Boss BV7345 User Manual

To ensure safety while driving

and to comply with laws,

drivers should not watch video or

operate the video device while driving.

Content

-1-

Safety Information.........................

Disc Note.......................................

Installation ....................................

Detaching control panel....................

Attaching control panel.....................

Electric Connection ......................

Remote Control .............................

Basic Operation.............................

Control Panel ................................

Setup Operation............................

Setting animation...........................

Setting disc....................................

Setting radio...................................

Setting wallpaper............ ................

Version about..................................

Setting time.......... .........................

Setting audio mode.........................

Setting video mode.........................

Setting OSD language....................

Setting illumination color.................

Reset Factory Settings ...................

Rear View Camera ........................

Radio Operation............................

Listening to radio.............................

Storing stations in memory ..............

Automatic Memory Storing &

Program Scanning......................

RDS function..................................

19

19

19

20

20

20

20

20

21

22

23

24

25

26

27

2

3

4

5

6

7

8

11

11

13

13

13

14

14

14

14

14

15

15

15

15

15

16

16

16

17

17

Media Operation............................

Selecting Play Mode........................

On-Screen Display Function............

Digital Video Special Function......

Multi-subtitle language function.......

Multi-audio language function..........

Multi-angle function.........................

Title menu function ..........................

AUX/AV Operation..........................

USB Operation...............................

Card Operation..............................

MP3/WMA/JPEG/MPEG4 Play .........

SWC Operation..............................

Specification..................................

Troubleshooting.............................

SAFETY INFORMATION

-2-

CAUTION:

THIS DIGITAL VIDEO PLAYER IS A CLASS I LASER PRODUCT. HOWEVER

THIS DIGITAL VIDEO PLAYER USES A VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE .

HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE
THE DIGITAL VIDEO PLAYER CORRECTLY AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT
REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.

THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.

This product incorporates copyright protection technology that is protected
by method claims of certain U.S. Patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners.Use of this
copyright protection technology must be authorized by Macro vision Corporation,
and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.

REGION MANAGEMENT INFORMATION:

This Digital Video Player is designed and manufactured to respond to the Region
Management Information that is recorded on a Digital Video disc. If the Region

number described on the Digital Video disc does not correspond to the Region
number of this Digital Video Player, this Digital Video Player cannot play this disc.

DISC NOTE

Preparing New Discs with Rough
Spots

A new di s c m ay hav e r ough ed g es on
its i nsid e a nd outs i de edg e s.If a di s c
with ro ugh edg es is used , t he prop er
setting will n o t b e p erfo rmed an d t h e
player will no t play t h e disc.Therefore,
remove the rou gh e dg es i n ad va nc e
by using a ball point pen or pencil as
shown on the right.To re m ov e th e
rough edges, press the s id e of t he pen
or pencil against the inside and outside
edges of the disc.

Rough s po ts
on
outsi de e dge

Ball po in t pen
or penc il

Rough s po ts
on insi de
edge

Label si de
up

Do not tou ch
the
unders id e
of the dis c

Do not
bend

Wipe the disc fr om
cent er
toward t he o ut si de
edge

Disc Cleaning

Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl
(rubbing) alcohol. Never use solvents
such as benzine, thinner or conventional
record cleaners as they may mar the
surface of the disc.

Handling and Cleaning

Dirt, dust, scratches and warping disc
will cause misoperation.
Do not place stickers or make
scratches on discs.
Do not warp discs.
A disc should always be kept in its
case when not in use to prevent from
damaging.
Do not place discs in the following
places:

1.Direct sunlight

2.Dirty, dusty and damp areas

3.Near car heaters

4.On the seats or dashboard

Discs which cannot be played
with this player

Digital Video-RAM
CDV
CD-G

Note:

A disc may become somewhat scratched

(although not enough to make it unus­able) depending on your handling it and
conditions in the usage environment.

Note these scratches are not an indica­tion of any problem with the player.

-3-

Disc formats supported by this
player

Digital
Video

VCD

CD

MP3

Audio a nd Video
Disc si ze 12 cm

Audio a nd Video
Disc si ze 12 cm

Audio
Disc si ze 12 cm

Audio
Disc si ze 12 cm

NOTES:

Choose the mounting location where the
unit will not interfere with the normal
driving function of the driver.

Before finally installing the unit, connect
the wiring temporarily and make sure it
is all connected up properly and the unit
and the system work properly.
Use only the parts included with the unit
to ensure proper installation. The use of
unauthorized parts can cause
malfunctions.

Consult with your nearest dealer if insta­llation requires the drilling of holes or
other modifications of the vehicle.

Install the unit where it does not get in
the driver s way and cannot injure the
passenger if there is a sudden stop,
like an emergency stop.

'

30

INSTALLATION

-4-

If installation angle exceeds 30 from
horizontal, the unit might not give its
optimum performance.

