BOSS BV7995T User Manual

Download

Page 1

Page 2

BV7995T

Contents

In-Dash AM/FM DVD/MP3/CD Receiver With

4.3 Widescreen TouchScreen TFT Monitor With Built - in TV Tuner and USB Port

Precautions .....................................

Safety Information.........................

Disc Notes ....................................

Installation ....................................

Detaching the control panel ...........

Changing the control panel ............

Electric Connection ......................

Remote Control ...........................

Control Panel ................................

Touch Panel

Unit Keys ...................................

Basic Operations

TFT Monitor

Rear View Camera

Audio Quality Adjustments

Setting Audio Mode .....................

Reset The Factory Setting

Scroll Caption Adjustments ..........

Radio Operations ..........................

Listening to the radio ...................

Storing stations in memory ...........

Listening to a preset station .........

RDS Function .............................

DISC Operations ...........................

Basic Operations ........................

Select Playback Mode .................

AUX Operation ............................

On-Screen Disc Operations .........

................................

..........................

Adjustment .............

.....................

............

DISC Special Functions ................

Selecting audio languages ...........

Selecting Subtitles .....................

Selecting multi-angle views ..........

Title menu function ......................

Setup .............................................

General Setup ............................

Speaker Setup ...........................

Dolby Digital Setup ....................

Preferences Setup ......................

Defaults Table ............................

Other Main Operations ...................

USB Operations ..........................

TV Operations ............................

MP3/WMA/JPEG Play ................

MPEG4 Play ..............................

Specifications ...............................

Trouble Shooting ..........................

Page 3

Precautions

THANK YOU FOR PURCHASING THIS CAR DVD PLAYER .

Before operating the unit, read this manual thoroughly and keep it handy for future reference . To avoid injury or accident , read the following precautions before installing and operating the unit .

ON INSTALLATION

DO NOT install any receiver in locations where;

- it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.

- it may obstruct the operation of safety devices such as air bags, as this may result in a fatal accident.

- it may obstruct visibility.

DO NOT operate any receiver while manipulating the steering wheel, as

this may result in a traffic accident.

The driver must not watch the monitor while driving. IF THE DRIVER watches the monitor while driving, it may lead to

carelessness and cause an accident.

IF YOU NEED to operate the receive while driving, be sure to look ahead

carefully or you may be involved in a traffic accident.

IF THE PARKING BRAKE is not engaged.“ ParkingBrake” flashes on the

monitor, and no playback picture will be shown.

- This warning appears only when the parking brake wire is connected to the parking brake system built in the car ( refer to the electric connection)

ABOUT THE LIQUID CRYSTAL DISPLAY (LCD) PANEL

Do not press on the LCD panel on the unit as doing so can distort the picture or cause a malfunction . The picture may become unclear , or the LCD panel may be damaged .

NOTES ON CLEANING

-Clean the LCD panel with a slightly damp soft cloth.

-Do not use solvents such as benzine, thinner, commercially available

cleaners or antistatic spray .

Do not use alcohol to clean the screen . If your car was parked in a cold or hot place, the picture may not be clear . The monitor is not damaged . The picture will become clear the temperature in your car becomes normal .

Page 4

Safety Information

CAUTION:

THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD PLAYER CORRECTLYAS INSTRUCTED.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.

THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.Use of this copyright protection technology must be authorized by Macro vision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

REGION MANAGEMENT INFORMATION:

This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD Player, this DVD Player cannot play this disc.

Page 5

Disc Notes

Disc formats supported by this player

DVD

VCD

MP3

Audio and Video Discsize12cm

Audio Discsize12cm

Discs which cannot be played with this player

DVD-ROM DVD-R/DVD-RAM CDV CD-G

Handling and Cleaning

Dirt, dust, scratches and warping disc

will cause misoperation. Do not place stickers or make scratches on discs. Do not warp discs.

A disc should always be kept in its case when not in use to prevent from damaging. Do not place discs in the following places:

1.Direct sunlight

2.Dirty, dusty and damp areas

3.Near car heaters

4.On the seats or dashboard

Disc Cleaning

Use a dry soft cloth to wipe the surface. If the disc is quite dirty, use a soft cloth slightly moistured with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.

Note:

A disc may become somewhat scratched (although not enough to make it

unusable) depending on your handle it and conditions in the usage environment. Note these scratches are not an indication of any problem with the player.

Label side up

Do nottouch the underside of thedisc

Do not bend

Wipe the disc from center toward theoutside edge

Preparing New Discs with

Rough

Spots

A new disc may have rough edges on its inside and outside edges.If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc.Therefore, remove the rough edges in advance by using a ball point pen or pencil as shown on the right.To remove the rough edges, press the s ide of the pen or pencil against the inside and outside edges of the disc.

Rough spots on outside edge

Ball pointpen or pencil

Rough spots on inside edge

Page 6

Installation

NOTES:

Choose the mounting location where the unit will not interfere with the normal

driving function of the driver.

Before finally installing the unit, connect the wiring temporarily and make sure

it is

all connected up properly and the unit and the system work properly.

Use only the parts included with the unit to ensure proper installation. The use

unauthorized parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or

other

modifications of the vehicle.

Install the unit where it does not get in the driver s way and cannot injure the

passenger if there is a sudden stop, like an emergency stop.

If installation angle exceeds 30 from horizontal, the unit might not give its

optimum

performance.

Avoid installing the unit where it would be subject to high temperature, such as from subject to dust,

DIN FRONT/REAR-MOUNT

This unit can be properly installed either from "Front"(conventional DIN Front-mount) screw holes at the sides of illustrated installation methods.

direct sunlight, or from hot air, from the heater, or where it would be

dirt or excessive vibration.

or "Rear"(DIN Rear-mount installation, utilizing threaded

the unit chassis). For details, refer to the following

Page 7

Installation

SPRING WASHER

PLAIN WASHER

TAPPING SCREW

DASH BOARD

HEX NUT

METAL MOUNTING STRAP

CONSOLE

SLIDE BRACKET HOUSING

HEX BOLT

KEY PLATE

PLASTIC COVER

KEY PLATE

If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, first remove the PLASTIC COVER of the both sides away, then insert

the two KEY PLATE into left and right side of chassis as above illustration.

Page 8

Installation

How To Remove And Install The Front Panel

When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder.

Detaching The Front Panel

Before detaching the control panel, be sure to turn off the power.

1). Press the release button and the left hand side of the front panel will release. (FIG. 1)

2). Pull-off the front panel (FIG. 2) and keep the front panel into the case (FIG. 3)

Attaching The Front Panel

1). First insert the right hand side of the front panel into the hollow of the unit .

2). Gently push the left hand side of the front panel until you feel a “ Click” .

and then press the PWR button (2) briefly to switch the device ON.

Page 9

Panel Angle Adjustment

CHANGING THE CONTROL PANEL ANGLE

When you want to change the viewing angle of the operating unit to play, you can touch the secion on the touch screen (or press the button on the panel ) repeatedly to select the desired angle as follows:

Angle 1

Angle 2

Angle 3Angle 4

Caution:

Do not insert your finger behind the control panel.

