Page 1
F1 Flexible Array Loudspeaker System
F1 Model 812 Passive Loudspeaker
Installation and Safety Guidelines
Instrucciones de Instalacion y de Seguridad
Installation et Instructions de Sécurité
Installations- und Sicherheitshinweise
Page 2
Important Safety Instructions
pro.Bose.com
Please read this owner’s guide carefully and save it for future reference.
This product is intended for installation by professional installers only! This document is intended to provide professional installers with
basic installation and safety guidelines for this product in typical fixed-installation systems. Please read this document before attempting
installation.
WARNINGS:
• All Bose® products must be used in accordance with local, state, federal and industry regulations. It is the installer’s responsibility to
ensure installation of the loudspeakers and mounting system is performed in accordance with all applicable codes, including local
building codes and regulations. Consult the local authority having jurisdiction before installing this product.
• Unsafe mounting or overhead suspension of any heavy load can result in serious injury and equipment damage. It is the responsibility
of the installer to evaluate the reliability of any mounting method used for their application. Only professional installers with the
knowledge of proper hardware and safe mounting techniques should attempt to install any loudspeaker overhead.
• Do not use the F1 Model 812 Passive speaker with a tripod/stand that is unstable. The speaker is only designed for use on a 35 mm
post, and the tripod/stand must be capable of supporting a speaker with a minimum weight of 47 lbs (21.4 kg) and an overall size of
26.2” x 13.1” x 14.8” inches (665 mm x 334 mm x 375 mm). Using a tripod/stand that is not designed to support the size and mass of
the F1 Model 812 Passive speaker may lead to an unstable and hazardous condition that could result in injury.
WARNING: Do not place naked flame sources, such as lighted candles, on or near the product.
WARNING: This product contains magnetic material. Contact your physician if you have any questions on whether this might
aect the operation of your implantable medical device.
CAUTION: Do not make unauthorized alterations to this product; doing so may compromise safety, regulatory compliance, system
performance, and may void the warranty.
Instrucciones de Seguridad Importantes
Lea atentamente esta guía del usuario y guárdela para consultarla en el futuro.
Solo un instalador profesional deberá montar este producto! Este documento ofrece a los instaladores profesionales instrucciones
básicas de instalación y seguridad para este producto en sistemas típicos de instalación fija. Lea este documento antes de intentar la
instalación.
ADVERTENCIA:
• Todos los productos Bose® deben utilizarse de acuerdo con las normas locales, estatales, federales e industriales. Será responsabilidad
del instalador asegurarse de que la instalación de los altavoces y del sistema de montaje se realiza de acuerdo con todos los códigos
aplicables, incluidos los códigos y normativas de construcción locales. Consulte a las autoridades locales pertinentes antes de instalar
este producto.
• El montaje no seguro o la suspensión de cualquier carga pesada puede producir heridas graves y daños al equipo. Será
responsabilidad del instalador evaluar la fiabilidad de cualquier método de montaje empleado en su aplicación. Sólo los instaladores
profesionales con conocimiento de los accesorios adecuados y las técnicas de montaje seguro deberán intentar instalar cualquier
altavoz en suspensión.
• No utilice el altavoz F1 Model 812 Passive con un trípode que no sea estable. Este altavoz ha sido diseñado para utilizarse
exclusivamente en un poste de 35 mm. El trípode debe poder soportar un altavoz con un peso mínimo de 21,4 kg y un tamaño total
de 665 mm x 334 mm x 375 mm (alto x ancho x fondo). El uso de un trípode que no haya sido diseñado para soportar el peso y el
volumen del altavoz F1 Model 812 Passive puede constituir una situación de peligro e inestabilidad que podría ocasionar lesiones.
ADVERTENCIA: No coloque llamas vivas, por ejemplo, velas, encima o cerca del aparato.
ADVERTENCIA: Este producto contiene material magnético. Consulte a su médico si tiene alguna duda acerca de los efectos
que esto pudiera tener en el funcionamiento de un dispositivo médico implantado.
