PRELIMINARY TECHNICAL DATA SHEET
pro.Bose.com
F1 Model 812
Flexible Array Loudspeaker
Product Description
The Bose
portable loudspeaker that lets you control its vertical coverage pattern.
Simply push or pull the array into position to create “Straight,” “C”, “J”, or
“Reverse-J” coverage patterns. And once set, the system automatically
changes the EQ to maintain optimum tonal balance for each coverage
pattern. So whether you’re playing at oor level, on a stage, or facing raked
seats or bleachers, you can now adapt your PA to match the room.
Engineered with a exible array of eight high-output mid/high drivers, a
high-powered 12-inch woofer, a lower crossover point and 1,000-watt
amplifer, the loudspeaker delivers high SPL performance while maintaing
vocal and midrange clarity that’s dramatically better than conventional
loudspeakers.
Key Features
• FLEX array technology: Fexible bafe design that can be congured
• Vertically oriented 8-driver mid/high line array, with each driver mounted
• 12-inch high-performance LF driver provides strong low-frequency output
• Bi-amplied design with 2 high-output, Class-D ampliers to separately
• 2 input channels with independent volume controls and Line Level/Mic
®
F1 Model 812 Flexible Array Loudspeaker is the rst powered
into four unique shapes (“Straight”, “C”, “J” or “Reverse-J), allowing the
customer to choose the best possible coverage pattern for the application
on a custom 100° waveguide, helps deliver wide, consistent coverage
power the FLEX array 12-inch LF driver
switch on Channel 1
Applications
• Bands of all styles
• Solo musicians
• Mobile DJs
• Houses of worship
• Schools and universities
• Resorts and hospitality venues
• Business presentations
Mechanical Drawings
OF 3
1
PRELIMINARY TECHNICAL DATA SHEET
pro.Bose.com
F1 Model 812
Flexible Array Loudspeaker
Technical Specications
System Performance
System Type Self powered, two-way
Frequency Response (±3 dB)
Frequency Range (–10 dB) 48 Hz - 16 kHz
Nominal Dispersion 100° H x 40° V (C-position)
Maximum SPL @ 1 m 132 dB SPL (peak)
Crossover Frequency 600 Hz Acoustic 4th order Butterworth
Amplication
System Power 1000 W
Distortion at Rated Power 0.1 % Max (30 Hz - 15 kHz)
System Limiter Dynamic limiter
Power Indicator Blue LED: system on
Transducers
Driver Compliment 8 x 2.25" mid-high drivers; 1 x 12" LF
Channels
Signal Indicators POWER/FAULT, LIMIT, FRONT LED, SIGNAL INPUT
Input Connections Channel 1: XLR Balanced: Pin 1 (GND), Pin 2 (+), Pin 3 (-) Channel 2: 1/4” TS/TRS, 1∕8” TS/TRS, (2) RCA
Controls Volume level, Signal input select, Front LED function select, EQ select, Power on/off
Additional Connections
Line Output XLR balanced
AC Mains IEC Connector
Physical
Enclosure High impact composite materials
Grille Powder-coated perforated steel grille
Dimensions 26.1" H x 13.1" W x 14.6" D (664.66 x 334.3 x 372.5mm)
Net Weight 44.5 lbs (20.18 kg)
Power Supply Voltages
Universal AC power rating: 100-240 V 50 / 60 Hz +/- 20 %, 200 W max
55 Hz - 14 kHz
OF 3
2
PRELIMINARY TECHNICAL DATA SHEET
pro.Bose.com
F1 Model 812
Flexible Array Loudspeaker
Control Panel
1. POWER/FAULT – indicates power/fault status
• Blue = power on
• Red = fault condition
2. LIMIT – AMBER = system limiting
3. FRONT LED – selector switch that controls LED
• POWER enables front LED to indicate power status
• LIMIT engages a limiting display on the front LED
• OFF turns off the front LED
4. EQ
• FULLRANGE allows the loudspeaker to function without high-pass ltering
• WITH SUB engages a high-pass lter when using the loudspeaker with the F1 subwoofer
5. LINE OUTPUT – balanced XLR line output provides a mix of input 1 and 2. Can be used to daisy chain speakers together
6. POWER – on/off switch
7. AC – input connector