Avoid installing the unit where it would
be subject to high temperature, such
as from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.

DIN FRONT/REAR-MOUNT

This unit can be properly installed either
from "Front"(conventional DIN Front­mount) or "Rear"(DIN Rear-mount
installation, utilizing threaded screw
holes at the sides of the unit chassis).
For details, refer to the following
illustrated installation methods.

DASH BOARD

METAL MOUNT ING
STRAP

HEX NUT

SPRING WASHER

PLAIN WASHER

TAPPI NG SCREW

CONSOLE

SLIDE BRAC KET
HOUSING

HEX BOLT

INSTALLATION

-5-

DETACHING CONTROL PANEL

1. Press the OPEN button to flip down the
front panel .

2. First slide the front panel a little to
the right, and pull it off towards you .

OPEN button

3. put it in the protective case for safe
keeping.

PROTECTIVE CASE

FRONT PANEL

KEY PLATE

PLASTIC FRAME

KEY PLATE

If you want to take CHASSIS out of the SLIDE BRACKET HOUSING , first remove
the PLASTIC FRAME of the both sides away, then insert the two KEY PLATES into
left and right sides of chassis as above illustration.

INSTALLATION

-6-

How to clean the connectors

Frequent detachment will deteriorate
the connectors.
To minimize this possibility, periodically
wipe the connectors with a clean, soft,
dry cloth only, being careful not to
damage the connectors.

Connector

ATTACHING CONTROL PANEL

1. First, insert the right side of the front
panel into the main unit.

Bulg e

Holl ow

Bulg e

Holl ow

3. Push it back to the position for playing

2. Push the right side of the front panel
until it locks firmly into the main unit, at
one time, insert the left side of the
front panel into the main unit .

-7-

ELECTRIC CONNECTION

RADIO ANTENNA JACK

WIR E C O NNECTION

FRONT RCA AUDIO OUT SOCKET

FRONT RCA AUDIO OUT SOCKET

VIDEO OUTPUT SOCKET

VIDEO OUTPUT SOCKET

RCH IN RED

RCH RED

LCH IN WHITE

LCH WHITE

VIDEO IN YE LL OW

AV IN

REAR RCA
OUTPUT

VIOLET/WHITE

(B+)12V
REAR CAMERA SWITCH

(B-)PARKING BRAKE

GREY

GREY/BLACK

FRONT
RCH SPK.

VIOLET

VIOLET/BLACK

WHITE

WHITE/B LA CK

GREEN

GREEN/B LA CK

REAR

LCH SPK.

AUTO ANT ENNA

BLUE

GROUND(B-)

MEMORY BACK -UP(B+)

IGNITION SWI TCH(B+)

RED

YELLOW

BLACK

REAR
RCH SPK.

FRONT

LCH SPK.

LIGHT GREEN

FUSE

FUSE

KEY GR OUND(BLACK)
KEY 1( BROWN)
KEY 2( WHITE)

ISO C ONNEC TOR

SUBWOOFER GR EY

REAR CAMERA INPUT YE LLO W

White Yellow

Yellow

Red

Note:

the ground connection cable (parking brake B-) must be connected in order for
pictures to be played back to the monitor. If the cable has not been correctly
connected, appears on the monitor. warning message

REMOTE CONTROL

-8-

1. CLK Press it briefly to show the clock
time .

2. SRC Press it to change between

RADIO ,DISC ,USB, SD , AUX IN and
AV IN mode.

3. STOP Press once to pause playback,
press PLAY/PAUSE to resume playback .

4. SETUP Press it to open the SETUP
menu.

5.MO/ST(AUDIO) In radio mode, press it
to select STEREO or MONO mode (when
a station is weak, sometimes switching
to Mono will improve sound quality ) .
In Disc playback mode, pressing it button
opens the AUDIO setup menu for making
changes to the way te soundtrack is
reproduced .

in video play mode

6. LO/DX(SUBTITLE) Changing of the
SUBTITLE language on multi-subtitle
language Digital Video disc. In radio mode,
Press this button for distance reception
when you are located at weak signal
location, depress it for stronger signal.

7. REPEAT/ Switch the Repeat mode

of DVD/VCD/CD/MP3 disc.

8.GOTO

Press this button to begin
playback at a moment in the program you
designate. Use the number buttons to
enter the data that is needed.

15

17

19

13

14

7

2

6

22

11

18

3

16

5

20

1

21

24

9

12

10

4

8

26

23

25

REMOTE CONTROL

-9-

9. / Press to skip to the next
track & press to skip back one track.

switch
between BASS,TREBLE,BALANCE,
FADE,COLOR, RIGHTNESS,
CONTRAST, TINT, REG(in radio mode),
PI(in radio mode),TA(in radio mode),
AF(in radio mode), LOUD, SWF, EQ,
TIME 12H/24H, CLOCK, BEEP,
EUR/USA FREQ, ANIMATION.