Page 10

Electric Connection

WIRING CONNECTION

MAIN UNIT

TV ANT IN

ANTENNA CONNECTOR

IGNITION

SWITCH(B+)

MEMORY

BACK-UP(B+)

GROUND(B-)

ANTENNA

AUTO

RED

YELLOW

BLACK

BLUE

FRONT

Lch SPK.

REAR

Lch SPK.

CHOKE BOX

FUSE

WHITE/BLACK

GREEN/BLACK

ISO CONNECTOR

WHITE

GREEN

WHITE

GREEN

YELLOW

AUX(optional)

RCA CABLE

REAR RCAOUTPUT

CABLE (optional)

FRONT RCA OUTPUT

CABLE

(FOR RCALINE OUT VERSION ONLY)

GREY

GREY/BLACK

VIOLET

VIOLET/BLACK

FRONT

Rch SPK.

REAR

Rch SPK.

(B+)12V REAR CAMERASWITCH

(B-)PARKING BRAKE

REAR CAMERAINPUT

VIDEO INYELLOW RCH INRED

LCHINWHITE

GREY SUBWOOFER VIDEO OUT2 YELLOW

COAXIAL OUT BROWN RCH RED

LCH WHITE

FRONT RCA RED R

VIDEO OUT 1YELLOW

FRONT RCA WHITE L

Note: The (B-) parking brake wire must be connected in order for video images to appear on the monitor. If the wire has not been correctly connected, the message “PARKING BRAKE” appears on the monitor. (This wire must be connected to the (-) negative side of the parking brake system of your vehicle. Once you engage the parking brake system, you will be allowed to watch the video.)

Page 11

Remote Control

1.CLK

2.MODE

3.STOP

4.SETUP

5.MO/ST(AUDIO)

6. SUBTITLE LOCAL/DISTANT

7.REPEAT

8.GOTO

9. and

10.SEL

11. VOL+/VOL-

12. / / /

13.MENU SUB WOOFER

14.BAND(OSD)

15.POWER

16.PLAY/PAUSE

17.MUTE

Press this button to view the clock time. Press again to return to normal display mode. Press repeatedly to cycle through the various modes: TV>RADIO>DISC>AUXIN. Press once to pause playback. Press PLAY/PAUSE to resume playback. Please note: if you press STOP twice, playback will start at the beginning of the disc. Press this button to open the SETUP menu. In Radio mode, press this button to change between Mono and Stereo reception modes (when a station is weak, sometimes switching to Mono will improve sound quality). In Disc Playback mode, pressing this button opens the AUDIO setup menu for making changes to the way the soundtrack is reproduced. In DVD Disc Playback mode, pressing this button will allow you to change the subtitle language on discs which have this as an option. In Radio mode, press this button to change the radio reception sensitivity in stations are near or far. Pressing this button will open a menu presenting you with the playback repeat options available for that kind of disc. Press this button to begin playback at a moment in the program you designate. Use the number buttons to enter the data that is needed. Press these buttons to skip ahead or back one track.

(Note: In DVD

mode, press continually the twice to skip back one)

Press this button repeatedly to cycle through the various audio and video adjustments you can make: VOLUME, BASS, TREBLE, BALANCE, FADER, COLOR, BRIGHTNESS, CONTRAST and TINT. Use these controls to adjust the volume level. Use these buttons to navigate the various menus present in the product. Also, in TV mode, use the UP and DOWN arrows to change channels, and the LEFT and RIGHT arrows to fine tune a station. Press this button briefly to display the root level directory of a DVD disc. Press and hold this button to turn on or off the SUBWOOFER output. In Radio mode, press this button repeatedly to switch between the five radio bands: FM1 > FM2 > FM3 >AM1 > AM2. In Disc Playback modes, Press this button to see information about the disc currently in play. Press to turn the unit on or off. In Disc Playback mode, press to pause playback. Press again to start where playback stopped. In Radio mode (when RDS mode is engaged), press this button to make a selection within the PTY stations available. Press this button to turn off the audio. Press again to restore the sound to its prior volume level.

Page 12

Remote Control

18.TITLE/PBC

(Playback Control mode), AP (Auto-Program mode).

19.

20.ANGLE MARK BUTTON

21.EQ

22.SEARCH

23.ENTER

24.SKIP

25. 0-9 NUMBER BUTTONS

26.+10 BUTTON

27. RADIO PRESET BUTTONS

When playing a DVD, pressing this button will open the TITLE menu which is recorded on the DVD. When playing a VCD disc, press this button to create a PBC (Playback Control) menu for the disc to assist in making playback selections. In Radio mode, press and hold this button to start theAuto-Program mode, during which the tuner will scan for all strong stations and assign them to the radio preset buttons. Press this button to adjust the screen viewing angle (see page 7). For DVD discs which have alternate viewing angles encoded, when you see the "angle mark" symbol advising you that these angles are available, press this button to see them. Press repeatedly to cycle through the different equalizer curve presets you may wish to use for enhanced listening. In Disc Playback mode, press for fast forward playback. In TV mode, press to cause the tuner to search for the next channel on the TV band. This button is used to confirm selections and settings within many of the menus in the OSD system. In Disc Playback mode, press for fast reverse playback. In TV mode, press to add or delete a channel from the stored channel list. These buttons are used for numeric entry in many different menus. In addition, in Radio Mode (when RDS is engaged), 0 serves as the TAbutton and 9 serves as teh AF button. This button is used with the other number buttons for use with two-digit number entries.

Preparing the Remote Control

Inserting the Battery

1. Press the release catch on the battery drawer in the direction shown in the picture

below ( ) . Then with your fingertip pull the drawer out ( ).

2. Take careful note of the polarity of the battery before you remove it.

The (+) terminal must be UP as shown in the picture below ( ).

3. Insert a new battery, and push in the battery drawer until you feel a "click." ( )

Using the Remote Control

When you use the remote, be sure to be no more than six feet from the IR receiver

on the unit, and within 30º to the left or right of the IR window. Beyond these ranges,

the remote control may not communicate properly with the unit.

Page 13

Control Panel

Key Functions

Touch Panel

LUD

AUX IN

SWF POP 11:08

DISC

VOLUME-

193

BV7995T

Touch Screen Key :

1. (Angle) : Changing the viewing

angle of the operating unit .

2.TA : Turning pre-switching for traffic

announcements on and off . (For RDS)

3. AF : Switch on and off

and alternative frequency. (For RDS)

4. (Eject) : Touch it to insert and

eject the DISC .

SEL

AFTA

VOLUME+

MOD

SEL

217

7. : Previous

8.Volume+ : volume adjustment (+)

9.SEL : select the menu of the

Sound/Picture

10.Volume- : volume adjustment (-)

5. : To switch of the sound .

6.MOD

: operating mode selection .

Page 14

Control Panel

Unit Keys :

193

BV7995T

SEL

217

1.REL BUTTON

Press this button to release the front panel for removal . Refer to see page 7.

2. (POWER On/Off )BUTTON

Press this button to switch the device on. WELCOME appears in the display. Press it again to switch the device off. SEE YOU appears in the display.

3.VOL+/ VOL- knob

In normal mode, this knob is used to increase or decrease the volume. It is also used as an UP/DOWN knob when audio or video settings are being adjusted when accessed using the SELECT button.

