adjustment item, touch the “ / ” ICONS to adjust the selectment item, it depends on your habit to setup the data.

AUDIO QUALITY ADJUSTMENT

In any mode, touch the “ ” ICON to enter the home menu, touch “ SETUP ” ICON to enter the Setting mode.

The message will display in the screen :

TREBLE

BASS

RADIO LOC/DX

COLOR

TINT

CONTRAST

Page 14

-14-

Basic Operation

FADER: F 0-10 to R 0-10

Adjust sound balance between front and rear speakers.

ADJUSTABLE ITEMS:

TREBLE: -14 to +14

Adjust treble level.

BALANCE: R 0-10 to L 0-10

Adjust sound balance between left and right speakers.

SUBWOOFER

Touch to switch the SUBWOOFER function ON and OFF.

BUZZER SET

Touch to switch the BUZZER BEEP function ON or OFF.

BASS: -14 to +14

Adjust bass level.

SETTING AUDIO MODES

In any mode, touch the “EQ” range on the touch screen (or press the EQ button on remote control) to select one of the preset sound modes: ROCK/POP/ JAZZ/CLASSIC/FLAT. The information will display in the monitor as follow:

POP

FLAT

ROCK

CLASSIC

JAZZ

It depends on your habit to select the Audio mode.

Hour adjustment: 0-23

ADJUSTABLE ITEMS:

Minutes adjustment: 0-59 Time format selectment : 12H/24H

Touch “SOUND” on the setting menu, touch the “ / ” ICONS to select the adjustment item, touch the“ / ” ICONS to adjust the selectment item, It depends on your habit to select the Audio mode.

RESET FACTORY SETTINGS

RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object. The RESET button is to be activated for the following reasons: A. Initial installation of the unit when all wiring is completed. B. All the function buttons do not operate. C. Error symbol on the display.

NOTE:

If RESET is selected, all memory data will deleted, please re-adjust.

RESET

RET

In SETTING mode, touch “TIME” to select the time mode.

SETTING THE TIME

touch the “ / ” ICONS to select the adjustment item, touch the “ / ” ICONS to adjust the selectment item, then touch “ ” ICON to confirm. It depends on your need to setup the data.

MINUTES

12H/24H

HOUR

Page 15

-15-

UNIT KEYS

Control Panel

USB OPERATION

For information about connecting a USB device, please see page 35.

IR SENSOR

AUXILIARY INPUT JACK

Insert an external device to this AUX jack in order to have audio output of the device through the unit.

RESET BUTTON

Press this button to return to factory settings.

PANEL RELEASE BUTTON

Press this button to remove the control panel.

MIC

Microphone.

SD CARD SLOT

Touch Area

Page 16

Touch Area

Control Panel

-16-

(POWER On/Off )/MODE

Touch this button to switch the device on. WELCOME appears in the display. Touch it again to switch the device off. SEE YOU appears in the display. In playback mode, you can touch this range to select the input mode by touching repeatedly until the proper one is found :

DISC > AUX IN > RADIO > BT MUSIC .

MOD E

(EJECT)

To insert a disc, touch this button. The panel will swing downward, exposing the slot. Insert the disc, label side facing up, until the mechanism senses its presence and draws the disc in. The panel will automatically return to its previous position.

(PLAY/PAUSE) /CH 1-6 (RADIO PRESET)

A) In Disc Playback Mode Touch this button to pause playback, touch again to resume playback. B) In Radio Mode Touch repeatedly to preset station. With this system a total of 30 stations can be stored in the memory. Each band store up to six preset stations. The stations might be FM1, FM2, FM3, AM1 (MW1) and AM2 (MW2) band. The operation as below:

-Store in Memory > Select the frequency band.

> Touch repeatedly this range to select the desired memory key.

> Select the station. > Keep the desired memory key touched in until the station is heard again after a brief interruption.

CH1 -6

UNIT KEYS

(touch sensitive control)

Page 17

Control Panel

BN D

BAND

Touch to switch between the 3FM and the 2AM(MW) bands. The designation of the corresponding level - FM1, FM2, FM3, AM1(WM1), AM2(MW2) - is shown in the TFT.

-17-

SELECT BUTTON

To access the available adjustment settings for audio and video, touch repeatedly to cycle through and select them:

SE L

Tint Contrast Bright Color Bluetooth

Buzzer Volume Bass Treble Balance Fader

-Retrieve a preset station Touch repeatedly to retrieve a station which had been stored in the

memory in advance the chose number is shown on display.

MUTE/PTY

In any mode, touch to mute the sound. In RDS Radio mode, touch repeatedly to step through the different station categories (such as NEWS, INFO, SPORTS, etc). When you have selected the category, the radio searches for stations in that category.

MUT E

PTY

Norma l Playback 2 x 4x 8x 2 0x

UP/DOWN BUTTONS

In Disc (or USB) Playback mode, briefly touch or to skip forward or back one track. Touch and hold for more than two seconds to begin Fast Forward (or for Fast Reverse) mode. Press the button again as needed, to cycle thru the range of available speeds.

In Radio mode, briefly touch these buttons to manually tune the radio in single steps. Touch and hold for two seconds for the radio to seek the next station automatically.

ANGLE (Screen position)

You can change the viewing angle of the operating unit. Touch up to four times in order to select your desired position.

VOL-/VOL+ BUTTON

In normal mode, this button is used to adjust the volume to desired level. It is also used as an UP/DOWN button when audio or video settings are being adjusted when accessed using the SELECT button.