After switching on the desired mode
above, rotate VOL knob to set it.

11. VOL+/VOL- Press it to adjust
volume level .

12. / / / Use these buttons to
navigate the various menus present in
the product.

13. MENU/SUB WOOFER Press to
display the root menu of the Digital Video
disc. switch

SWF FREQ between 80HZ, 120HZ and 160HZ

14. BAND(OSD) In Radio mode, press
this button repeatedly to switch between
the five radio bands .
In Disc Playback modes, Press this
button to see information about the disc
currently in play.

15. /MOD Press this button to turn the
unit ON , press and hold to turn the unit
OFF. Press it briefly to select

16. PLAY/PAUSE ( ) In DISC mode,
starting playback, stopping picture/track.

17. MUTE Press this button to turn off the
audio. Press again to restore the sound
to its prior volume level.

18. TITLE/PBC (A/PS) Display the
TITLE menu which is recorded on the

. changing between PBC
ON and PBC OFF on the VCD disc.
In radio mode, press shortly to scan the
preset station, press longer to enter into
automatic memory storing function .

10. Press and hold to

Press and hold this button to

.

a desired

work source.

Digital Video

SEL

19. ZOOM Press this button to active

the ZOOM function . Each press of the
zoom button changes the screen in the
sequence : 2x 3x 4x ½ 1/3 1/4 .
Use the / / / buttons to move
through the zoomed picture .
Note : during the JPEG playback, press
the ZOOM button, the “ZOOM 100%” will
appear on screen, then press the /
button to increase/decrease in size,
use the / / / buttons to move
through the zoomed picture .

20. ANGLE Changing of the view angle
on multi-angle Digital Video disc.

21. EQ/LOUD Press it briefly to turn to
equalization function. Press it longer to
switch the LOUDNESS function between

LOW, MIDDLE, HIGH and OFF.

22. /

In DISC mode, Press to start forward
rapidly. Press to reverse rapidly.

23. ENTER Confirm the Track/Chapter
selected with the number key or selected
with the cursor buttons on TV screen.

24. 0 - 9(0/TA & 9/AF)

25. +10 Tens digit select button,

cooperatively used with numeric buttons.

26. RADIO PRESET Six preset memory
buttons.

Use to input numerical values during
programming, with the GOTO button,
or to directly select a track to play .
In Radio mode, (when the RDS
engaged,), 0 serves as TA function,
9 serves as the AF function .

REMOTE CONTROL

-10-

Using the Remote Control

Face the remote control towards the player front face IR mark (remote control signal

receiver).

Operation angle: About 30 degree in each the direction of the front of the IR mark.

Preparing the Remote Control

1.First push to inside as the direction indicated by the arrow (See )And then

Remove the battery holder as the direction indicated by the arrow (See ).

2.Replace the battery Set a new battery property with (+)side up as illustrated

(See ).

3.Insert the battery holder. Push in the holder to the original position(See ).

1

2

3

4

Inserting the Battery

Note :

The lithium cell in the battery compartment of remote control has been secured for

transport with a plastic . Before initial use please remove this plastic so that the

remote control is ready for operation .

BASIC OPERATION

-11-

1. REL Button

Press it to flip down the front panel ,
then you can insert a disc into the disc
compartment. You can also press the
Eject button to eject the disc.

2018 19

2. (POWER On/Off)/SRC Button

Press it to switch the device ON, press
and hold (approximately 2 seconds) to
switch the device OFF . During the
playback mode, you can press it to select
an input mode by pressing repeatedly
until proper one is found:

>RADIO >DISC >USB > CARD >AUX IN
>AV IN

Control Panel

Control Panel

Base of Control Panel

3. VOL Multifunction Button

In normal mode, this button is used to
increase or decrease the volume.

4. utton

Press and hold to

SEL B

switch between

BASS,TREBLE,BALANCE, FADE,

COLOR, RIGHTNESS, CONTRAST,
TINT, REG(in radio mode), PI

(in radio mode),TA(in radio mode),
AF(in radio mode), LOUD, SWF, EQ,
TIME 12H/24H, CLOCK, BEEP,
EUR/USA FREQ, ANIMATION.

After switching on the desired mode

above, rotate VOL knob to set it.

1

17

15

13

16

3

6

9

11

10

8 12

4 14

7

5

2

BASIC OPERATION

-12-

5. BAND Button

In Radio mode, press this button repeat­edly (or the BAND button on the remote
control) to cycle through and select the
desired radio band, the designation of
the corresponding level- FM1, FM2,
FM3, AM1(MW1), AM2(MW2)- is shown
in the TFT.

6.MUTE/PTY Button

Press this button to turn off the audio.
Press again to restore the volume to the
prior level. You can also disable the
MUTE function by turning the VOL +/­knob.