4.SELECT KNOB

To access the available adjustment settings for audio and video, press this knob repeatedly to cycle through and select them:

Volume Bass Treble Balance Fader

Tint Contrast Bright Color BG Color

5. BAND BUTTON

In Radio mode,

FM3, AM1(MW1), AM2(MW2) .

press it repeatedly to select the desired radio band: FM1, FM2,

6. TA/AF BUTTON

TA Function [traffic Announcement] Button(for Rds Only)

In RADIO mode When you press the TA/AF button briefly , the TAfunction is activated, the TA symbol appears in the display .(press it again to turn off the TA mode).

Page 15

Control Panel

AF [Alternative Frequencies]

Longer press the TA/AF button , the AF function is activated. The AF symbol appears in the display . (Longer press it again to cancel this function .)

The function about RDS to see page 20 .

Note: In Radio mode, press and hold the SELknob for a long time to access the selection menu: REG ON/REG OFF, PI MUTE/PI SOUND, AF ON/AF OFF . Repeatedly the SEL knob to select the item and by using the VOL+/- to change .

7. APS, DISPLAY FUNCTIONS (using the SELECT knob)

Scan Function

In Radio mode, swing the SEL knob briefly in the APS/DISP direction , the radio briefly plays all the preset stations of the frequency band .

Automatic Preset Setup

In Radio mode, swing the SEL knob in direction of the APS/DISP for about 2 seconds to active automatic station storage. The radio searches within the current frequency band, e.g. Fm1, for the stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set .

Display ON/OFF Function:

In Disc mode, swing the SEL knob briefly in the direction of APS/DISP to turn off the display image (the monitor on the unit only) , the sound will stay on. (Swing it again to resume the playback picture mode.) You can press SEL knob briefly to select the “BG COLOR” by repeatedly pressing the SEL knob, then rotate the VOL+/- to select the background color among of the

“AUTO, BG COLOR: 01........BG COLOR: 11”, in “AUTO” mode, the monitor of

unit will change the background color automatically .

TV System Select

In TV mode, press the SELECT knob repeatedly to cycle through the different TV standards (NTSC, PAL, etc). If you are in European frequency mode, use the VOL+/- knob to select among the PALoptions.

8. MU (MUTE)/PTY BUTTON

Press this button briefly to select the MUTE or NOT .

In Radio Mode,

of the grogram type (examples of such types of program are : NEWS, POP.....)

press this button and hold for a bout 2 seconds to select the PYT

9. ANGLE (Screen position)

Press this button repeatedly to cycle through the different positions.

10. /CH 1-6 BUTTON(RADIO PRESET)

In Disc Playback Mode

a).

Press this button to pause playback, press it again to resume playback.

In Radio Mode

B).

Press this button repeatedly to preset station. (Please refer to see page 20 .)

Page 16

Control Panel

11. / BUTTONS (TUNE, SEEK, TRACK, SKIP UP/DOWN)

a) In DISC, USB mode:

if you wish to jump forwards or backwards press the SEL button (4) briefly in the or direction. (Note: in DVD mode, press the SEL button continually twice in direction to skip back one track during playback.) To wind through the tracks keep the SEL button pressed in the or direction for about 2 seconds. FF X2 appears in the display. Operating the SEL button again, the speed of rapid forward/reverse changes according to the disc

as follow:

DVD/VCD/CD/MP3:

b) In Radio Mode:

Move the SEL button in the direction of or in order to set a radio station manually. Keep the SEL taste pressed down in the or direction in order to start the search for a radio station automatically.

12. MODE BUTTON

Use this button to select an input mode by pressing repeatedly until the proper one is found:

TV>AUXIN>RADIO>DISC

If you are in USB Playback mode and want to select DISC mode, press the STOP button and then the GO TO button.

Normal Playback 2x 4x 8x 16x

13. (EJECT) button

Press it button to eject the DISC or insert the DISC to start play .

14. RESET button

Press this button can return to the original setup .

15. IR sensor

16. AUX Input Jack

For information about connecting a AUX device, please see page 25 .

17. USB PORT

For information about connecting a USB device, please see page 35.

18. TFT Display (liquid crystal display)

The operation of the TFT, please see page 17.

Page 17

Basic Operation

POWER On/Off

Press it to switch the device ON, press and hold about 2 seconds to switch the device OFF.

Ejecting The Disc

Use your singer touch the

range on touch screen ,

the control panel of the unit

you can insert the disc or eject the disc . (You can also press the button on the front panel to eject the disc or insert the disctostartplay.)

will swing downwards . Then

Select Sources

Touch the MOD

MOD

DISC

repeatedly section on the screen, the signals will display in the screen as follow :

AUX IN

RADIO

Touch screen

VOLUME+

Touch the screen the VOLUME+ to increase the volume level .

VOLUME-

Touch the screen the VOLUME- to decrease the volume level .

Mute Function

Use your finger touch the section , it will mute the sound but the disc continues playing. Touch it again to resume .

Setting The Clock

CLK

Touch the CLK section on the screen and hold for about 2 seconds the hour will flash , rotate the VOL+/- to adjust . Touch it again, the minute will flash, then use the VOL+/to adjust .

Volume Adjusting

Volume button

Revolve : clockwise to increase /

Anticlockwise to decrease .

Press the VOL+/- on remote control ,

to change the volume level .

Setting The Buzzer ON/OFF

Buzzer

Touch the SEL section on the touch screen to select the BUZZER item, and then touch the VOL+/- (or rotate the vol+ /vol-) to switch the BUZZER ON/OFF .

Setting Blue-tooth ON/OFF

SEL

Touch the SEL section on the touch screen to select the Blue-tooth item, and then touch the VOL+/- (or rotate the vol+/-) to switch the Bluetooth ON/OFF .

Page 18

Basic Operation

TFT Monitor Adjustment

During DISC playback, use your

SEL

finger touch briefly the SEL section on the screen (or press SEL button on front panel to across the Picture

selection menu, by repeatedly touch the SEL section, and then touch the VOL+/(or rotate the VOL+/-) to adjust the selected mode . (The corresponding value will show on the monitor )

DVD 11-0:44:36

LUD

touch to adjust

Volume Bass Treble Balance

POP

SWF

SEL VOL+VOL-

touch to select

DISC

)

mode

11: 08

MOD

Rear View Camera

When connecting the rear view camera. the mirror image of the rear view through the rear view camera is automatically displayed on the monitor when you change the gear to the back position. (The monitor on the unit only.)

Audio Quality Adjustment

During DISC playback, use your

SEL

finger touch briefly the SEL section on the screen (or press

to across the Sound mode selection menu, by repeatedly touch the SEL section, and then touch the vol+/(or rotate the vol+/-) to adjust the selected mode . (The corresponding value will show on the monitor )

Volume Bass Treble Balance

SEL button on the front panel )

FadeBuzzer

Contrast Bright ColorTint

FadeBuzzer

Contrast Bright ColorTint

ADJUSTABLE ITEMS:

COLOR: 0 to 32 Adjust the color fo the picture-lighter or darker. BRIGHT:0to32 Adjust if the picture is too bright or too dark. CONTRAST: 0 to 32 Adjust the contrast of the bright and dark portion. TINT:0to32 Adjust the tint if the human skin color is unnatural.