Page 18

Touch Screen Operation

-18-

Selecting The Frequency Band

Touch "BAND" repeatedly to select

desired band. Band selection will cycle as follows:

FM1 FM2 FM3

AM2(MW2)

AM1(MW1)

In any mode, touch the “ ” ICON on the touch screen to enter the main menu, the information will display :

Press ST/MO button on the remote control to select the MONO or STEREO mode. (When Stereo mode is activated, the ST symbol will appear.)

When an FM stereo broadcast is hard to receive

RADIO mode

Touch the RADIO ICON in home menu to enter the RADIO mode:

The touch buttons at the base of the touch monitor:

2 3

2. Button

Touch this ICON to adjust monitor to

desired angle.

1. Power button

In any mode, touch the “ ” ICON to switch the unit off. The monitor will draw in automatically.

3. Button

Touch this ICON and the panel will

slide downward to allow for inserting or ejecting of media discs.

4. Button

Touch this ICON to enter the SETUP mode.

Automatic Search

During Radio mode, touch and hold (for more than 2 seconds ) either “ / ” ICONS to start search for a radio station automatically.

Start Searching For a Station

During Radio mode, briefly touch “ ” to increase frequency by one step of channel spacing.

Briefly touch “ ” to decrease frequency by one step of channel spacing.

Manual Search

To tune in strong-signal FM Station only (LO/DX function)

Touch the “ ” ICON to enter the home menu, then touch “SETUP” icon to enter the setting menu. The message will display as below :

DXDX

STST

FLATFLAT

SWFSWF

22 33

87.5087.50

90.0090.00

98.0098.00

89.5089.50

107.00107.00

106.00106.00

08:3608:36

FM1FM1

107.00107.00

MHZMHZ

AFAF

Page 19

-19-

Automatic Preset Setup In Radio Mode, touch and hold (for more than 2 seconds) the "APS" section to activate automatic station storage. The radio searches within the current frequency band, e.g. FM1, for the stron ger signal level until the search cycle has finished. The six strongest stations are then allocated to the corresponding storage locations. Then the station of the first storage location is set. Scan Function In Radio mode, briefly touch “APS” on the touch screen, the radio briefly plays all the preset stations of the frequency band.

Automatic Memory Storing & Program Scanning

Touch Screen Operation

- Store in Memory

> Select the frequency band.

> Select the station. > Keep the desired memory key pressed in until the station is heard again after

a brief interruption.

- Retrieve a preset station

Touch the 1-6 ranges briefly to retrieve a station which had been stored in the memory in advance. The chosen

preset number will appear in display.

Touch “ SOUND ” on the setting menu, touch the “ / ” ICONS to select the “ Radio LOC/DX ” item, touch “ / ” ICONS to choose between the LOC and DX mode of Local and Long-distance traffic news.

Storing Stations In Memory

Setting Memory

With this system, a total of 30 stations can be stored in the memory of six buttons. Each band stores up to six preset stations. The stations might be FM1, FM2, FM3, AM1(MW1), and AM2(MW2) band. The operation is as follows:

DXDX

STST

FLATFLAT

SWFSWF

22 33

87.5087.50

90.0090.00

98.0098.00

89.5089.50

107.00107.00

106.00106.00

08:3608:36

FM1FM1

107.00107.00

MHZMHZ

AFAF

TREBLE

RADIO LOC/DX

RDS FUNCTION

In Radio mode, touch the “ ” ICON to enter the main menu, then touch the

“ SET ” ICON to enter the set mode. The message in the display : (only in the “TA ON” mode. )

REGION SET

PI SET

MUTE

Page 20

Touch Screen Operation

TA Traffic Announcement (Priority For Traffic Information)

In Radio mode, touch the cursor button to switch the TA function ON or OFF. When the TA function is activated, the TA symbol appears in the display. During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK). If an FM station is being received which transmits the latest traffic announcements from time to time, the TP display

lights up.

When the TA function is switched on, the FM traffic automatically interrupts

CD operation (the word TRAFFIC appears in the display).

The volume level is increased to the minimum value for the transmission of traffic announcements.

After the traffic announcements has finished, previous program will resume.

REGION SET

Touch to switch the REGION function ON or OFF.

ADJUSTABLE ITEMS:

PI SET

Touch to change between PI MUTE and PI SOUND.

-20-

PI SOUND : If switching occurs the sound of another station is heard for less than one second.

PI MUTE : The sound of another station is suppressed.

REG FUNCTION

At certain times some stations divide up their programs into regional programs with varying content.

REG ON : The message “REG ON” will appears in the display for a few seconds.

Note :

- The display capacity is limited. It is possible that in the double display mode some segments of the display are deleted.

- The function REG ON prevents the radio from switching to alternative frequency which have a different regional program content.

REG OFF : The program identification (PI) of the regional program is ignored during the search for an alternative frequency (AF) or a program identification (PI).

PI MUTE / PI SOUND

(only for radio operation)

If you are in an area where two program identifications (PI) overlap, you can

select the option PI SOUND and PI MUTE for playback of the sound. Alternate switching of the program identification should be avoided.

Interruption of the TA Function: If you would like to interrupt the current traffic announcement, briefly touch TA on the screen. This will switch off the TA mode.

Touch “ RDS ” on the setting menu, touch the “ / ” ICONS to select the adjustment item, touch the “ / ” ICONS to adjust the item.

Page 21

Touch Screen Operation

PTY Selection of the program type appears

beside the stations name. Some FM stations also transmit information on the type of program. This information can be displayed by your car radio. Examples of such types of program are :

SPORT NEWS POP WEATHER ......