PRECAUCIÓN: No realice modificaciones no autorizadas del producto; en caso contrario puede poner en riesgo la seguridad, el
cumplimiento normativo, el rendimiento del sistema y anular la garantía.
Important Safety Instructions2 English
Page 3
pro.Bose.com
Instructions Importantes Relatives à la Sécurité
Consultez attentivement cette notice d’utilisation et conservez-la pour toute référence future.
L’installation de ce produit est réservée à un technicien professionnel! Ce document à l’intention des installateurs professionnels
contient les directives de pose et de sécurité relatives pour ce produit en installation fixe. Lisezattentivement ce document avant
l’installation.
ATTENTION:
• Tous les produits Bose® doivent être utilisés en respectant les réglementations locales et nationales. L’installateur est responsable
du respect de tous les codes et règlements locaux et nationaux en vigueur applicables à l’installation et au montage des enceintes.
Consultez les autorités locales compétentes avant d’installer ce produit.
• Tout montage non sécurisé d’une lourde charge peut provoquer des dégâts matériels et des blessures graves. Il en va de la
responsabilité de l’installateur d’évaluer la fiabilité de toute méthode de montage utilisée pour cette application. Seul un installateur
professionnel connaissant le matériel et les techniques de montage adaptées est qualifié pour installer des enceintes suspendues.
• N’utilisez pas l’enceinteF1 modèle812 Passive avec un trépied instable. L’enceinte est conçue pour accueillir un tube de
35mm uniquement, et le trépied doit pouvoir supporter une enceinte d’au moins 21,4kg et aux dimensions suivantes:
665mmx334mmx375mm (HxLxP). L’utilisation d’un trépied non conçu pour supporter le poids d’une enceinteF1 modèle812
Passive aux dimensions précitées est dangereuse en raison de son instabilité.
ATTENTION: Ne placez aucune source de flamme nue, comme une bougie allumée, sur ou près de l’appareil.
ATTENTION: Ce produit contient des composants magnétiques. Contactez votre médecin pour toute question relative à
l’eet de ces composants sur le fonctionnement d’un appareil médical implanté.
AVERTISSEMENT: Toute modification non autorisée peut compromettre votre sécurité, le respect des réglementations et le bon
fonctionnement de l’appareil, et en invalidera la garantie.
Wichtige Sicherheitshinweise
Bitte lesen Sie diese Bedienungsanleitung sorgfältig durch und bewahren Sie sie zum späteren Nachschlagen
auf.
Dieses Produkt darf nur von fachkundigen Monteuren installiert werden! Dieses Dokument soll fachkundigen Monteuren grundlegende
Installations- und Sicherheitsrichtlinie für dieses Produkt in typischen Festinstallationssystemen bieten. Bitte lesen Sie dieses Dokument
vor der Installation durch.
WARNUNG:
• Alle Bose®-Produkte müssen gemäß den örtlichen und staatlichen Vorschriften sowie gemäß allen Branchenbestimmungen verwendet
werden. Der Monteur ist dafür verantwortlich, sicherzustellen, dass die Installation der Lautsprecher und der Halterung gemäß allen
geltenden Vorschriften durchgeführt wird, einschließlich örtlicher Bauvorschriften und Bestimmungen. Wenden Sie sich vor der
Installation dieses Produkts an die zuständige Rechtsbehörde.
• Unsichere Befestigung oder ein Aufhängen über Kopf schwerer Lasten kann zu schweren Verletzungen und Sachschäden führen.
Der Monteur ist dafür verantwortlich, die Zuverlässigkeit der für die Anwendung verwendeten Befestigungsmethoden zu prüfen.
Nur fachkundige Monteure mit Wissen über ordnungsgemäße Befestigungselemente und sichere Befestigungstechniken sollten
Lautsprecher über Kopf installieren.