TY

7/8.

In Radio Mode, press this button and
hold for a bout 2 seconds to select the
P of the grogram type (examples of
such types of program are :

NEWS, POP.....)

>>| and |<< Buttons

In radio mode, Long pressing |<< or >>|

button can automatically search down
or up for an available station beginning
from the current frequency; Briefly
pressing |<< or >>| button can manually
search down or up for a your desired
station beginning from the current

frequency.

In media mode, pressing |<< or >>|
button can play previous or next track;
continuously and long pressing |<< or
>>| button can fast backwards or

forwards at the following multiple of
normal speed: x2, x4, x8, x20.

9 4

15. AUX INPUT JACK

For information about using an AUX IN
audio source, refer to AUX operation.

17. USB PORT

For information about connecting a
USB device.

CARD SLOT

For information about connecting a
memory card device.

19

-1 . PRESET STATION MEMORY

In RADIO mode, Go to any preset station
by pressing one of the 6preset station
(1-6) ,if one of these buttons is pressed
for more than 2 seconds, the stations
currently being listened to will be

memorized into the selected preset button.

16. TFT Display (liquid crystal display)

The operation of the TFT, refer to TFT
Monitor Adjustment .

18.

. (EJECT) Button

In DISC playing ,Press the Open button
to flip down the front panel, then you
can press the this button to eject the disc .

20. RESET utton

Press this button to return to factory
settings.

In home interface, rotate the VOL knob
or press the </> button on remote to
do selection.
In SETUP or SWC mode, press and hold
the SEL button to back to previous mode;
In SETUP mode, press setup button to
back to home interface.
The other mode, press the SEL button
to back to home interface

BASIC OPERATION

-13-

SETUP OPERATION

ADJUSTABLE ITEMS:

10: 00 AM10: 00 AM

In home mode, rotate the VOL knob to
select “ ” and press SEL button or
press ENTER on remote to turn to

setting menu.
During setting ,use the VOL knob as turn
left and right and use the >>I and I<< as
turn up and down. You can also use the
directions button to do selection then
press SEL to confirm the input.

Setup interfa ce 1

Setup i nterface 2

ANIMATION

In RADIO mode, you can change the
playing time of animation among of
“OFF, 10S, 30S, 1M,90S, 2M, 3M and
4M ”.

Note:

Please set the playing time of the
animation to “ 10S ” for the first, when
you turn the unit on .

General setup i nte rfa ce1

GEN ERAL

ANI MATION 2 MI NUTE

KEY BE EP ON

DIS C ...DIS C ...

RAD IO ...

Disc setup as follow:

FORMAT

TV TYPE

This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.

Normal/PS (For 4:3 TV)

Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the
left and right edges are cut off.)

Normal/LB (For 4:3 TV)

Played back in LETTER BOX style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)

Wide (For 16:9 TV)

Select when a wide-screen TV set is
connected.

This player is capable of playing discs
recorded in either PAL or NTSC formats.
Make the selection based on whether
you are connecting the unit to a PAL TV
or an NTSC TV. You can also set the unit
to AUTO (auto select). The disadvantage
to autoselect is that each time you turn
the unit on it checks to see what kind of
monitor is connected, which causes a
small delay and some flickering of the
display image which you may find
unpleasant.

16:9

4:3 Letter B ox

4:3 Pan Scan

DIS C

FOR MAT NTSC

TV TY PE 4:3P S

RATIN G ADULT

KEY BEEP : ON or OFF.

BASIC OPERATION

-14-

RATING

Select to turn Parental Control on or off.

changes to the Parental Control
menu below .)
Key in “0000” and then turn to rating
then you can setting as follow:
KID SAFE -> G -> PG -> PG-13

-> PG R -> R ->NC-17 -> ADULT

RADIO

ST/MONO: To select stereo or mono.

LOCAL: To select local or distant.

REGION: To select radio frequency
as USA or EUROPE.

WALLPAPER

To select wallpaper .

ABOUT

To show the version information.

CLOCK SETUP

To adjust the time and time format.

The factory default password is 0000.
(The password must be used to make

General setup interface2

GEN ERAL

WALL PAPER .. .

ABO UT ...

clock setup interface

AUDIO SETUP

To turn to audio quality adjustment.

TREBLE: -7 to +7
To adjust treble level .

BASS: -7 to +7
To adjust bass level .

SUBWOOFER: To adjust subwoofer
volume and frequency.

EQ: To select audio mode as follow:

USER -> JAZZ -> CLASSIC -> POP -> ROCK

LOUDNESS: To to select loudness
effect as :OFF -> LOW -> MID -> HIGH

FADER/BALANCE:
BALANCE: R 0-10 to L 0-10

Adjust sound balance between left
and right speakers .