With PTY function you can specifically select stations transmitting a particular type of program. Touch the PTY ICON on screen repeatedly to call up the PTY selection menu. The message “PTY SEEK” then appears briefly in the display.

When PTY has been selected the radio starts searching for corresponding PTY information and stops when the PTY information has been found, “NO PTY” appears in the display. If the PTY information being searched for no longer exists, the PTY function automatically switches to normal mode.

-21-

If the AF symbol flashes in the display, the AF function is selected but no RDS signal can be received at the moment.

Note : The status of the AF function is shown by an AF symbol in the display. If the AF symbol appears in the display, the AF function is switched on and RDS transmission data is being received.

AF FUNCTION

(Alternative Frequencies)

In Radio mode, touch the cursor button to switch the AF function ON or OFF.

can vary for a few

minutes

AF is a function that works with the help of RDS (Radio Data System) and can only be used with FM stations. The radio searches in the background for the best frequency reception of the station that has been tuned into.

Touch AF on touch screen for more than 2 seconds, the AF function is activated. The AF symbol appears in the display.

When the AF function has been switched on, the radio continuously tests the signal strength of the AF frequency. The test interval for each AF frequency depends on the signal strength of the current station and

in the case of weak signals. Whenever the new AF frequency is stronger than the station that is currently tuned in, the radio switches to this frequency for a short time and the message “NEW FREQUENCY” is displayed for one or two seconds.

PTY FUNCTION

In Radio mode, touch “PTY” ICON to select the Program type.

DXDX

STST

FLATFLAT

SWFSWF

22 33

87.5087.50

90.0090.00

98.0098.00

89.5089.50

107.00107.00

106.00106.00

08:3608:36

FM1FM1

107.00107.00

MHZMHZ

AFAF

Page 22

-22-

Touch Screen Operation

DVD MODE

To enter the main menu

Mute function

Intro Function

Random Function

Repeat Function

To increase the volume level

To decrease the volume level

To search the disc with numbers

Play/Pause the disc

Stop

To search fast backward

To search fast forward

Next menu

In any mode, touch the “ ” ICON to enter the main menu. Touch the DVD ICON on the main menu to enter the DVD play mode. The message will display as below: (When Parking Brake is applied.)

To skip the previous track

To skip the next track

To select the viewing angle

To show/hide the Subtitle (depending on the DVD)

To change the AUDIO setting (depending on the DVD)

ZOOM IN and OUT

To display the SETUP menu

Previous menu

On screen- display

To show / hide the clock

Loudness Function

Subwoofer Function

Redialing

Registering devices with one another. In bluetooth mode, touch to call up the bluetooth menu .

To select the Equalizer mode

In DVD mode, touch to display the root menu. In VCD mode, touch to switch the PBC ON and PBC OFF.

MENUMENU

PBCPBC

Switching on and off an Alternative frequency

Turning pre-switching for traffic announcements on and off

To search the disc with numbers

Page 23

Touch Screen Operation

DVD/VCD/CD/MP3:

Norma l Playback 2 x 4x 8x 20x

Rapid Forward/Rapid Reverse

During DISC playback, touch / for rapid forward/reverse.

The speed of rapid forward/ reverse changes according to the disc as follows:

Pause (still picture)

Touch during playback to temporarily pause play. Touch again to return to normal playback.

Note :

For some VCD2.0 disc (PBC-playback control), above these buttons may be unavailable.

Skipping Track

During DISC playback, touch / to skip to next/back one track.

Use the direction keys ( / / / on remote control to move the enlarged picture.

Zoom Function

Repeatedly touch for zoom-in/ zoom-out rates as follows:

“zoom 2, zoom 3, zoom 4 , zoom ½, zoom 1/3, zoom 1/4 , zoom off . ”

SELECTING THE PLAY MODES

During the Disc playback, touch the “RPT, RDM, INT ” to select the different playing modes.

Stopping Play

Touch ICON to stop the unit playback. Touch to start play.

BASIC OPERATION

-23-

Note:

Press UP to invert an image. Press DOWN to mirror an image. Press LEFT to rotate an image to left. Press RIGHT to rotate an image to right.

When JPEG disc playback is in normal mode use arrow buttons to rotate the picture.

1). REPEAT FUNCTION

1. Continuously repeat at the current chapter/track, when selected REP-ONE mode.

2. Select REP-ALL mode to continuously repeat all chapter/track on the current disc.

REPEAT OFF

REPEAT ONE REP EAT ALL

FOR VCD/CD/MP3 :

Touch the “ ” ICON (or press and hold the 2/REPEAT button on remote control) to select REPEAT mode

as follow :

FOR DVD :

Touch the “ ” ICON (or press and hold the 2/REPEAT button on the remote control) to select REPEAT mode

as follow :

REP EAT ALL

CHAPTER REP EAT ON TITL E REP EAT ON

REP EAT OFF

FOR CD :

Touch the “ ” ICON (or press and hold the 3/INTRO button on the remote control) to play the previous 10 seconds

of each track/chapter on disc. (Touch it again to cancel this mode)

2). INTRO FUNCTION

Page 24

-24-

Touch Screen Operation

INTRO function

Refer to page 23.

RANDOM function

Refer to page 24.

FOR DVD/MP3 :

For DVD/MP3, the INT button is not available.

TOP/RPT/INT/RDM FUNCTION (Only for the remote control.)

