Bose MA12EX Specifications

Page 1
Panaray® MA12EX
full-range modular line array
Key Features
Twelve 2.25" (64 mm) full-range drivers mounted in a vertical line array
deliver wide horizontal coverage with narrow vertical pattern control
Modular design allows stacking of multiple enclosures in a line
array configuration to provide increased vertical pattern control which improves “throw” distance and reduces unwanted floor/ceiling reflections
Articulated Array® design provides wide 160° horizontal coverage
with 20° nominal vertical coverage for a single module. Actual vertical coverage varies with number of modules in line array configuration
Frequency range down to 58 Hz allows full-range speech and light
music reinforcement without separate low-frequency loudspeakers. For extended bass and higher output levels, use with Bose MB4, MB12, or MB24 modular bass loudspeakers
Optional brackets allow easy installation of single-, double- or triple-
stack line array modules
Product Overview
The Bose® Panaray® MA12EX is a full-range modular line array loudspeaker designed to provide outstanding vocal intelligibility in acoustically demanding spaces. The slim column enclosure blends with almost any décor. The "EX" version adds an Articulated Array design to provide wider 160° horizontal coverage and weather-resistant components to allow outdoor applications.
TECHNICAL DATA SHEET
®
Technical Specifications
System Performance
Frequency Response (+/-3 dB)
Frequency Range (-10 dB)
Nominal Dispersion
Recommended High-Pass Filter 65 Hz
Loudspeaker EQ Required
Overload Protection PTC / Lamp
Long-Term Power Handling
Sensitivity (SPL / 1 W @ 1 m)
Maximum SPL @ 1 m
Nominal Impedance 8 Ω
Transformer Taps (70/100 V) CVT-MA12EX transformer available
Transducers
Driver Compliment Twelve (12) 2.25" (57 mm) high-excursion, weather-resistant drivers
Physical
Enclosure Powder-coated aluminum, black or white
Grille Powder-coated aluminum grille
Environmental Outdoor per IEC 529 IPX5
Connectors Two (2) parallel-wired NL4 Neutrik® Speakon® connectors
Suspension / Mounting Six (6) x M6 threaded inserts (back)
Dimensions 38.8" H x 4.1" W x 5.5" D (985 mm x 104 mm x 139 mm)
Net Weight 21 lb (9.4 kg)
Shipping Weight 23 lb (10.4 kg)
Product Code
Black 317302-0100
White 317302-0200
Footnotes:
1 Frequency response and range measured on-axis with recommended active EQ in an anechoic environment. 2 Vertical coverage varies by number of modules vertically arrayed and distance from line-source boundary. Use Modeler® software for the best prediction. 3 Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ. 4 MA12EX PowerHandling. 150W for full-range music and speech applications. Speech-only applications (155 Hz to 12 kHz), power handling (continuous) at 300W/1200W. 5 Sensitivity measured in free field (no boundary-loading gain) with recommended active EQ, referenced to 1W/1m. 6 Maximum SPL calculated from sensitivity and power handling specifications, exclusive of power compression.
1
1
2
3 , 4
5
6
75 Hz - 13 kHz
58 Hz - 16 kHz
160° H x 20° V
150 W (600 W peak)
87 dB SPL
109 dB SPL (115 dB SPL peak)
Two (2) two-conductor barrier strips
Bose Professional Systems Division
OF 6
1
Page 2
Panaray® MA12EX
full-range modular line array
Directivity Index and Q
Beamwidth
TECHNICAL DATA SHEET
Impedance
On-Axis Response
Bose Professional Systems Division
OF 6
2
Page 3
Panaray® MA12EX
full-range modular line array
Wiring Diagram
Mechanical Diagrams
TECHNICAL DATA SHEET
Bose Professional Systems Division
OF 6
3
Page 4
Panaray® MA12EX
full-range modular line array
Horizontal Plots
TECHNICAL DATA SHEET
Bose Professional Systems Division
OF 6
4
Page 5
Panaray® MA12EX
full-range modular line array
Vertical Plots
TECHNICAL DATA SHEET
Bose Professional Systems Division
OF 6
5
Page 6
Panaray® MA12EX
full-range modular line array
Architects’ and Engineers’ Specifications
The loudspeaker shall be a multiple driver, full-range system with matched active equalization as follows:
The transducer complement shall consist of twelve 2.25" (57 mm) high-excursion, weather-resistant drivers mounted in an Articulated Array® loudspeaker design. Each driver shall have a rated impedance of 5 ohms and wired in series/parallel, resulting in a composite nominal impedance of 8 ohms.
The nominal horizontal beamwidth of the loudspeaker shall be 160 degrees, and the vertical coverage is a band of constant height. The power handling capacity of the loudspeaker shall be 150 watts continuous pink noise, band-limited from 75 Hz to 13 kHz (±3 dB).
The loudspeaker shall be provided with a ducted vent system, tuned at 75 Hz. The input connector of the loudspeaker module shall consist of two parallel-wired NL4 Neutrik Speakon® connectors and two (2) two-conductor barrier strips.
The enclosure of the MA12EX speaker module shall be aluminum. Its outer dimensions shall be 38.8" x 4.1" x 5.5" (985 mm x 104 mm x 139 mm). Its weight shall be 21 lb (9.4 kg).
The loudspeaker shall be the Bose® Panaray® MA12EX modular line array loudspeaker.
®
TECHNICAL DATA SHEET
Bose Professional Systems Division
All information subject to change without notice.
All trademarks are those of their respective owners.
® 2012 Bose Corporation
OF 6
6
Loading...