FADE: F 0-10 to R 0-10
Adjust sound balance between front
and rear speakers .

audio setup interface2

audio setup interface1

VIDEO SETUP

COLOR: -16 to 16

Adjust the color for the picture-lighter
or darker.

BRIGHTNESS: -16 to 16

Adjust if the picture is too bright or
too dark.

CONTRAST: -16 to 16

Adjust the contrast of the bright and
dark portion.

TINT: -16 to 16

Adjust the tint if the human skin color
is unnatural.

-Adjustable when “NTSC “ is selected
for “NTSC/PAL “ .

LANGUAGE

To select OSD language.

ILLUMINATION COLOR

Rotate the VOL knob to select the
backlight for all buttons.
Rotate the VOL knob till the end to
select auto icon then tap ENTER to
confirm, and the back light change
automatically.

BASIC OPERATION

-15-

Video setup interface

The RESET button is to be activated for
the following reasons:
A. Initial installation of the unit when
all wiring is completed.
B. All the function buttons do not operate.
C. Error symbol on the display.

Rear View Camera

When connecting the rear view camera
the mirror image of the rear view is auto­matically displayed on the monitor
when you change the gear to the back
position.
(Note: additional monitor can not display
the image.)

Reset Factory Settings

RESET button is placed on the housing
and must be activated with either a
ballpoint pen or thin metal object.

RE S ET

BASIC OPERATION

-16-

RADIO OPERATION

Listening to Radio

Press the SRC repeatedly to select the
RADIO mode, the message will like
following below :

Selecting The Frequency Band

Repeatedly press the BAND button on
the front panel to select the band, the
message will show in turn :

FM1 FM2 FM3

AM2(MW2)

AM1(MW1)

Start Searching For a Station

During Radio mode, briefly press the
button on the front panel to increase
frequency by one step of channel
spacing . (Or you can press button
on the remote control)

Manual Search

During Radio mode, briefly press the
button on the front panel to decrease
frequency by one step of channel
spacing . (Or you can press button
on the remote control)

Automatic Search

During Radio mode, press and hold
(for more than 2’s ) the “ / ” button
to start search for a radio station
automatically .

When an FM stereo broadcast is
hard to receive

Press ST/MO button on the remote
control to select the MONO or STEREO
mode . (When Stereo mode is activated,
the ST symbol will appear . )

You can use the “ / ” buttons on the
remote control to start search for a radio
station automatically .

To tune in strong-signal FM
Station only (LO/DX function)

Press the LOC/DX button on the remote
control to choose between the LOC and
DX mode of Local and Long-distance
traffic news . The word “LOC” or “DX”
will display in the screen .

Storing Stations In Memory

Setting Memory

With this system, a total of 30 stations
can be stored in the memory of six
buttons. Each band stores up to six
preset stations. The stations might be
FM1, FM2, FM3, AM1(MW1), and
AM2(MW2) band.
The operation is as below :

- Store in Memory

>Select the frequency band
>Select the station
>Keep the desired memory key pressed
in until the station is heard again after

a brief interruption .

BASIC OPERATION

-17-

In Radio Mode, press and keep (for more
than 2 ’ S) the remote of “ APS ” button
to active automatic station storage.
The radio searches within the current
frequency band, e.g. FM1, for the stron­ ger signal level until the search cycle
has finished . The six strongest stations
are then allocated to the corresponding
storage locations .
Then the station of the first storage
location is set .

Automatic Memory Storing &
Program Scanning

Automatic Preset Setup

Scan Function

In Radio mode, briefly press the “APS”
button on the remote control , the radio
briefly plays all the preset stations of the
frequency band .

REG FUNCTION

at certain times some stations divide up
their programs into regional programs
with varying content .
REG ON : the message “REG ON” will
appears in the display for a few seconds .
Note :

- the display capacity is limited . It is
possible that in the double display
mode some segments of the display
are deleted .

RDS FUNCTION

ADJUSTABLE ITEMS:

REGION SET

To switch the REGION function
ON and OFF.

- Retrieve a preset station
press the 1-6 buttons briefly on the

remote control to retrieve a station
which had been stored in the memory
in advance the chose number is shown
on display .

- the function REG ON prevents the

radio from switching to alternative
frequency which have a different regional
program content .

REG OFF : the program identification(PI)
of the regional program is ignored during
the search for an alternative frequency
(AF) or a program identification (PI) .

Select RDS REGIONAL to turn RDS
function on or off.

PI MUTE / PI SOUND

(only for radio ope ration)

f you are in an area where two program

identifications (PI) overlap, you can
select the option PI SOUND and
PI MUTE for playback of the sound.
Alternate switching of the program
identification should be avoided .

PI SOUND :
f switching nevertheless occurs the

sound of another station is heard for

less than one second .

PI MUTE :
the sound of another station is
suppressed .

In Radio mode, long press the 0/TA
button to switch the TA function ON
and OFF .