TOP function

For DVD/VCD/CD/MP3: Press to select the first track/chapter to

play.(Depending on the disc used for VCD)

REPEAT function

Refer to page 23.

FOR VCD :

Touch the “ ” ICON (or press and hold the 3/INTRO button on the remote control ). The following menu is

displayed:

SEQ PLAY INTRO 1

Note:

the previous 10 seconds of each track/chapter on disc. (Touch it again to cancel this mode.)

When INTRO Mode is selected,

player will play

3). RDM(RANDOM) FUNCTION

During DISC playback, touch the “ ” ICON (or press and hold the 4/RANDOM on the remote control). Each playing,

the order is different. (Depending on the disc used for VCD) Touch it again to cancel this function.

DISC Search (GOTO)

FOR DVD :

Touch “GOTO” and screen will display the following message :

Touch / to select the adjustment item, select the item you want to watch through CHAPTER/TIME setting by touching the numberic buttons. Touch the ENTER button to confirm.

DV D TT 01/01 CH 03/31 0 :01:44

FOR VCD (With PBC OFF):

Touch / to select the adjustment item, then select the item you want to watch through TRACK/TIME setting by touching the numberic buttons. Touch the ENTER button to confirm.

VC D TRK 01/19 PBC 0:0 1:44

Touch “GOTO” and screen will display the following message :

Page 25

-25-

NOTE:

For CD(audio) Disc, touch OSD button is not available.

E.Touch or Press OSD for the fifth time: The message on the screen will be cleared for SVCD and VCD.

2.Example for VCD/SVCD/CD:

F. Touch or Press OSD for sixth time: The message on the screen will be cleared.

ON-SCREEN DISPLAY FUNCTION

DVD TT 01/01CH 04/31 C -0:01:32

C.Touch or Press OSD for third time:

Touch Screen Operation

During playback, touch the OSD section, it will display the following as below :

OSD

1. DVD: A.Touch or Press OSD for first time:

Title Number, Total Title Number, Chapter Number, Total Chapter Number of this Title of the disc currently being played will be shown on the screen, along with the elapsed time.

DVD TT 01/01CH 04/31 C 0:02:06

D.Touch or Press OSD for fourth time:

DVD TT 01/01CH 04/31 T 0:16:00

E.Touch or Press OSD for fifth time:

DVD TT 01/01CH 04/31 T -1:36:55

B.Touch or Press OSD for second time:

½ ENG 2CH OFF OFF

A.Touch or Press OSD for first time:

VCD TRK 1/19 PBC C 0:01:36

B.Touch or Press OSD for second time:

VCD TRK 1/19 PBC C -0:06:0 6

C.Touch or Press OSD for third time:

VCD TRK 1/19 PBC T 0:02:12

D.Touch or Press OSD for fourth time:

VCD TRK 1/19 PBC T -1:23:06

3. Example for MP3

A.Touch or Press OSD for first time:

CDrom TRK 2/76 C 0:00:36

B.Touch or Press OSD for second time:

CDrom TRK 2/76 C 0:03:38

C. Touch or Press OSD for third time: The message on the screen will be cleared.

Page 26

-26-

DVD/VCD Special Function

Touch Screen Operation

Notes:

- The angle number is different according to the disc.

- The function only works with discs having scenes recorded at different angles.

- When no different angle is recorded, will be displayed at

screen left top corner.

“ INVALID KEY ”

During DVD playback, touch the ANGLE ( ) button on the touch screen.

3. Multi-Angle Function (for DVD Only)

Each time the button is pressed, the number of the angles change in sequential order.

4. Title Menu Function

For DVD:

If the DVD has multiple titles recorded on the disc you can select preferred title from the title menu to start playback.

- During DVD playback, press TITLE button on the remote.The title menu is display.

- Select preferred title by the cursor button and confirm by pressing the ENTER button.

For VCD:

Press TITLE/PBC button on the remote control while the disc is playing, you can switch between "PBC ON"and "PBC off" mode.

MONO LEFT MONO RIGHT

STEREO

MIX-MONO

For VCD/CD:

During playback, touch the AUDIO section of the touch screen (or press AUDIO on the remote). It is possible to switch the sound between monaural and stereo sound as follows:

2. Multi-Audio Language Function

For DVD:

During DVD playback, touch the AUDIO section on touch screen (or press the AUDIO

on the remote). Each time the button is pressed or touched number of the audio soundtrack language changes on sequential order.

Notes:

- The language number is different according to the disc.

- Some disc only contain one language soundtrack.

- When none or different language soundtrack is recorded, will be display at screen left top corner.

“ INVALID KEY ”

Notes:

- The language number is different according to the disc.

- Some discs only contain one subtitle language.

- When none or different subtitle language is recorded, “ INVALID KEY ” will be displayed at screen left top corner.

During DVD playback, touch the SUBTITLE section on touch screen (or press SUBTITLE on the remote).

1. Multi-subtitle Language Function (for DVD Only)

Each time the button is pressed or touched the number of the subtitle language changes in sequential order.

Page 27

SETUP

-27-

USING THE MENU

SYSTEM SETUP

TV S YSTEM SC RE EN S AVE R TV T YP E PAS SWORD RAT IN G DE FAULT

EXIT

SYSTE M SETUP

NT SC

PAL AU TO

EXIT

SYSTE M SETUP

TV S YSTEM SC RE EN S AVE R TV T YP E PAS SWORD RAT IN G DE FAULT

Overview Of The Main Menu

(1). System Settings (2). Language Settings (3). Audio Settings (4). Video Settings (5). Digital Settings

(1) (2) (3) (4) (5)

TV TYPE SETUP

This player is capable of playing discs recorded in either PAL or NTSC formats. Make the selection based on whether you are connecting the unit to a PAL TV or an NTSC TV. You can also set the unit to AUTO (autoselect). The disadvantage to autoselect is that each time you turn the unit on it checks to see what kind of monitor is connected, which causes a small delay and some flickering of the display image which you may find unpleasant.