-Adjustable when NTSC is selected for NTSC/PAL .

““

DVD 11-0:44:36

LUD

touch to adjust

It`s depend on your habit to setup the data .

ADJUSTABLE ITEMS: Volume:

0to32

Adjust volume level by using VOL +/-.

-14to+14

Bass:

Adjust bass level by using VOL +/-.

Treble:

-14to+14

Adjust treble level by using VOL +/-.

POP

SWF

SEL VOL+VOL-

touch to select

DISC

11: 08

MOD

Page 19

Basic Operation

Balance:

R0-10toL0-10. Adjust sound balance between left and right speakers by using VOL + / -

Fader:

F0 10toR0-10.

Adjust sound balance between front and rear speakers by using VOL + / VOL - .

Setting Audio Modes

Touch the screen the DSP range

DSP

(or press the EQ/LOUD button on the remote ) to select one of the preset sound modes .

(Rock/Pop/Jazz/Classic/Flat) . The information will display in the monitor as follow :

DISC

TA AF

OSD

JAZZ

CLASSIC

11: 08

POP

ROCK

FLAT

DVD 11-0:44:36

LUD

RDM INT RPT

It`s depend onyour habit to select the Audio mode .

POP

SWF

CLKSWF LUD DSP

touch to select

A. Initial installation of the unit when

all wiring is completed. B. All the function buttons do not operate. C. Error symbol on the display.

RESET

VOL

NOTE:

If RESET is selected, all memory data will deleted, please re-adjust .

Scroll Caption Adjustment

In Radio mode:

You can adjust your desired scroll caption , the method of the operation as follow:

a). Press and hold the SETUP button

(for about 2 seconds) on the remote control, the adjustment scroll bar will display on the screen .

b). Use the VOL+/- to select among of

the “A, B, C ....X, Y, Z, and blank ”,

and use the / button on the front panel to ahead/back (proceed/ cancel) , and then press the SETUP button briefly to confirm .

FM1 106.30 MHz

LUD

SWF

POP

DISC

11: 08

Reset Factory Settings

RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object. TheRESETbutton istobeactivatedfor the following reasons:

(Press it button longer again to renew . )

Page 20

Radio Operation

Listening to the Radio

Switching To Radio Mode

Touch the MOD range repeat-

MOD

edly on the screen to select the

RADIO mode. (You can also press repeatedly the / MOD button to select the RADIO .)

the following information will appears\ on the display :

FM1 106.30 MHz

LUD

4 5 6

POP

SWF

2 31 MOD

Touch it to select the other item .

FM1 106.30 MHz

LUD

VOLUME- VOLUME+

ST/MON

SWF

POP

SEL

Touch it to select the other item, it will display the following as below :

DISC

11: 08

BND

DISC

11: 08

APSLOC

Selecting The Frequency Band

Touch the BND section on the

BND

touch screen repeatedly to select the band , screen band will show in turn :

You can also press the BND on front

panel repeatedly to select the band .()

FM1 FM2 FM3

AM2(MW2)

AM1(MW1)

Start Searching For a Station

Manual Search

During Radio mode, swing the SEL knob in direction (or touch the “ ” section briefly) to increase frequency by one step of channel spacing .

Swing the SEL knob in direction (or touch the “ ” section briefly) to decrease frequency by one step of channel spacing .

Automatic Search

During Radio mode, swing and hold (for about 2 seconds )the SELknob in

/ direction (or touch the section long) to start search for a radio station automatically .

FM1 106.30 MHz

LUD

SWF

TA AF

LUD

POP

DISC

DSP

PTY

Touch it to previous .

CLK

11: 08

When an FM stereo broadcast is hard to receive

Touch the ST/MON section on

ST/MON

touch screen (or press ST/MO button on the remote) to select the MONO or STEREO mode .

()When Stereo mode is activated, the ST

symbol will appear .

Page 21

Radio Operation

To tune in strong-singnal FM Station only (LO/DX function)

Touch the LOC section on the

LOC

touch screen (or press LO/DX button on the remote) to select the LOCAL or DX mode .

()You can choose between the LOCAL

and DX(DISTANCE) mode for local or

long-distance traffic news .

Storing Stations In Memory

Setting Memory

Press the /CH 1-6 button repeatedly on the front panel to preset stations at radio mode . Or touch the screen the 1-6 sections()

BND

DISC

11: 08

FM1 106.30 MHz

LUD

4 5 6

POP

SWF

2 31 MOD

Touchtopresetstation

With this system, a total of 30 stations can be stored in the memory of six buttons. Each band stores up to six preset stations. The stations might be FM1, FM2, FM3, AM1(MW1), and AM2(MW2) band. The operation is as below :

-Store in Memory Touch and keep the 1-6 sections

(or press and hold the /CH 1-6) for

about 2 seconds, the current listening station will be stored into the number location .

-Retrieve a preset station Touch the 1-6 sections briefly (or press the /CH1-6 button repeatedly) to retrieve a station which had been stored in the memory in advance the chose number is shown on display .

Automatic Memory Storing & Program Scanning

Automatic Preset Setup

In Radio Mode, Touch and keep the

APS

APS section on the touch screen (or swing and hold the SEL knob in direction of the APS/DISP) for about

2 seconds to active automatic station storage. The radio searches within the current frequency band, e.g. FM1, for the stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set .

Scan Function

In Radio mode, briefly touch the

APS

APS section on the touch screen (or swing the SEL knob briefly in

the APS/DISP direction) , the radio briefly plays all the preset stations of the frequency band .

RDS FUNCTION

In Radio mode, touch it to select the desired item, it will display the

following as below :

DISC

DSP

11: 08

CLK

PTY

FM1 106.30 MHz

LUD

SWF

POP

LUD

TA AF

TA Traffic Annonuncement

(priority For Traffic Information)

In Radio mode, touch the TA

section briefly (or swing the SEL knob briefly in the TA/AF direction) ,

to activate the TA function. Touch it again to turn off the TA function .When the TA function is activated, the TA symbol appears in the display .

Page 22

Radio Operation

During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) .

If an FM station is being received which transmits the latest traffic announcements from time to time, the TP display lights up.

When the TA function is switched on , the FM traffic automatically interrupt CD operation(the word TRAFFIC appears in the display). The volume level is increased to the minimum value for the transmission of traffic announcements.

After the traffic announcements has

finished, the program that was previously running is resumed.

Interruption of the TA Function: if you would like to interrupt the current traffic announcement, touch the TA section on screen briefly . This does switch off the TA mode .

AF FUNCTION

(Alternative Frequencies)

In Radio mode, touch the AF

section briefly (or swing and hold the SEL knob in the TA/AF

direction) , to activate the AF function. Touch it again to turn off the AF function .

AF is a function that works with the help of RDS (Radio Data System) and can only be used with FM stations . The radio searches in the background for the best frequency reception of the station that has been tuned into .

Touch the AF section on touch screen or swing and keep the SEL knob in the TA/AF direction for about 2 seconds , the AF function is activated. The AF symbol appears in the display .