• Verwenden Sie den F1 Model 812 Passive Lautsprecher nicht mit einem instabilen Stativ. Der Lautsprecher ist nur für die Verwendung
mit einem 35-mm-Sockel ausgelegt, und das Stativ muss einen Lautsprecher mit einem Mindestgewicht von 21,4 kg und einer
Gesamtgröße von 665 mm H x 334 mm B x 375 mm T) tragen können. Bei Verwendung eines Stativs, das nicht auf die Größe und
Masse des F1 Model 812 Passive Lautsprechers ausgelegtes, kann es zu instabilen und gefährlichen Situationen kommen, die zu
Verletzungen führen können.
WARNUNG: Stellen Sie keine brennenden Kerzen oder ähnliches auf das Gerät oder in die Nähe des Geräts.
WARNUNG: Dieses Produkt enthält magnetische Materialien. Bitte wenden Sie sich an Ihren Arzt, wenn Sie wissen möchten,
ob dies den Betrieb Ihres implantierten medizinischen Geräts beeinflussen kann.
ACHTUNG: Keine nicht autorisierten Veränderungen am Produkt vornehmen. Diese können die Sicherheit, die Einhaltung von Richtlinien
und die Systemleistung beeinträchtigen. In diesem Fall kann die Garantie ungültig werden.
English 3Important Safety Instructions
Page 4
Contents
pro.Bose.com
Introduction
Product Overview ............................................................................................................................................................................... 5
Features ........................................................................................................................................................................................... 5
Parts List ................................................................................................................................................................................................. 5
Using the Flexible Array ................................................................................................................................................................... 6
Loudspeaker Dimensions ................................................................................................................................................................. 6
Flexible Array Coverage Patterns ................................................................................................................................................. 7
Installation
U-Bracket Mounting Kit .................................................................................................................................................................... 8
U-Bracket Coverage Patterns ................................................................................................................................................. 9
Yoke Mounting Kit ............................................................................................................................................................................... 10
Yoke Mounting Kit Coverage Patterns ................................................................................................................................ 10
Pan-and-Tilt Bracket ........................................................................................................................................................................... 11
Pan-and-Tilt Bracket Coverage Patterns ............................................................................................................................ 11
Using the F1 Model 812 Passive on a Tripod Stand ................................................................................................................ 12
Tripod Stand Coverage Patterns ........................................................................................................................................... 13
Operation
Recommended Amplifier ................................................................................................................................................................. 14
Example Compatible Bose® Amplifiers ............................................................................................................................... 14
Recommended Signal Processing ................................................................................................................................................ 14
Recommended Active EQ Settings ............................................................................................................................................. 15
Technical Information
Technical Specifications .................................................................................................................................................................... 16
Limited Warranty and Registration .............................................................................................................................................. 16
Additional Resources
Contact Information ........................................................................................................................................................................... 17
Importer Information .................................................................................................................................................................. 17
4 English
Installation Guide
Page 5
pro.Bose.com
Introduction
Product Overview
The Bose® F1 Model 812 Passive Flexible Array loudspeaker is a small-format, full range sound reinforcement
loudspeaker with FLEX array technology, featuring four field-selectable sound coverage patterns: Straight,
C, J, and Reverse-J. The flexible array shape is easily snapped into place on site, allowing installers to direct
sound energy to listeners and away from wall and ceiling surfaces. This improved directivity means less
reverberation and more SPL in the audience area, which is especially helpful in live music applications. For
installers, mounting is easier because the loudspeaker is more adaptable to the venue, with less compromise
on mounting location or visual appearance.
The F1 Model 812 Passive loudspeaker features a nine-transducer full-range design, including a flexible mid/
high array using eight 2.25-inch drivers, a 100-degree horizontal waveguide, and one high-excursion 12-inch
woofer. Loudspeaker EQ is required and available using the presets provided by any Bose ControlSpace®
processor or PowerMatch® amplifier.