OF F

EXIT

SYSTE M SETUP

TV S YSTEM SC RE EN S AVE R TV T YP E PAS SWORD RAT IN G DE FAULT

SCREEN SAVER SETUP

If the screen displays a static image for too long, some "burn-in" may occur, leaving a permanent trace of the image behind. To avoid this, turn ON the SCREENSAVER item. After a short period of inactivity on the monitor, the unit will substitute a moving image to avoid burn-in.

Touch Screen Operation

1. Touch the “ ” ICON (or press the SETUP button on remote).

2.The SETUP menu is displayed.

3. or by using the / / / buttons.

4. Touch “EXIT” to clear setup menu

(or press the SETUP on the remote control).

Touch directly to select preferred

item

Page 28

-28-

16:9

4:3 Letter Box

4:3 Pan Scan

TV DISPLAY SETUP

This is to select the appropriate TV aspect (4:3 or 16:9) according to the connected TV set. Normal/PS (For 4:3 TV) Played back in the PAN & SCAN style. (If connected to wide-screen TV, the left and right edges are cut off.) Normal/LB (For 4:3 TV) Played back in LETTER BOX style. (If connected to wide-screen TV, black bands appear at top and bottom of the screen.) Wide (For 16:9 TV) Select when a wide-screen TV set is connected.

-----

EXIT

SYSTE M SETUP

TV S YSTEM SC RE EN S AVE R TV T YP E PAS SWORD RAT IN G DE FAULT

1 KI D SA FE 2 G 3 PG 4 PG 13 5 PG -R 6 R 7 NC -1 7

8 AD ULT

EXIT

SYSTE M SETUP

TV S YSTEM SC RE EN S AVE R TV T YP E PAS SWORD RAT IN G DE FAULT

RATING

Select suitable parental guidance with the cursor buttons and confirm it by pressing the ENTER button.

4: 3P S

16 :9

4: 3L B

EXIT

SYSTE M SETUP

TV S YSTEM SC RE EN S AVE R TV T YP E PAS SWORD RAT IN G DE FAULT

Touch Screen Operation

PASSWORD SELECTION

The password must be used to make changes to the Parental Control menu below. The factory default password is

0000. You will be asked for the current password. Key in “0000” and then press

“ENTER” on remote control to confirm. You have the opportunity to change it and enter your new password. Then when you enter the Parental Control menu, you can make any changes.

Page 29

-29-

RE STORE

EXIT

SYSTE M SETUP

TV S YSTEM SC RE EN S AVE R TV T YP E PAS SWORD RAT IN G DE FAULT

DEFAULTS

Selecting the DEFAULT item and confirming RESTORE will return ALL personal settings you have made, including radio and TV presets, to the factory default settings.

LANGUAGE SETUP

OSD LANGUAGE SETUP

Select the preferred OSD language by touching directly the desired language.

AUDIO LANGUAGE SETUP

Select the preferred AUDIO soundtrack language by touching directly the desired language.

SUBTITLE LANGUAGE SETUP

Select the preferred Subtitle language by touching directly the desired language.

EXIT

OS D LA NG UAG E AU DIO LANG SU BT IT LE L AN G ME NU L AN G

EN GL IS H

GE RM AN SPA NI SH FR EN CH PO RT UG UE SE ITA LI AN RU SS IA N

LA NG UAGE S ET UP

EXIT

OS D LA NG UAG E AU DIO LANG SU BT IT LE L AN G ME NU L AN G

EN GL IS H

GE RM AN SPA NI SH FR EN CH PO RT UG UE SE ITA LI AN RU SS IA N

LA NG UAGE S ET UP

Touch Screen Operation

EXIT

OS D LA NG UAG E AU DIO LANG SU BT IT LE L AN G ME NU L AN G

EN GL IS H

GE RM AN SPA NI SH FR EN CH PO RT UG UE SE ITA LI AN RU SS IA N OF F

LA NG UAGE S ET UP

Page 30

DISC MENU LANGUAGE SETUP

Select the preferred DISC MENU langu age by touching directly the desired language.

-30-

EXIT

OS D LA NG UAG E AU DIO LANG SU BT IT LE L AN G ME NU L AN G

EN GL IS H

GE RM AN SPA NI SH FR EN CH PO RT UG UE SE ITA LI AN RU SS IA N

LA NG UAGE S ET UP

EXIT

AU DIO OUT

SP DI F/ OF F

SP DI F/ PC M

SP DI F/ RA W

AU DIO S ET UP

AUDIO SETUP

AUDIO SETUP (DIGITAL OUT)

Your DVD player can be connected to a home theater system with a coaxial digital audio jack for high quality sound. Digital audio output allows you to select SPDIF/RAW or SPDIF/PCM digital signal.

A. SPDIF/RAW

The coaxial output is connected to a receiver that accepts Dolby Digital or other signals. It works for most of the coaxial connections.

B. SPDIF/PCM

The coaxial output is connected to a receiver that accepts PCM SIGNALS.

VIDEO SETUP

BRIGHTNESS- The brightness of the

video signal (how light the picture is).