When the AF function has been switched on, the radio continuously tests the signal strength of the AF frequency . The test interval for each AF frequency depends on the signal strength of the current station and varies from a few

minutes in the case of weak signals.

Whenever the new AF frequency is stronger than the station that is currently tuned in , the radio switched to this frequency for a short time for a short time and the message “NEW FREQUENCY “ is displayed for one or two seconds.

Note :

the status of the AF function is shown by an AF symbol in the display.

If the AF symbol appears in the display, the AF function is switched on and RDS transmission date is being received . If the AF symbol flashes in the display, the AF function is selected but no RDS signal can be received at the moment .

PTY FUNCTION

In Radio mode, touch the PTY

PTY

section briefly (or press and hold the MU/PTY button on the front panel) , to select the Programme type .

PTY Selection of the programme type

besides the stations name, some FM stations also transmit information on the type of programme. This information can be displayed by your car radio .

Examples of such types of programme are :

SPORT NEWS POP WEATHER

With the PTY function you can specifically select stations transmitting a particular type of programme. Touch the PTY range on screen repeatedly to call up the PTY selection menu . The message “PTY SEEK” then appears briefly in the display .

when PTY has been selected the radio starts searching for corresponding PTY information and stops when the PTY information has been found, “NO PTY” appears in the display. If the PTY information being searched for no longer exists, the PTY function automatically switches to normal mode .

Page 23

DISC Operation

Basic Operation

During the DISC playback, use the finger touch the touch screen , it display will following as bellow :

DVD 11-0:44:36

1 32 4 5 6

1.Previous

2.Next

3.Pause

4.Stop

5.Mute

6.Mode

LUD

7.To next page

8.Insert or Eject the disc.

9.Volume+(adjustment+)

10.Select

11.Volume-(adjustment-)

12.Change the Angle of unit.

SWF

SEL VOL+VOL-

1011

POP

DISC

8 7912

11: 08

MOD

DVD 11-0:44:36

LUD

SUBTITLE AUDIO

GOTO

Touch it to select the other item .

SWF

POP

TITLE

DISC

11: 08

SET

DVD 11-0:44:36

ENT

Above these operation buttons for DVD setup.

Touch itfor previous .

Touch it to select the other item, it will display the following as below: (when the parking brake is applied)

DVD 11-0:44:36

LUD

SWF LUD AFDSP CLK TA

RDM INT RPT

Touch it to select the other item .

SWF

POP

OSD

DISC

11: 08

DVD 11-0:44:36

LUD

SWF

SEL VOL+VOL-

POP

DISC

MOD

11: 08

Page 24

DISC Operation

Switching the DVD mode

Touch the MOD section on the

MOD

touch screen (or press MOD button ) to select the DISC mode, it display like following :

DVD 11-0:44:36

LUD

Function setup

(different the source the display is different)

Stopping Play

Touch the screen the range (or

press the button on remote

control .) To stop the unit playback.

Touch the section or press

button on front panel to start play.

Pause (still picture)

Touch the “ ” section on touch screen during playback will stop play temporary, touch it again to return the normal playback .

SWF

SEL VOL+VOL-

POP

DISC

11: 08

MOD

Skipping Track

During DISC playback, Touch the

section on the touch screen to skip to next track. (You can also swing the SEL knob in direction to skip to next track.)

During DISC playback, Touch the

section on the touch screen to skip to back one track .( You can also swing the SEL knob in direction to back one track .)

Note :

1. In DVD mode, touch the section continually twice to back one track . (Swing the SEL knob in direction continually twice to back one track .)

2. For some VCD2.0 disc (PBC-playback control), above these buttons may be unavailable .

Zoom Function

Repeatedly touch the section of

ZOOM

the ZOOM, the displaying rate can be 1x, 2x, 3x, 1/2, 1/3, 1/4 .

Loud Function

Touch the LUD section on the

LUD

touch screen to switch the Lound ON or OFF.

Rapid Forward/Rapid Reverse

During DISC playback, Touch and hold (for about 2 seconds )the / section on the touch screen (or swing the SEL knob in / direction on front panel and hold for a more than 2 seconds) the speed of rapid forward/reverse changes according to the disc as follow:

DVD/VCD/CD/MP3:

Normal Playback 2x 4x 8x 16x

Mute Function

Use your finger touch the “ ” section , it will mute the sound but the disc continues playing. Touch it again to resume .

Subwoofer Function

Use your finger touch the SWF

SWF

section on the screen to turn on the Subwoofer function, touch it again to cancel function .

Page 25

DISC Operation

Selecting The Play Modes

During the Disc playback, touch the touch screen, it will display the following as below :

DVD 11-0:44:36

LUD

Touch the section to select .

DVD 11-0:44:36

LUD

SWF LUD AFDSP CLK TA

RDM INT RPT

1). Repeat Function

FOR DVD :

Touch the screen the RPT section

RPT

(or press longer RPT on remote control) to select REPEAT mode as follow :

CHAPTER REPEAT ON TITLE REPEATON

FOR VCD/CD/MP3 :

Touch the screen the RPT section

RPT

(or press longer RPT on remote control) to select REPEAT mode as follow :

REPEAT ONE REPEATALL

1. Continuously repeat at the current chapter/track, when selected REPONE mode .

2. Select REP-ALL mode to continuously repeat all chapter/track on the current disc .

POP

SWF

SEL VOL+VOL-

POP

SWF

REPEATALL

REPEAT OFF

OSD

DISC

11: 08

MOD

11: 08

2). RDM(RANDOM) Function

During DISC playback, Touch the

RDM

RDM section ( press the 4/RDM button longer on remote control

to play in random. Each playing, the order is different . (depend on the disc used for VCD). Touch it again to cancel this function .

3). INT Function

FOR CD :

Touch the screen the INT section

INT

(or long press the 3/INT button on the remote) to play the previous 6 seconds part of each track/chapter on disc.(touch it again to cancel)

FOR VCD :

Touch the screen the INT section

INT

(or long press the 3/INT button on the remote ).it display will following menu as below :

(touch it again to cancel this mode .)

SELECT DIGEST TYPE: TRACK DIGEST DISC INTERVAL TRACK INTERVAL

Use the UP, DOWN, LEFT and RIGHT arrows on the remote to select the item, and then press ENTER to confirm .

FOR DVD :

Touch the screen the INT section

INT

(or long press the 3/INT button on the remote ). it display will following menu as below :

(touch it again to cancel this mode .)

SELECT DIGEST TYPE: TITLE DIGEST CHAPTER DIGEST TITLE INTERVAL CHAPTER INTERVAL

Use the UP, DOWN, LEFT and RIGHT arrows on the remote to select the item, and then press ENTER to confirm .

NOTE :

The 3/INT button is not available.

