Boss BV7265B Installation Manual

Installation

ATTENTIONS OF INSTALLATION

1.This player should be installed by professional technician.

2.please read the instruction and operation of equipment carefully before installing.

3.Make sure to connect other wires before power connection.

4.To avoid short circuit. Please make sure all the exposed wire are insulating.

5.please fix all the wires after installation.

6.please make connection to the player accordingly to this instruction manual. Wrong connection may cause damage.

7.This player only fit for 12V DC device and please make sure your car belongs to this kind of cathode grounding electrical system.

8.Please connect the wires rightly. Wrong connection will cause malfunction or damage the electrical system.

INSTALL THE UNIT

REMOVE THE UNIT

Insert the keys supplied on the both sides of the unit until they click. Pulling the keys and makes them to remove the unit from the dashboard.

Installation

WIRING CONNECTION

1.This player can only be used by the 12V DC cathode grounding electrical system.

2.Don’t connect the terminals of the battery until the player is absolutely with well erection joint.

3.Please make sure to connect the yellow wire to the positive of the battery(+).

4.When change the fuse. Please make sure the specifications are same.

5.Using good quality speaker with 4-8 ohm can result in the best effect of the equipment.