CONTRAST- The contrast of the video signal (the dark portions of pictures).

EXIT

BR IG HT NE SS CO NT RA ST HU E SAT UR ATI ON SH AR PN ES S

VI DE O SET UP

12 10

8 6 4 2 0

EXIT

BR IG HT NE SS CO NT RA ST HU E SAT UR ATI ON SH AR PN ES S

VI DE O SET UP

12 10

8 6 4 2 0

Touch Screen Operation

These settings allow you to set the video signal brightness, contrast, hue, and saturation.

Page 31

-31-

HUE- The hue of the video signal (the color of the pictures).

SHARPNESS- The sharpness of the video signal (the image setting acumination).

DIGITAL SETUP

EXIT

DY NAMIC R AN GE

DI GI TAL SE TU P

FULL 6/8

4/8 2/8

OFF

DYNAMIC RANGE CONTROL

Select DRC and adjust the dynamic range of a Dolby Digital encoded program. There are 8 steps between full compression and off compression.

EXIT

BR IG HT NE SS CO NT RA ST HU E SAT UR ATI ON SH AR PN ES S

VI DE O SET UP

+6 +4 +2

- 2

- 4

- 6

SATURATION- The saturation of the

video signal (the vividness of the color) all above can be adjusted to your tasters.

EXIT

BR IG HT NE SS CO NT RA ST HU E SAT UR ATI ON SH AR PN ES S

VI DE O SET UP

12 10

8 6 4 2 0

EXIT

BR IG HT NE SS CO NT RA ST HU E SAT UR ATI ON SH AR PN ES S

VI DE O SET UP

8 6

4 2

Touch Screen Operation

Page 32

-32-

AUX Operation

3). Sound from the external device will now be played back through the loudspeakers.

4). Touch the volume+/- sections on touch screen or use the VOL+/- on the panel to adjust the volume level.

Touch Screen Operation

On the front panel of this unit, there is an AUX IN jack. Follow the diagram below to connect analogue replay devices (only for the Audio connect. If you want to connect the Video, plug the RCA <Video input > on the back of the unit). Use this jack to replay sound of other replay equipment such as DVD players, computers, etc. via the loudspeakers.

2). In any mode, touch the “ ” ICON to enter the main menu. Touch “ AUX ” ICON to enter the AUX IN mode.

1). Please connect the external device with stereo jack plug the Aux in socket.

AUX IN JACK FRONT PANEL

AUX IN

Ground

Right

Lef t

Note:

Unit only supports the 3.5 mm audio Jack Pin Assignment as shown in

diagram.

FLAT SW F LOUDFLAT SW F LOUD

08:2608:26

AUX I N

Page 33

-33-

2). Set your bluetooth phone to “discover” the Car Kit .

Following your phone’s instruction guide for details, active your mobile

handset’s Bluetooth function, the handset will search for accessible Bluetooth devices.

3). Your phone will find this Car Kit .

Select this Car Kit from the list.

4). Enter passkey “8888”, then press “OK” to pair the Car Kit and the hand set, the word “PAIR OK ”, will display in the TFT.

1. “Pair” To Your Bluetooth Phone

Prior to using the Car Kit for the fist time, you must pair it with a Bluetooth-enabled mobile handset.

Note:

To achieve the best performance, always keep mobile phone within 2 meters of the unit.

1). Put Car Kit in pairing mode.

a. Press the POWER button to turn ON, the “BT”icon will flash on TFT. b. Touch “ PAIR ” on the screen

(or press and hold the “PAIR/ ” on the remote control) until the word “ PAIR ”

is displayed and is now

ready for pairing.

Touch Screen Operation

BLUETOOTH OPERATION

2. Using The Bluetooth Car Kit. Once connecting is complete, you

may access the following function. Some of the below mentioned funct ions only accessible for handset supported with hands-free profile.

5). Select the “CONNECT” from the list on the phone, if you connect succes sfully, the “BT” ICON remains solid on the screen, then you can operate the function of bluetooth about the unit.

Touch the “ ” ICON, the word “ DIAL NUMBERS ” display on the TFT. You can touch the number section on screen, and then touch

“ ” ICON to call.

MAKE A CALL

IMPORTANT:

1). If the pairing can not be completed

within approximately 2 minutes while pairing mode is activated, you will need to reattempt pairing (See steps 2-5 above).

2). After pairing is completed, if the“BT”

ICON is stilling flash on the TFT, please follow the steps to reattempt pairing through your handset until the

“BT” ICON remains solid on screen.

Please note : “ ” and “ ” serves as the “ ” and “ ” button on your mobile handset.

Note: When you dial the wrong number, you can touch the screen “ ” to delete the wrong number. (You can also press the “ ” button on the remote control.)

1380013800013800138000

call d ial outcall d ial out

The following steps describes pairing instructions for a typical Bluetoothenabled mobile handset.

Page 34

During conversation in progress, tune the Volume switch until you reach the desired volume level.

ADJUST THE VOLUME

Note:

1). Before using the please check your phone’s

instruction guide or contact phone man ufacture if you are not sure if your phone supports the hands-free Bluetooth function.

2). When operating the

3).

Bluetooth function

with this unit,

Bluetooth func tion, you should only need to pair your phone one time. After that, they should automatically pair within 3 minutes each time you turn on your unit.

If you choose not to use the Bluetooth

function select BLUETOOTH OFF.