Page 26

DISC Operation

DISC Search (GOTO)

DVD 11-0:44:36

SWF

SUBTITLE AUDIO

GOTO

Touch theGOTO section , itdisplay will following as below :

Title 01 /01, Chapter --/15

FOR DVD :

Touch the screen the GOTO range

GOTO

(or press GOTO on the remote ). Twice, the screen will display the following message :

Title 01/01 Time -:--:--

0:10:36

You can select the item you want to watch through TIME setting by using numberic buttons . (E.x. 0:10:36)

FOR VCD (With PBC OFF):

DISC

TITLE

11:0 8

SET

321

+10

POP

Note:

Touch and hold the / section on

the touch screen , you can select the title or chapter of DVD . (Only for the DVD with title /chapter.)

AUX Operation

To connect analogue replay devices. Use this jack to replay sound of other replay equipment such as DVD players, computers, etc. Via the loudspeakers.

AUXIN

AUX Socket

1). Please connect the external device with stereo jack plug the Aux in socket .

2). Touch the MOD section on screen or press the MOD button to select the AUX IN connection. It will display the following as below :

DVD 11-0:44:36

LUD

SWF

SEL VOL+VOL-

POP

DISC

11: 08

MOD

Touch the screen the GOTO range

GOTO

(or press GOTO on the remote ). Once, the screen will display the following message :

Disc Go To --:--

00:36

Use the numberic buttons to input the time directly (E.x. : 00:36)

Touch to select

3). You now hear the sound from the external device played back through the loudspeakers .

4). Touch the volume+/- sections on touch screen or rotate the VOL+/- on the remote to adjust the volume level.

Page 27

DISC Operation

ON-SCREEN DISPLAY FUNCTION

During playback, touch the screen

OSD

the OSD section (or press the OSD on the remote), it will display the following as below :

1. DVD: A.Touch or Press for first time:OSD

TITLE ELAPSED

T 01/01 C 01/38 0:02:06

Title Number, Total Title Number, Chapter Number, Total Chapter Number of this Title of the disc currently being played will be shown on the screen, along with the elapsed time.

B.Touch or Press for second time:OSD

TITLE REMAIN

T 01/01 C 01/38 3:24:36

2.Example for VCD/SVCD/CD: A.Touch or Press for first time:OSD

SINGLE ELAPSED

TRACK 01/16 0:00:56

B.Touch or Press for second time:OSD

SINGLE REMAIN

TRACK 01/16 0:05:10

C.Touch or Press for hird time:OSD

TOTALELAPSED

TRACK 01/16 0:31:36

D.Touch or Press for fourth time:OSD

TOTALREMAIN

TRACK 01/16 0:36:26

C.Touch or Press for hird time:OSD

CHAPTER ELAPSED

T 01/01 C 01/38 0:02:56

D.Touch or Press for fourth time:OSD

CHAPTER REMAIN

T 01/01 C 01/38 0:04:32

E. Touch or Press for fifth time:

OSD

The message on the screen will be cleared.

E.Touch or Press for the fifth time:

OSD

The message on the screen will be cleared for SVCD and VCD.

NOTE:

For CD and MP3,the message will always display on the screen.

3.Example for MP3: Each time is pressed or touch , the

OSD

message displayed on screen changes as follows:

SINGLE ELAPSED SINGLE REMAIN

Page 28

DISC Special Functions

DVD/VCD Special Function

DVD 11-0:44:36

SWF

POP

DISC

11:0 8

SUBTITLE AUDIO

GOTO

1. Multi-subtitle Language Function (for DVD Only)

SUBTITLE

on the remote) . Each time the button is pressed or touch, number of the subtitle language changes in sequential order.

Notes:

- The language number is different according to the disc.

- Some discs only contain one subtitle language.

- When no different subtitle language are recorded, will be displayed at screen left top corner.

During DVD playback. Touch the SUBTITLE section on touch screen(or press the SUBTITLE

2. Multi-Audio Language Function

AUDIO

For DVD:

During DVD playback , touch the AUDIO section on touch screen (or press the AUDIO

on the remote .) Each time the button is pressed or touch , number of the audio soundtrack language changes on sequential order.

Notes:

- The language number is different

according to the disc.

- Some disc only contain one language

soundtrack

- When no different language

soundtrack are recorded will be display at screen left top corner.

SET

TITLE

For VCD/CD:

during playback, touch the

AUDIO

section of the touch screen or Press

AUDIO

on the remote . It is possible to switch the sound between monaural and stereo sound.

MONO LEFT MONO RIGHT

STEREO

MIX-MONO

3. Multi-Angle Function (for DVD Only)

During DVD playback, touch the

section or Press ANGLE button on the remote . Each time the button is pressed or touch,number

of the angle changes in sequential order.

Notes:

- The angle number is different according to the disc.

- The function only work for disc having scenes recorded at different angles.

- When no different angle are recorded,

will be displayed at screen left top

corner.

4. Title Menu Function

For DVD:

TITLE

If the DVD has multiple titles recorded on the disc. It can select preferred title from the title menu to start playback.

- During DVD playback, Touch the section or press TITLE button on the remote .The title menu is display.

- touch the cursor button shown in TV screen, select preferred title by the cursor button and confirmed by touch ENT button .

ENT

Touch to select

For VCD:

TITLE/PBCPress button on the remote

control while the disc is playing, you can switch between "PBC on"and "PBC off" mode.

TITLE

Page 29

Setup

USING THE MENU

DOLBY

....GENERAL SETUP PAGE....

TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memory

Go To General Setup Page

1. Touch the section of DVD setup

SET

LB ON ENG SPDIF/RAW ON ON ON

on touch screen (or press the SETUP on the remote .)

2.The SETUP menu is displayed.

3.Select the preferred item by touch the / / / range on the screen

or by using the / / / buttons .

4.Touch the ENT section on screen or

Press ENTER button on remote to confirm .

The Following Buttons For Entering The Selection .

ENT

Enter

Down Left

Right

The buttons of the left and right are for selection of setting type . The buttons of the up and down are for selection of the setting program .

Touchto select

Overview Of The Main Menu

DOLBY

()1 ()2 ()3 ()4

(1).General Settings (2).Speaker Settings (3).DOLBY Digital Settings (4).Preference Settings

GENERAL SETUP

TV Setting

DOLBY

....GENERAL SETUP PAGE....

TV Display

TV Display Angle Mark

OSD Lang Spdif Output Captions Screen Saver Last Memory

Set TV Display Mode

16:9

4:3 Pan Scan

1.TV DISPLAY SETUP

This is to select the appropriate TV aspect (4:3 or 16:9) according to the connected TV set.

Normal/PS (For 4:3 TV)

Played back in the PAN & SCAN style. (If connected to wide-screen TV, the left and right edges are cut off.)

Normal/LB (For 4:3 TV)

Played back in LETTER BOX style. (If connected to wide-screen TV, black bands appear at top and bottom of the screen.)

Wide (For 16:9 TV)

Select when a wide-screen TV set is connected.

Normal/PS Normal/LB

Normal/LB Wide

4:3LetterBox

Page 30

Setup

GENERAL SETUP

DOLBY

....GENERAL SETUP PAGE....

TV Display

Angle Mark

Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memory

Set Angle Mark

ON OFF

2.ANGLE MARK DISPLAY SETUP

If it is set to ON, when the multi-angle DVD disc is playing, (the angle mark) will appears on the screen; if is

....GENERAL SETUP PAGE....

