Bose IC-1 User Manual

Wave

®

Music System IC-1

The Wave® Music System IC-1

EnglishDeutschFrançaisKorean EspañolItalianoThai NederlandsS. ChinArabic

Thank you for purchasing the IC-1 (Integrated
Controller-1). It is designed to work with the

®

Wave

music system, providing easy access to

complete system functionality.

Cable

Foot rests

Button panel

Flat bottom section

Placing the IC-1

With its feet securely seated in the IC-1 foot rests, the

®

Wave

music system sits firmly in position, just behind

the button panel.

This product conforms to the EMC
Directive 89/336/EEC and to the Low
Voltage Directive 73/23/EEC. The complete
Declaration of Conformity
can be found on www.bose.com

This product complies with the Canadian
ICES-003 Class B specifications.

1. Place the IC-1 on a solid and level surface with its
cable extended full length in back.

2. Lower the Wave

®

music system onto the flat
bottom section of the IC-1 until the front feet of
the Wave

®

music system slip into the foot rests.

3. Insert the connector of the IC-1 cable into the

®

link jack on the rear of the Wave® music

Bose
system.

®

With the Wave

music system plugged into an outlet,

the IC-1 is now ready for use.

Clean only with a dry cloth.

Foot rest

Connector

Cable

Bose® link jack

Foot rest