PI SET

To change between PI MUTE and
PI SOUND .

I

I

TA Traffic Announcement
(Priority For Traffic Information)

When the TA function is activated, the

TA symbol appears in the display .
During radio operation in one FM

frequency band the search for a traffic
announcement station is started
automatically (TA SEEK) .

If an FM station is being received which
transmits the latest traffic announce­ments from time to time, the TP display
lights up.

When the TA function is switched on ,
the FM traffic automatically interrupt
CD operation (the word TRAFFIC
appears in the display).

The volume level is increased to the
minimum value for the transmission of
traffic announcements.
After the traffic announcements has
finished, the program that was
previously running is resumed.

AF FUNCTION

(Alternative Frequencies)

AF is a function that works with the help
of RDS (Radio Data System) and can
only be used with FM stations. The radio
searches in the background for the best
frequency reception of the station that
has been tuned into .

When the AF function has been switched
on, the radio continuously tests the
signal strength of the AF frequency .

The test interval for each AF frequency

depends on the signal strength of the
current station and varies from a few

minutes in the case of weak signals.
Whenever the new AF frequency is
stronger than the station that is currently
tuned in , the radio switched to this
frequency for a short time for a short
time and the message

In Radio mode, long press the 9/AF
button to switch AF function ON and OFF .

“NEW FREQUENCY “ is displayed for
one or two seconds.

PTY FUNCTION

In Radio mode, press and hold “PTY”
to select the Program type .

PTY Selection of the program type
besides the stations name, some FM
stations also transmit information on the
type of program. This information can
be displayed by your car radio .

Examples of such types of program are :

SPORT NEWS POP WEATHER ......

With PTY function you can specifically
select stations transmitting a particular
type of program. Press the PTY button
repeatedly to call up the PTY selection
menu. The message “PTY SEEK” then
appears briefly in the display .
When PTY has been selected the radio
start searching for corresponding PTY
information and stops when the PTY
information has been found, “NO PTY”
appears in the display. If the PTY
information being searched for no longer
exists, the PTY function automatically
switches to normal mode .

BASIC OPERATION

-18-

SELECTING PLAY MODE

During the Disc playback, press the
“2, RDM, INT ” button on the remote
control to select the different playing
mode .

2). REPEAT FUNCTION

REPEAT OFF

REPEAT ONE REPEAT ALL

FOR VCD/CD :

Longer press 2 button on the remote
control to select REPEAT mode as
follows :

FOR Digital Video :

Longer press 2 button on the remote
control to select REPEAT mode as
follows :

REP EAT ALL

CHAPT ER REPEAT ON TITLE REP EAT ON

REP EAT OFF

-19-

MEDIA OPERATION

11

22

33

44

55 66

77

88

99

SE LSE L

VO LVO L

TOP

INT

RDM

AF

1). TOP FUNCTION

ForDigital Video/ VCD/CD/MP3:
In the state of Digital Video/VCD/CD/
MP3 disc playing, press the button to
select the first track/chapter to play.
(depend on the disc used for VCD)

3). INTRO FUNCTION

FOR CD :

longer press the 3/INT button on the
remote control to play the previous 10
seconds part of each track/chapter on
disc.
(Longer press again to cancel this mode)

FOR VCD :

longer press the 3/INT button on

the remote control, It display will

following menu as below :

SEQ PLAY INTR O 1

Note: when select INTRO 1 Mode, this
player to start to play the previous 10
seconds part of each track/chapter on
disc. (Longer press it again to cancel
this mode .)

FOR Digital Video/MP3 :

For Digital Video/MP3 , longer press the
INT button is not available .

4). RDM (RANDOM) FUNCTION

During DISC playback, longer press the
4/RDM button on the remote control to

play in random. Each playing, the order
is different .
(Depend on the disc used for VCD).
Longer press it again to cancel
this function .

REP EAT ALL

REP EAT ONE REP EAT FO LD ER

REP EAT OFF

FOR MP3 :

Longer press 2 button on the remote
control to select REPEAT mode as
follows :

ON-SCREEN DISPLAY FUNCTION

During playback, press the OSD button
on the remote control . It will display the
message for the playing media such as
Title Number, Chapter Number and so on.

-20-

Digital Video Special Function

Notes:

- The angle number is different
according to the disc.

- The function only work for disc having
scenes recorded at different angles.

- When no different angle are recorded,
will be displayed at

screen left top corner.

“ INVALID KEY ”

During Digital Video playback,
press the ANGLE button on the
remote control

3. Multi-Angle Function
(for Digital Video Only)

Each time the button is pressed , the
number of the angle changes in sequen­tial order.

4. Title Menu Function

For Digital Video:

If the Digital Video has multiple titles
recorded on the disc. It can select
preferred title from the title menu to start
playback.

- During Digital Video playback, press

TITLE button on the remote .The title
menu is display.