TV Display Angle Mark

OSD Lang

OSD Lang Spdif Output

Spdif Output Captions Screen Saver Last Memory

Setup SPDIF

4.SPDIF OUTPUT

This is to activate the audio output from SPDIF OFF mode to SPDIF/RAW mode to SPDIF/PCM mode.

set to OFF, the mark will not appear.

LANGUAGE DISPLAYING SUBTITLES HIDING

DOLBY

....GENERAL SETUP PAGE....

TV Display

English

Angle Mark OSD Lang

OSD Lang

OSD Lang Spdif Output Captions Screen Saver Last Memory

English French German Spanish Italian Portuguese

....GENERAL SETUP PAGE....

TV Display Angle Mark OSD Lang Spdif Output

Captions

Captions Screen Saver Last Memory

SPDIF OFF

SPDIF/OFF SPDIF/RAW SPDIF/PCM

DOLBY

ON OFF

Set OSD language

3.OSD LANG TYPE SETUP

Touch the / section on the touch screen or press the / button on the remote to select the preferred OSD language , then touch the ENT section to confirm .

Closed Caption

5.CAPTIONS SETUP

Activate the CAPTIONS feature by selecting ON. And release this feature by selecting OFF.

Page 31

Setup

GENERAL SETUP

DOLBY

....GENERAL SETUP PAGE....

TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver

Screen Saver Last Memory

Screen Saver

6.SCR SAVER SETUP

Select the SCR SAVER output ON/OFF.

DOLBY

ON OFF

SPEAKER SETUP

.....Speaker Setup Page.....

DOLBY

....Speaker Setup Page....

DOWNMIX

Set Downmix Mode

LT/RT STEREO

STEREO

This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Select the preferred SPEAKER connection by using the cursor buttons. Select the LT/RT to activate the Dolby surround compatible output. Select the STEREO to activate simple stereo mode.

DOLBY DIGITAL SETUP

DOLBY

....GENERAL SETUP PAGE....

TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Last Memory

Last Memory

Set Last Memory State

ON OFF

7.LAST MEMORY SETUP

Select the LAST MEMORY output ON/OFF.

....DOLBY Digital Setup....

DOWNMIXDYNAMIC

Set DRC OFF

DYNAMIC RANGE CONTROL

Select DRC and adjust the dynamic range of a Doby Digital encoded program. There are 8 steps between full compression and off compression.

FULL

6/8

4/8

2/8

OFF

Page 32

Setup

--- PREFERENCES PAGE ---

DOLBY

....Preference Page....

TV Type

TV Type Audio

OSD Lang

Subtitle Disc Menu Parental Password Default

Set TV Standard

PAL AUTO

NTSC

1.TV TYPE SETUP

This player can play discs recorded in either PAL or NTSC format.Select NTSC format, when you connected to NTSC TV.Select PAL format, when you connected to PAL TV.Select AUTO format, the player TV output format will according to the DVD disc format..

DOLBY

....Preference Page....

TV Type Audio

Audio

OSD Lang

Subtitle Disc Menu Parental Password Default

Preferred Audio Language

English

English French German Spanish Italian Portuguese

DOLBY

....Preference Page....

TV Type Audio

OSD Lang

Subtitle

Subtitle Disc Menu Parental Password Default

Preferred Subtitle Language

English French German Spanish Italian Portuguese Off

Off

3.SUBTITLE LANGUAGE SETUP

Select the preferred SUBTITLE language by using the cursor buttons.

DOLBY

....Preference Page....

TV Type

English

Audio

OSD Lang

Subtitle Disc Menu

Disc Menu Parental Password Default

Preferred Menu Language

English French German Spanish Italian Portuguese

2.AUDIO LANGUAGE SETUP

Select the preferred AUDIO soundtrack by using the cursor buttons.

4.DISC MENU LANGUAGE SETUP

Select the preferred DISC MENU language by using the cursor buttons.

Page 33

Setup

--- PREFERENCES PAGE ---

Age control

DOLBY

....Preference Page....

TV Type Audio

OSD Lang

Subtitle Disc Menu Parental

Parental Password Default

4PG13 5PGR 6R 7NC 17 8ADULT

8ADULT OFF

Set Parental Control

5.PARENTAL

Select suitable parental guidance by the cursor buttons and conformed by pressing ENTER button.

DOLBY

....Preference Page....

TV Type Audio

OSD Lang

Subtitle Disc Menu Parental Password

Password Default

Changed Password

CHANGE

6.PASSWORD

Select the change and press ENTER button. Type the old password (The initial factory code is ) and key in 4 characters password now you want to use, and retype again to confirm key in correctly.

1379

....Preference Page....

TV Type Audio

OSD Lang

Subtitle Disc Menu Parental Password

RESET

Default

RESET

Load Factory Setting

7.DEFAULTS

Select reset to become factory initial setting.

DEFAULTS TABLE

GENERAL SETUP

SPEAKER SETUP

DOLBY DIGITAL

PREFERENCES

TV DISPLAY

ANGLE MARK

OSD LANGUAGE

SPDIF OUPUT

CAPTIONS

SCR SAVER

LAST MEMORY

DOWNMIX

DYNAMIC

TV TYPE

AUDIO

SUBTITLE

DISC MENU

PARENTAL

PASSWORD

NORMAL/LB

ENGLISH

SPDIF/RAM

STEREO

OFF

AUTO

ENGLISH

OFF

ENGLISH

8 ADULT

1379

Page 34

Other Main Operation

USB Operation (17)

Following the diagram below, connect your USB device to the front panel USB port . If it is properly connected, the device will be mounted and start playing automatically.

USB port

(USB connect line)

you can also select the desired item of the USB device The buttons on the remote control, on the device, have the same functions as the touch buttons of this touch screen have .

In USB Playback mode

Use the UP, DOWN, RIGHT or LEFT buttons to navigate to and select files to play, and press ENTER to begin playback (or viewing, in the case of JPEG files). To skip to the next or last track, touch or press the or . Press the or buttons for Fast Forward or Fast Reverse playback.

REPEAT

by repeatedly pushing until the desired mode is found.

Changing From USB to DISC Playback Modes

If you are in USB Playback mode and wish to begin playback of a disc already in the player, touch the range on the touch screen or press the STOP on the remote once. Then touch GOTO range on the screen or press the GOTO on the remote and the player will switch to DVD/VCD/CD/MP3 Playback mode.

Changing From DISC to USB Playback Modes

If the disc present in the player is an MP3 disc, touch section on screen or press the STOP on remote once then touchorpresstheGOTOtoUSB playback.

play modes are also available

REPEAT

If the disc present in the player is an DVD or VCD or CD disc, touch on the screen or press STOP twice on the remote then touch GOTO section on the screen or press the GOTO button on the remote to USB playback.

Important Note:

To prevent damage to the USB device, do not remove or disconnect it during playback. it is also a good practice to remove the USB drive during disc playback.

TV Operation

Switching to TV mode

1.Connect the TV antenna to the TV.IN (from Ant) jack on the back of the unit.

2.Touch the MOD section on the

MOD

touch screen (or press the mode button on the remote to select the TV mode.

The message will display in the monitor

as follow :

TV 001

LUD

SEL

VOL-

Touch it to select the other item .