Features
• FLEX array technology - Bose exclusive flexible bae can be configured into four unique shapes, allowing
you to choose the best possible coverage pattern for the application
• 8-driver mid/high line array - Eight drivers, each mounted on a custom waveguide, help deliver wide,
consistent coverage
• 12-inch LF driver - High performance woofer provides strong low frequency output
• Full-range response - Reduces the need for subwoofers for moderate full-range music levels
• Mounting accessories - Built with six M8 threaded insert points that can be combined with a full suite
of optional mounting accessories. Choose from a Pan-and-Tilt Bracket, U-Bracket, and Yoke Bracket, all
available separately from Bose
• Passive design - Optimized for indoor installations and distributed systems
• Rugged enclosure - Rugged but professional looking design, great for permanent installations as well as
portable set-ups
• Integrated pole mount - For use with standard 35 mm tripod speaker stands
Parts List
Each F1 Model 812 Passive Flexible Array loudspeaker carton contains the following parts:
• F1 Model 812 Passive Flexible Array loudspeaker
• Installation guide
Installation Guide English 5
Page 6
Introduction
Using the Flexible Array
Shape the coverage pattern by moving the position of the top and bottom array.
Pulling the array outPushing the array in
Loudspeaker Dimensions
pro.Bose.com
6 English
Installation Guide
Page 7
pro.Bose.com
Flexible Array Coverage Patterns
Straight Pattern
Reverse-J Pattern
Introduction
J Pattern
C Pattern
Installation Guide English 7
Page 8
Installation
pro.Bose.com
U-Bracket Mounting Kit
The U-Bracket Mounting Kit available from Bose allows for ±115 degrees of rotation to adjust the coverage
angle for wall and ceiling-mounted installations. When the F1 Model 812 Passive loudspeaker is mounted
horizontally, use the flexible array to adjust the horizontal coverage pattern for each loudspeaker by up to 40
degrees, and the U-bracket to adjust the vertical mounting angle and direct the loudspeaker’s 100 degrees
of vertical coverage. This vertical and horizontal flexibility maximizes coverage with each loudspeaker and
supports asymmetrical configurations to reduce side wall reflections and improve clarity.
For complete safety and installation instructions, see the U-Bracket Mounting Kit Installation Guide included
with the mounting kit (Product Code 736453-0110).
Horizontal Mount
U-Bracket Ranges
Speaker
Orientation
Horizontal - ±115°
Vertical ±115°
Pan/Yaw
Degrees
Tilt/Pitch
Degrees
-
Side View: Horizontal Ceiling Mount
±115°
Side View: Horizontal Wall Mount
±115°
You can also mount the F1 Model 812 Passive loudspeaker vertically, using
the flexible array to adjust the vertical coverage pattern and the U-bracket
to adjust the horizontal mounting angle.
Vertical Mount
8 English
The Bose® logo on the loudspeaker can be adjusted
for horizontal mounting. Pull the logo away from the
loudspeaker grille and rotate it 90 degrees in either
direction. Once repositioned, push the logo back in
toward the loudspeaker so it is flush with the grille.
Installation Guide
Page 9
pro.Bose.com
U-Bracket Coverage Patterns
Side View
±115° mounting angle adjustment, directed 100° vertical coverage
Top View: Reverse-J, C, and J Patterns
Asymmetrical array configuration to reduce side wall reflections and improve clarity
Installation
Top View: C Patterns
Directed 100° vertical coverage and symmetrical horizontal coverage
Installation Guide English 9
Page 10
Installation
pro.Bose.com
Yoke Mounting Kit
The Yoke Mounting Kit available from Bose allows for adjustment of the pitch (up/down angle) and yaw
(right/left angle) of the loudspeaker in ceiling-mounted installations. Use the flexible array to futher refine the
vertical coverage pattern by up to 40 degrees. The yoke mounting bracket is suitable for standard and high
ceiling installations.