- Select preferred title by the cursor
button and confirmed by press the
ENTER button .

For VCD:

Press TITLE/PBC button on the remote
control while the disc is playing, you can
switch between "PBC ON"and "PBC off"
mode.

MONO L EF T MO NO R IGHT

STER EO

MIX- MO NO

For VCD/CD:

during playback, Press AUDIO on the
remote control . It is possible to switch
the sound between monaural and
stereo sound.

Notes:

- The language number is different
according to the disc.

- Some disc only contain one language
soundtrack

- When no different language soundtra­ ck are recorded will be
display at screen left top corner.

“ INVAL ID KEY ”

2. Multi-Audio Language Function

For Digital Video:

During Digital Video playback,
press the AUDIO on the remote

Each time the button is pressed number
changes on sequential order.

Notes:

- The language number is different
according to the disc.

- Some discs only contain one subtitle
language.

- When no different subtitle language
are recorded, “ INVALID KEY ” will be
displayed at screen left top corner.

During Digital Video playback.

press the SUBTITLE on the
remote control .

1. Multi-subtitle Language
Function (for Digital Video Only)

Each time the button is pressed number
of the subtitle language changes
in sequential order.

DIGITAL VIDEO SPECIAL FUNCTION

-21-

AUX OPERATION

On the front panel of this unit, there is an
AUX IN jack, follow the diagram below to
connect analogue replay devices(only
for the Audio connect, if you want to
connect the Video, please plug the
<Video input > on the back of the unit .) .
Use this jack to replay sound of other
replay equipment such as disc players,
computers, etc. Via the loudspeakers.

3). You now hear the sound from the
external device played back through
the loudspeakers .

4). use the VOL+/- on the front panel to
adjust the volume level.

AUX/AV OPERATION

1). Please connect the external device
with stereo jack plug the Aux in socket .

2). Press the SRC repeatedly to select
the AUX mode, the message will like
following as below :

AUX IN JACK FRONT PANEL

Ground

Right

Left

AV Operation

Please plug the <Video input >
on the back of the unit .

Press the SRC repeatedly to select the
AV mode, the message will like
following as below :

In AUX/ AV mode, you can use SEL, +, -,

VOL, MUTE, EQ , SW and LOUD buttons

to adjust audio and video.

Note: To ensure safety while driving and

to comply with lows, drivers should

not watch video or operate the

video device while driving.

Important Note:

1. During the DISC playback, if you want to play the USB, please first remove
USB and then connect it again to start (when the Disc and USB in this player).

2. When the DISC and USB in this player,they can not to transfer .

USB OPERATION

In USB Playback mode

You can use the UP, DOWN, RIGHT or LEFT buttons to navigate and to select
files to play, and press ENTER to begin playback (or viewing, in the case of
JPEG files).

To skip to the next or last track, press the or . Press the or
buttons for Fast Forward or Fast Reverse playback.

REPEAT play modes are also available by repeatedly pushing REPEAT until
the desired mode is found.

First remove the dust protection cap , then following the diagram below,
connect your device to the USB port of the unit . If it is properly connected, the
device will be mounted and start playing automatically. (All operations are as
same as disc mode .)

AUX/AV OPERATION

-22-

Mode change to card mode

After a memory card was inserted into the main unit card slot . the unit will starts
playing the files contained on the memory card . Once the unit read the memory card
successfully, the first file on the memory card will automatically start playback.
Press and hold the SEL button repeatedly is allowing changing to other modes .

Card OPERATION

The unit can support playback MP3/WMA/JPEG/MP4 format which are stored
into a memory card .
Please read below before you start the operation of memory card .

File Playback Operation

All the memory car playback operation function is same as the operation
on CD/MP3/WMA .
Please to “ MP3/WMA” operation for more details .

Change DISC to Card

The operations are same as USB mode, refer to see USB operation .

Change Card to DISC

The operations are same as USB mode, refer to see USB operation .

-23-

CARD OPERATION

INSERTING THE CARD .

First to slide the panel a
little to the right, then pull it
off towards you.

Insert the memory card.
Press in till heard a “CLICK”.
Attached the panel to play.

Label side
facing upward

REMOVING THE CARD .

Press in till heard a “CLICK”.
Remove the SD card and
attached the panel to play.

Press the open button
to flip down panel .

OPEN

Press the open button
to flip down panel .

OPEN

First to slide the panel a
little to the right, then pull it
off towards you.

MP3/WMA/JPEG/MPEG4 PLAY

-24-

MP3/MP4 OPERATION

The unit is support MP3/WMA/JPEG/MPEG4 . During playing press the MENU,
the following picture will appear on the monitor . The unit will play the first track
automatically . You can to choose others mode (MP3/JPEG /MPEG4) to play .
EX. : when the MP3 mode is selected .