-34-

Touch Screen Operation

ANSWER A CALL

After you hear the ring tone, a incoming telephone number will display on the TFT monitor. Touch “ ” to answer or

press the “PAIR/ ” button shortly on the remote control.

During talking mode, user can touch “ ” (or press the “PAIR/ ” button on the remote control ) to transfer the audio

from the unit back to the mobile phone for privacy.

CALL TRANSFER

In Bluetooth menu, touch the “ ” ICON (or press the “BND/ ” button briefly on the remote control ), the message will display “CALL EJECTED/CALL HOOKED”.

END/REJECT A CALL

Note:

Please make sure it supports the Bluetooth A2DP & AVRCP profile.

In Bluetooth mode, touch the “ ” ICON to enter the home menu, touch the

“BT MUSIC” ICON to enter the BT MUSIC Mode.

PLAY BT MUSIC

1380013800013800138000

call E STABLI SHcall E STABLI SH

In Bluetooth menu, touch “ ” ICON (or long press “ BND/ ” on the remote control), the “DIAL LAST CALL /DIAL OUT NOW ” will display on the TFT monitor.

REDIAL LAST NUMBER

FLAT SW FFLAT SW F

BLUETOOTH MUSIC

Page 35

CO LORCO LOR

JP EGJP EG

JP EG 0 00 1-0 1 JP EG 0 00 1-0 1

00 01-0 100 01- 01

00 02-0 100 02- 01

00 03-0 100 03- 01

00 04-0 100 04- 01

00 05-0 100 05- 01

00 06-0 100 06- 01

OS DOS D

00 01-0 100 01- 01

-35-

USB Operation

(USB Storage Capacity : 8GB)

Following the diagram below, connect your USB device by USB connect cable to the front panel USB port.

Touch Screen Operation

If it is properly connected, the device will be mounted and start playing automatically. The information like following:

2. JPEG file operations

In USB playback mode, you can touch directly the “ ” icon to choose JPEG mode, the message will display as below :

File Playback Operation

All the playback operation function is same as the operation on CD/MP3 play.

()Use your finger to touch directly the

desired track to start play

1). Selecting other file

Touch or press “ / ” once while viewing a picture to advance to the next /previous file. (You can touch directly you desired picture to start play.)

4). To stop viewing at any time, press stop

the JPEG menu appear, you can choose other item.

3). To rotate picture

Press “ / ” while showing a picture to rotate the picture clockwise or counter clockwise.

2). To flip the picture

Press “ / ” while viewing a picture to flip picture horizontally or vertically.

JP EG 0 00 1-0 1 JP EG 0 00 1-0 1

00 01-0 100 01- 01

00 02-0 100 02- 01

00 03-0 100 03- 01

00 04-0 100 04- 01

00 05-0 100 05- 01

00 06-0 100 06- 01

00 03-0 100 03- 01

1. MP3/WMA file operations

78 4784

MP 3MP 3

[M P3 ][M P3 ]

IT LE / SON G: TRA CK 03 / IT LE / SON G: TRA CK 03 /

00 10 01

00 20 02

00 30 03

00 40 04

00 50 05

00 60 06

00 70 07

00 80 08

00 60 06

ID 3ID 3

MP 4KY- 1MP 4KY- 1

SP ICYR -02SP ICYR -02

USB IN

Page 36

Touch Screen Operation

3. MOVIE or MPEG4 file operations

In USB playback mode, you can touch directly touch the “ ” ICON to choose movie mode, the message will display as below :

MP 4MP 4

WM VWM V

WM V KEL ETV -01WM V KEL ETV -01

KE LETV -01KEL ETV- 01KEL ETV- 01KE LETV -01

MP 4KY- 01MP 4KY- 01

File Playback Operation

All the playback operation function is same as the operation on DVD play.

()Use your finger to touch directly the

desired track to start play

1. To prevent damage to the USB device, do not remove or disconnect it during playback. It is also a good practice to remove the USB drive during disc

playback.

IMPORTANT NOTE:

-36-

Changing From USB to DISC or SD card Playback modes

If you are in USB Playback mode and wish to begin playback of a disc already

in the player, touch the “ ” ICON to enter the home menu, then touch the “ ” (DISC) or “ ” (SD) ICON to enter the DISC or SD mode.

Changing From DISC to USB or SD card Playback Mode

If the disc present in the player is an DVD or VCD or MP3/WMA or MP4 disc,

touch the “ ” ICON to enter the home menu, then touch the “ ” (USB) ICON or “ ” (SD) to enter the

USB or SD mode.

Page 37

SD/MMC card OPERATION

(SD/MMC Storage Capacity : 8GB)

The unit can support playback MP3/WMA /JPEG/MP4 and Divx format which are

stored into SD and MMC memory card. Please read below before you start the operation of memory card.

-37-

Inserting the SD or MMC card .

Press in until you hear a “CLICK”.

Insert the memory card into slot with label side facing frontward.

Touch Screen Operation

Press in until you hear a “CLICK”.

Removing the SD or MMC card .

Remove the memory card.

After a SD or MMC card was inserted into the main unit card slot, the unit will start playing the files contained on the memory card. Once the unit reads the memory card successfully, the first file on the memory card will automatically start playback. Press the mode button repeatedly is allowing changing to other modes.

MODE CHANGE TO SD/MMC CARD

The operations are the same as USB mode, refer to see USB operation.

CHANGE DISC TO SD/MMC CARD

The operations are the same as USB mode, refer to see USB operation.

CHANGE SD/MMC CARD TO DISC

FILE PLAYBACK OPERATION

All the SD or MMC memory car playback operation functions are same as the operation on CD/MP3/WMA.