For complete safety and installation instructions, see the Yoke Mounting Kit Installation Guide included with
the mounting kit (Product Code 736451-0110).
Pitch and Yaw Ranges - Ceiling Mounted
Pitch Degrees Yaw Degrees
±45° ±7.5°
Yoke Mounting Kit Coverage Patterns
Side View: J Pattern
Standard Ceiling
Side View: C Pattern
Standard Ceiling High Ceiling
High Ceiling
10 English
Installation Guide
Page 11
pro.Bose.com
Installation
Pan-and-Tilt Bracket
The Pan-and-Tilt Bracket available from Bose allows both pan/yaw (right/left angle) and tilt/pitch (up/down
angle) adjustment for the wall-mounted F1 Model 812 Passive loudspeaker. Use the flexible array to further
refine the vertical coverage pattern by up to 40 degrees.
For complete safety and installation instructions, see the RMUBRKT1 Pan-and-Tilt Bracket Installation Guide
included with the bracket accessory kit (Product Code 738453-0110).
Pan-and-Tilt Ranges - Wall Mounted
Pan-and-Tilt Ranges - Wall Mounted
Speaker
Speaker
Orientation
Orientation
Horizontal ±15° 0° to 30°
Horizontal ±15° 0° to 30°
Vertical ±45° 0° to 15°
Vertical ±45° 0° to 15°
Pan/Yaw
Pan/Yaw
Degrees
Degrees
Tilt/Pitch
Tilt/Pitch
Degrees
Degrees
Pan-and-Tilt Bracket Coverage Patterns
Pan-and-Tilt Bracket Coverage Patterns
Side View: J Pattern
Side View: J Pattern
Achieve your intended coverage without tilting the loudspeaker
Achieve your intended coverage without tilting the loudspeaker
Side View: C Pattern
Side View: C Pattern
Installation Guide English 11
Page 12
Installation
pro.Bose.com
Using the F1 Model 812 Passive on a Tripod Stand
The bottom of the F1 Model 812 Passive loudspeaker includes pole cup for mounting the loudspeaker on a
tripod speaker stand. The pole cup fits a standard 35 mm post.
WARNING: The F1 Subwoofer speaker stand is not compatible with the F1 Model 812 Passive loudspeaker. The
bottom of the F1 Model 812 Passive is designed to be used only with a standard 35 mm pole mount.
WARNING: Do not use the F1 Model 812 Passive loudspeaker with a tripod stand that is unstable. The
loudspeaker is only designed for use on a 35 mm pole, and the tripod stand must be capable of supporting
a loudspeaker with a minimum weight of 21.31 kg (47 lb) and an overall size of 665 mm H x 334 mm W x 375
mm D (26.2” H x 13.1” W x 14.8” D). Using a tripod stand that is not designed to support the size and mass of
the F1 Model 812 Passive loudspeaker may lead to an unstable and hazardous condition that could result in
injury.
Pole cup fits a
standard 35 mm
tripod stand
12 English
Installation Guide
Page 13
pro.Bose.com
Tripod Stand Coverage Patterns
Side View: Straight Pattern
Side View: Reverse-J Pattern
Installation
Side View: J Pattern
Side View: C Pattern
Installation Guide English 13
Page 14
Technical Information
pro.Bose.com
Recommended Amplifier
Selecting the proper amplifier size for a given loudspeaker requires analysis of the transducer long-term (or
RMS) power rating, dynamic range of the input-source material (crest factor), desired sound pressure levels,
and other factors. As a general guideline, the following table provides recommended power amplifier ranges.
Model Nominal Impedance Required Channels Amp Power Rating
F1 Model 812 Passive 8 Ω 1 300 - 1200 W
CAUTION: Failure to follow these guidelines may result in damage to the loudspeaker.
The Bose® PowerMatch configurable power amplifiers oer optimal amplification, amplifier limiting, digital
signal processing (DSP), and DSP presets for use with the F1 Model 812 Passive Flexible Array loudspeaker.