TV 001

LUD

SWF

FINE+

Touch it to select the other item .

SWF

VOL+

SWF

DSP

POP

TA AF

POP

CLK

FINE-

DISC

11: 08

MODSKIP

11: 08

Page 35

Other Main Operation

TV 001

LUD

Touch itfor previous .

TV 001

LUD

SEL

VOL-

SWF

VOL+

POP

321

POP

TA AF

DISC

11: 08

SKIP

11: 08

MODSKIP

- The numeric button (0-9) allow you to select the corresponding channel directly.

Note:

In TV mode, the +10 button is not available.

Fine Tuning

FINE+

Touch the “fine+/fine- ” section on the touch screen (or press /

FINE-

button on the remote) to fine tune the current channel .

Channel ADD/DEL

In TV mode ,after search channel

SKIP

automatically, when you want delete the no sign channel, touch the SKIP

section on the touch screen (or press the SKIP button on the remote ,the screen display SKIP),the channel will be deleted. Also, you can touch or press numeric button to select channel, then press SKIP to add channel (the screen display SAVE).

Auto searching TV channels

Touch the “search” section on the

touch screen (or press the Search button on the remote to star search channel automatically.

It will display the following as below:

TV 036

PAL-BG

AUTO SCAN

UHF

Selecting channel

Touch “ ” section on screen (or Press the “ ” button on remote) to choose the channel upward

Touch “ ” section on screen (or Press the “ ” button on remote) to choose the channel downward

Dub system

PAL system contain PAL(DK, I, BG, MN) dub tone functions, and for SECAM system is with SECAM DK dub tone functions . Those dub tone function is unavailable when it is in NTSC system .

Briefly Touch the SEL section on touch screen (or press SEL knob on panel) to select the TV standard by repeatedly touch SEL section. If you are in European Frequency, you can use the VOL+/- to select among of the “PAL-BG, PAL-DK, PAL-I, PAL-MN” . It will display following as below :

TV 001

LUD

SEL

VOL-

Touch toselect

Touch toadjust

SWF

VOL+

POP

TA AF

DISC

11: 08

MODSKIP

Page 36

Other Main Operation

MP3/WMA/JPEG/MPEG4 DISC PLAY

1.When inserting an MP3/WMA/JPEG/MPEG4 disc. Ex: When MP3 file is detected.

003/112

Mp3

..............

00:56 04:07

woman

new

ton

Repeat one

Touch the screen, it will display the following as below :

when the parking brake is applied .()

.Current track(file)(highlighted bar) .Current track (file) number/total

number of tracks(files) in the current folder.

.Elapsed playing time of the current

track(

not available for JPEG disc)

.total playing time.

( not available for

JPEG disc)

.Operation mode icon. (Play),

(stop), (pause), (forward) (reverse).

.Selected playback mode

MP3 10-0:44:36

LUD

SWF

SEL VOL+VOL-

POP

DISC

11: 08

MOD

Touch repeatedly

MP3 01-0:44:36

ENT

Touch the / / / sections on touch screen (or Use / / / on remote control ) to select the item or folder, then touch the ENT section (or press ENTER button on remote) to confirm.

Touch the RPT on the touch screen (or Pressing REPEAT button on the remote) repeatedly can select two kinds of repeat play mode.

REP-ONE:

Play the same song over and over again.

REP ALL:

Play all songs in the discover and over again. In the playback, touch the or section to skip an item ahead or back. In the playback, touch and hold the / sections on touch screen for about 2 seconds to rapid forward/reverse .

(You can also swing the SEL knob in the direction of / button on the front panel and keep more than 2 seconds or short press on the remote control

to rapid forward/reverse.)

Page 37

Specification

Supply Voltage: 12V DC (11V-15V) Current Consumption: Less than10 A Signal System: Compositive video 1.0Vp-p 75 Discs Played: (1)DVD-VIDEO Disc

5"(12 cm) single-sided, single-layer 5"(12 cm) single-sided, double-layer

(2)Compact Disc (CD-DA, VIDEO CD)

5"(12cm) disc

Audio Signal Output: 2ch&4ch line out Characteristics: (1)Frequency Response 20 Hz - 20 KHz

(2)S/N Ratio 90 dB (JIS) (3)Wow and Flutter Below measurable limits

RADIO Section: For 3 Bands For 2 Bands For 2 Bands

(Europe) (Europe) (U.S.A.)

FM FM FM Frequency Coverage: 87.5 to108 MHz 87.5 to108 MHz 87.5 to107.9 MHz IF: 10.7 MHz 10.7 MHz 10.7 MHz Sensitivity (S/N = 30 dB): 15 dBu 15 dBu 15dBu

MW MW AM Frequency Coverage: 522 to1620 KHz 522 to1620 KHz 530 to1710 KHz IF: 450 KHz 450 KHz 450 KHz Sensitivity (S/N = 20 dB): 40 dBu 40 dBu 40 dBu

LW(Optional) Frequency Coverage: 144 to290 KHz IF: 450 KHz Sensitivity (S/N = 20 dB): 45 dBu

TV Section :

TV System: NTSC/PAL

TV Sensitivity:

TFT Monitor:

Monitor Screen Size: 4.3 Inch Wide Number of Pixels: 1152 X 234 pixels Color System: NTSC/PAL

NOTE: Specifications and design are subject to modification, without notice,

due to improvements in technology.

Page 38

Trouble Shooting

Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer.

SYMPTOM POSSIBLE CAUSE SOLUTION

If the power supply is properly connected to the car accessory terminal,switch the ignition key

"ACC".

Replace the fuse.

Remove the disc before putting in another.

Insert the disc with the label facing upward.

Clean the disc or try to play a new one.

Permit the vehicle interior to cool down before using the player.

Be sure the proper TV system settings are selected and color adjustments are appropriate.

Properly connect the parking brake wire to the unit.

For safety reasons no television or video images are displayed while the vehicle is moving. Engaging the parking brake will enable images to be displayed.

Check and make sure the disc format and TV format are the same.

Use a disc with JPEG files.

Re-record the disc in a compliant application. You may need to read the instructions for your disc recording software.

Remove and re-insert the front panel, making sure it is properly seated. Clean the connector on the back of the rear panel with a clean cotton swab and isopropyl (rubbing) alcohol. If the above does not resolve the problem, press the RESET button.

Select a station manually

Insert the antenna cable firmly

No power

Disc can not be loaded or ejected

The screen image is black and white when you expect color.

No screen image appears.

The picture color is poor or faint.

JPEG disc can not be played back.

Buttons and/or display do not work properly, or not at all.

The radio does not work.

The car ignition switch is

not on.

The fuse is blown.

There is already a disc in the player.

The disc has been inserted upside down.

Be sure to insert discs label side UP.

Temperature inside the car is too high.

The color system is set incorrectly.

The unit is not connected to the parking brake detection switch.

The parking brake is not engaged.

The disc format and the TV formats are mismatched (conflict of NTSC and PAL).

No JPEG files are recorded on the disc.

JPEG files are not recorded in a compliant formant.

The built-in microcomputer is not operating properly due to noise.

The antenna cable is not connected.

The signals are too weak.