Please see “ MP3/WMA” operation for more details.

1. MP3/WMA file operations

3. MOVIE or MPEG4 file operations

All the playback operation functions are the same as the operation on USB play.

2. JPEG file operations

All the playback operation functions are the same as the operation on USB play.

Label side facing frontward

Page 38

MP3/WMA/JPEG/MPEG4 DISC PLAY

-38-

Touch Screen Operation

The unit is support MP3/WMA/JPEG/MPEG4. When a disc is inserted into player, the following picture will appear on the monitor. The unit will play the first track automatically. You can touch to directly others mode (MP3/JPEG /MPEG4) to play. EX. : When the MP3 mode is selected.

2. Press shortly or button on the remote control for forward or backward.

FAST FORWARD/FAST BACKWARD

1. Touch briefly “ / ” range on touch screen for fast forward / fast backward.

Touch directly to select the play mode and then touch the desired track to play. Or Use / / / on the remote control to select the play mode or item, then press ENTER button on the remote control to confirm.

Touch “REPEAT ”on the screen (or press and hold the “2/RPT” on the remote control) repeatedly can select two kinds of repeat play mode.

REPEAT FUNCTION

REP-ONE:

Play the same song over and over again.

REP ALL:

Play all songs on the disc, then repeats the entire disc over and over again.

NOTE:

In JPEG/MPEG4 mode, the details operations as same as MP3/WMA operation.

1 Current type (highlighted bar).

2 Current track (ID3 TAG display).

3 The current play mode(MP3).

4 Select the play mode(JPEG).

5 Select the play mode(MPEG4).

6 Current song in MP3 folder.

WM AW MA

Mp 3Mp 3

[M P3 ][MP 3]

IT LE / SO NG: TR ACK 03 / IT LE / SO NG: TR ACK 03 /

00 100 1

00 200 2

00 300 3

00 400 4

00 500 5

00 600 6

00 700 7

00 800 8

00 700 7

00 100 1

00 200 2

00 300 3

3 4 5 6

2. Touch or range on the touch screen to skip a track ahead or back.

MOVING TO ANOTHER TRACK :

1. Touch directly the desired song to start play.

3. Press or button on the remote control to skip a track ahead or back.

Page 39

Specification

-39-

NOTE:

Specifications and design are subject to modification, without notice, due to improvements in technology.

RADIO Section:

For 3 Bands For 2 Bands For 2 Bands (Europe) (Europe) (U.S.A.) FM FM FM Frequency Coverage: 87.5 to108 MHz 87.5 to108 MHz 87.5 to107.9 MHz IF: 10.7 MHz 10.7 MHz 10.7 MHz Sensitivity (S/N = 30 dB): 15 dBu 15 dBu 15dBu MW MW AM Frequency Coverage: 522 to1620 KHz 522 to1620 KHz 530 to1710 KHz IF: 450 KHz 450 KHz 450 KHz Sensitivity (S/N = 20 dB): 40 dBu 40 dBu 40 dBu

Audio Signal Output: 2ch&4ch line out Characteristics: (1)Frequency Response 20 Hz - 20 KHz (2)S/N Ratio 90 dB (JIS) (3)Wow and Flutter Below measurable limits

Generall :

Supply Voltage: 12V DC (11V-15V) Current Consumption: Less than10 A Signal System: Compositive video 1.0Vp-p 75 Discs Played: (1)DVD-VIDEO Disc 5"(12 cm) single-sided, single-layer 5"(12 cm) single-sided, double-layer (2)Compact Disc (CD-DA, VIDEO CD) 5"(12cm) disc

BLUETOOTH:

Bluetooth specification: V1.2 Class 2 Bluetooth profile supported: Headset, Handsfree and A2DP & AVRCP profiles Range of frequency: 2.4GHz Spectrum

TFT Monitor:

Monitor Screen Size: 4.3 Inch Wide Number of Pixels: 1440 X 234 pixels Color System: NTSC/PAL

Page 40

88-J4800-01

Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer.

Trouble Shooting

-40-

Inserting the disc in reverse direction

Press the RESET button. Front panel is not properly fixed into its place

The car ignition switch is not on

If the power supply is properly connected to the car accessory terminal,switch the ignition key to "ACC"

The fuse is blown

Replace the fuse

Presence of disc inside the player.

Remove the disc in the player, then put a new one

Insert the compact disc with the label facing upward

The disc is extremely dirty or defective

Clean the disc or try to play a new one

Temperature inside the car is too high

Cool off or until the ambient temperature return to normal

The built-in microcomputer is not operating properly due to noise

The antenna cable is not connected

Insert the antenna cable firmly

The signals are too weak

Select a station manually

SYMPTOM CAUSE SOLUTION

Television/video imageappears black-white

The color system is set incorrectly

Please switch to correct color system from menu

No television/video image appears

The unit is not connected to the parking brake detection switch

Make proper connection according to wire connection “ ”

The parking brake is not engaged

For safety reasons no television /video images are displayed while the vehicle is moving. Engaging the parking brake will cause images to be displayed.

The operation keys do not work

The radio does not work

Disc can not be loaded or ejected

No power

No color in picture

The disc format is not accordingto the TV-set used (PAL/NTSC)

Please the television mode of the choice accommodation

JPEG disc can not be played back

No JPEG files are recorded on the disc.

JPEG files are not recorded in a compliant format

Change the disc Record JPEG files using a compliant application

Change the disc