As the interface show, Use / / / on the remote control to select the
play mode or item, then press ENTER button on the remote control to confirm.

NOTE:

in JPEG/MPEG4 mode, the details operations as same as MP3/WMA operation .

1 Current type (highlighted bar) .

2 Audio play mode select.

3 Picture play mode select.

4 Movie play mode select,

5 Current play track .

SKIP AHEAD / BACK

In playback mode, press the or button on front panel to skip ahead or
back one item in the list . (Or press the or button on the remote control .)

Fast Forward/ Fast Reverse Playback

In playback mode, press and hold (for a more than two seconds ) the or on
front panel to move to FAST FORWARD or FAST REVERSE play .
You can also briefly press the or button on remote control to accomplish
this .

REPEAT FUNCTION

Pressing REPEAT button repeatedly can select repeat play mode.
REP-ONE:

Play the same song over and over again.
REP ALL:
Play all songs on the disc, then repeats the entire disc over and over again .

1

SONGS 001

002

003

004

2 3 4

5

-25-

STEERING WHEEL CONTROL

Press the SRC repeatedly to select the
SWC mode, the message will like
following as below :

There are 2 KEY for no more than 12
buttons to select.
For first time use this function, input a
key (such as 0.38,0.38 is a magnitude
of voltage, according to your car )
through the steering remote and
show in button 1 position.

Use the VOL knob or the </> button to
do selection.
First select Assign begin setting;
then select the input(0.38) and press
SEL or ENTER to confirm;

Then select a function icon such as
will show in button 1 position and select
to confirm and back to home menu
that means select finish.

The function of the icons as follow:

To begin function save.

After selection to confirm
operation.

To cancel the input and
resume load.

When electric resistance is too
low, select this icon to increase.

When electric resistance is too
high, select this icon to reduce.

0.38

SPECIFICATION

-26-

RADIO Section :

For 2 Bands For 2 Bands
(Europe) (U.S.A.)
FM FM
Frequency Coverage: 87.5 to108 MHz 87.5 to107.9 MHz
IF: 10.7 MHz 10.7 MHz
Sensitivity (S/N = 30 dB): 15 dBu 15dBu
MW AM
Frequency Coverage: 522 to1620 KHz 530 to1710 KHz
IF: 450 KHz 450 KHz
Sensitivity (S/N = 20 dB): 40 dBu 40 dBu

TFT Section :

Monitor Screen Size: 3.2 Inch Wide
Color System: NTSC/PAL

NOTE:

Specification and design are subject to modification, without notice, due to
improvements in technology.

Supply Voltage: 12V DC (11V-15V)
Current Consumption: Less than10 A

Maximum Power Output: 4 x 80W

Signal System: Compositive video 1.0Vp-p 75
Discs Played: (1)DIGITAL VIDEO-VIDEO Disc
5"(12 cm) single-sided, single-layer
5"(12 cm) single-sided, double-layer
(2)Compact Disc (CD-DA, VIDEO CD)
5"(12cm) disc

Audio Signal Output: Front, Rear, and Subwoofer Output
Characteristics: (1)Frequency Response 20 Hz - 20 KHz
(2)S/N Ratio 90 dB (JIS)
(3)Wow and Flutter Below measurable limits

Before going through the check list, check wiring connection. If any of the problems
persist after check list has been made, consult your nearest service dealer.

TROUBLESHOOTING

-27-

Inserting the disc in reverse
direction

Press the RESET button.
Front panel is not properly fixed
into its place

The car ignition switch is
not on

If the power supply is properly
connected to the car accessory
terminal,switch the ignition key
to "ACC"

The fuse is blown

Replace the fuse

Presence of disc inside the
player.

Remove the disc in the player,
then put a new one

Insert the compact disc with
the label facing upward

The disc is extremely dirty
or defective

Clean the disc or try to play a
new one

Temperature inside the car
is too high

Cool off or until the ambient
temperature return to normal

Unit has frozen up

The antenna cable is not
connected

Insert the antenna cable firmly

The signals are too weak

Select a station manually

SYMPTOM CAUSE SOLUTION

Video/image
appears
black-white

The color system is
set incorrectly

Please switch to correct color
system from menu

No video/image
appears

The unit is not connected
to the parking brake
detection switch

Make proper connection
according to wire connection “ ”

The parking brake is not
engaged

For safety reasons no video/
images are displayed
while the vehicle is moving.
Engaging the parking brake will
cause images to be displayed.

Unit has become
unresponsive

The radio does not
work

Disc can not be
loaded or ejected

No power

No color in picture

The disc format is not
according to the TV-set
used (PAL/NTSC)

Please the color system of
the choice accommodation

JPEG disc can
not be played
back

No JPEG files are recorded
on the disc.

JPEG files are not recorded
in a compliant format

Change the disc
Record JPEG files using a
compliant application

Change the disc

BV7345MADE IN CHINA