Please refer to the specifications listed on the pro.bose.com website for amplifiers and compare with the
table above to determine which model is best for your particular system design.
Recommended Signal Processing
Digital signal processing (DSP) is required for infrasonic bandpass protection, amplifier power limiting, and
active equalization to the F1 Model 812 Passive loudspeaker. Bose PowerMatch amplifiers provide all required
DSP functions, including amplifier limiting functions, as well as presets that automatically set all DSP values
for the loudspeaker in each of the four flexible array positions.
Bose ControlSpace® DSP hardware, including the ESP-880, ESP-1600, ESP-1240, ESP-4120, and ESP-00, can
also be used to provide active equalization and bandpass protection.
The latest Control Space Designer software for PowerMatch and DSP hardware, which contains the latest F1
preset files, can be found in the Software section of pro.Bose.com.
The following table lists the required infrasonic bandpass protection and amplifier limiter settings for the F1
Model 812 Passive loudspeaker when used without additional subwoofers.
Bandpass Limiter
High Pass Low Pass V Peak V RMS
Speaker Type Freq. Type Freq. Threshold Attack Release Threshold Attack Release
F1 Model
812 Passive
BW24 40 BW24 20000 100 1.5 ms 100 ms 50 1 s 2 s
14 English
Installation Guide
Page 15
pro.Bose.com
Technical Information
The following table lists recommended Active EQ raw values for the F1 Model 812 Passive loudspeaker when
used without additional subwoofers. For EQs with fewer than 9 bands, subtract bands 9, 8, and 7, in that
order.
Straight Coverage Pattern
Band 1 Band 2 Band 3 Band 4 Band 5 Band 6 Band 7 Band 8 Band 9
Frequency 60 115 400 485 570 1000 3000 6800 12000
Gain 9.0 3.1 -2.0 -5.0 2.0 -2.0 -4.5 1.0 2.0
Bandwidth 0.500 0.800 0.330 0.750 0.300 0.333 1.752 0.800 0.500
(Q) 2.871 1.780 4.320 1.902 4.800 4.323 0.775 1.780 2.871
C Coverage Pattern
Band 1 Band 2 Band 3 Band 4 Band 5 Band 6 Band 7 Band 8 Band 9
Frequency 60 115 400 485 570 1000 2500 3000 9500
Gain 9.0 3.1 -2.0 -5.0 2.0 -2.0 -5.2 6.5 1.0
Bandwidth 0.500 0.800 0.330 0.750 0.300 0.333 1.550 High Shelf 1.300
(Q) 2.871 1.780 4.320 1.902 4.800 4.323 0.887 High Shelf 1.073
J and Reverse-J Coverage Patterns
Band 1 Band 2 Band 3 Band 4 Band 5 Band 6 Band 7 Band 8 Band 9
Frequency 60 115 400 485 570 1000 3000 3500 6850
Gain 9.0 3.1 -2.0 -5.0 2.0 -2.0 -4.5 2.0 1.5
Bandwidth 0.500 0.800 0.330 0.750 0.300 0.333 1.950 High Shelf 1.000
(Q) 2.871 1.780 4.320 1.902 4.800 4.323 0.686 High Shelf 1.414
Recommended Subwoofers
The F1 Model 812 Passive loudspeaker can be used without a subwoofer. However, it can also be used with a
subwoofer, in which case Bose recommends the MB12 passive subwoofer for indoor installed applications.
The F1 Subwoofer can be used with the F1 Model 812 Passive loudspeaker. However, the F1 Subwoofer is an
active subwoofer and may not be suitable in system setups that include the F1 Model 812 Passive loudspeaker.
WARNING: The F1 Subwoofer speaker stand is not compatible with the F1 Model 812 Passive loudspeaker. The
bottom of the F1 Model 812 Passive is designed to be used only with a standard 35 mm pole mount.
Installation Guide English 15
Page 16
Technical Information
pro.Bose.com
Physical Specifications
Connectors Two (2) parallel-wired NL4 NEUTRIK® speakON® connectors
Four-terminal barrier strip (for use with speaker wire up to 12 gauge)
Suspension/Mounting 6 x M8 threaded inserts, 1 x 1-3/8” (35 mm) pole mount
Enclosure High impact composite materials
Grille Powder-coated perforated steel grille
Dimensions (H x W x D), mm 665 mm x 334 mm x 375 mm
Dimensions (H x W x D), inches 26.2” x 13.2” x 14.8”
Net Weight 21.3 kg (47 lbs)
Environmental Rating Indoor
Technical specifications subject to change. See pro.Bose.com for the latest technical data sheet and for more information.
Limited Warranty
Your product is covered by a limited warranty, Visit pro.Bose.com for warranty details.
The warranty information provided with this product does not apply in Australian and New Zealand. See our
website at www.bose.com/au/warranty or www.bose.com/nz/warranty for details of the Australian and New
Zealand warranty.
NEUTRIK® and speakON® are registered trademarks of Neutrik AG.
16 English
Installation Guide
Page 17
pro.Bose.com
Contact Information
Visit us on the web at pro.Bose.com.
Americas
(USA, Canada, Mexico, Central America, South
America)
Bose Corporation
The Mountain
Framingham, MA 01701 USA
Corporate Center: 508-879-7330
Americas Professional Systems,
Technical Support: 800-994-2673
Australia
Bose Pty Limited
Unit 3/2 Holker Street
Newington NSW Australia
TEL 61 2 8737 9999
Belgium
Bose N.V. / S.A
Limesweg 2, 03700
Tongeren, Belgium
TEL (32) 012-390800
China
Bose Electronics (Shanghai) Co Ltd
36F West Gate Tower
1038 West Nanjing Road
Shanghai, P.R.C. 200041 China
TEL 86 21 6271 3800
France
Bose S.A.S
12 rue de Temara
78100 St. Germain en Laye, France
TEL 01-30-61-63-63
Germany
Bose GmbH
Max-Planck Strasse 36D 61381
Friedrichsdorf, Deutschland
TEL 06172-7104-0
Technical Information
Hong Kong
Bose Limited
Suites 2101-2105, Tower One, Times Square
1 Matheson Street, Causeway Bay, Hong Kong
TEL 852 2123 9000
India
Bose Corporation India Private Limited
Salcon Aurum, 3rd Floor
Plot No. 4, Jasola District Centre
New Delhi – 110025, India
TEL 91 11 43080200
Italy
Bose SpA
Centro Leoni A – Via G. Spadolini
5 20122 Milano, Italy
TEL 39-02-36704500
Japan
Bose Kabushiki Kaisha
Shibuya YT Building
28-3 Maruyama-sho
Shibuya-Ku, Tokyo, 150, Japan
TEL 81-3-5489-0955
www.bose.co.jp
The Netherlands
Bose BV
Nijverheidstraat 8 1135 GE
Edam, Nederland
TEL 0299-390139
United Kingdom
Bose House
Quayside Chatham Maritime
Chatham, Kent ME4 4QZ
TEL 44 (0)3330-142545
See website for other countries
Importer Information
European Union
Bose GP, Castleblayney Road, Carrickmacross, County Monaghan, Ireland
China
Bose Electronics (Shanghai) Company Limited, Part C, Plan 9, No. 353 North Riying Road, China (Shanghai)
Pilot Free Trade Zone
Taiwan
Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan
Mexico
Bose de México, S. de R.L. de C.V., Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000 México, D.F.
Installation Guide English 17
Page 18
Additional Information
pro.Bose.com
18 English
Installation Guide
Page 19
pro.Bose.com
Additional Information
Installation Guide English 19
Page 20
©2016 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM740742 Rev. 01
Loading...