8. SIGNAL/CLIP – displays the input signal status in color
9. VOLUME – adjusts channel volume
10. SIGNAL INPUT – selector switch sets input sensitivity for input type. Connector accepts XLR or ¼” cable connections
11. MIC – selects sensitivity for mic inputs (dynamic or self-powered mics only) – use only when a mic is connected directly to
the input
12. LINE – selects sensitivity for line-level inputs, for example, from a mixer or DJ controller
13. RCA connectors – analog stereo input for audio sources such as DVD players, VCR players, video game consoles, DJ
mixers, keyboards and other instruments
14. ¼" phone connector – provides analog input for guitars and other instruments. Accepts TRS balanced or TS unbalanced
cables
OF 3
3
PRELIMINARY TECHNICAL DATA SHEET
pro.Bose.com
F1 Subwoofer
Product Description
With 1,000 watts of power, the Bose F1 Subwoofer packs all the
performance of a larger bass box into a more compact design that’s
easier to carry and ts in a car. A mounting stand for the Bose F1 Model
812 Flexible Array Loudspeaker is integrated right into the body of the
subwoofer, so you always know where it is, making setup fast and easy.
The stand even includes cable channels to neatly hide the wires, giving
your system a clean, professional look. And now getting your unit to the
venue is easier, too. The F1 Subwoofer features strategically placed
handles for easy transport.
Key Features
• 1,000 watts allow the Bose F1 Subwoofer to pack all the performance of
a larger bass box into a more compact design that’s lighter and easier to
carry than conventional subwoofers
• Two 10" high-excursion drivers built into a compact enclosure that is light
and easy to transport
• Polarity switch to adjust polarity of subwoofer. Selections are NORM
and REV. Reversing polarity allows for easy correction of low-frequency
overlap between the main loudspeaker and subwoofer
• Line output EQ sets the F1 Subwoofer’s output to a high-pass lter or full
range, which allows for easy crossover selection when used with a main
loudspeaker
• F1 Model 812 extension bracket is a unique bracket integrated into the
subwoofer. This bracket can be raised and lowered by the end user,
allowing the F1 Model 812 loudspeaker to be safely mounted to the
subwoofer. The bracket eliminates the need for a coventional pole mount
or tripod stand
Applications
• Bands of all styles
• Solo musicians
• Mobile DJs
• Houses of worship
• Schools and universities
• Resorts and hospitality venues
• Business presentations
Mechanical Drawings
OF 3
1
PRELIMINARY TECHNICAL DATA SHEET
pro.Bose.com
F1 Subwoofer
Technical Specications
System Performance
System Type Self powered
Frequency Response (±3 dB)
Frequency Range (–10 dB) 38 Hz - 115 Hz
Nominal Dispersion Omni-directional
Maximum SPL @ 1 m 132 dB SPL (peak)
Crossover Frequency 40 – 100 Hz Butterworth Bandpass, 100 Hz 4th order Butterworth HPF at Line Out
Amplication
System Power 1000 W
Distortion at Rated Power 0.1 % Max (30 Hz - 15 kHz)
System Limiter Dynamic limiter
Power Indicator Blue LED: system on
Transducers
Driver Compliment 2 x 10" high-excursion drivers
Channels
Signal Indicators POWER/FAULT, LIMIT, FRONT LED, SIGNAL INPUT
Input Connections 2 XLR - 1/4" Combo
Controls Volume level, Front LED function select, Power on/off, Polarity select, Line output EQ
Additional Connections
Line Output XLR balanced
AC Mains IEC Connector
Physical
Enclosure Wood cabinet with high impact composite end caps
Grille Powder-coated perforated steel grille
Dimensions 27” H x 16.1” W x 17.6” D (688 x 410.16 x 448.5mm)
Net Weight 55 lbs (24.9 kg)
Power Supply Voltages
Universal AC power rating: 100-240 V 50 / 60 Hz +/- 20 %, 200 W max
48 Hz - 100 Hz
Channels 1/2
OF 3
2
PRELIMINARY TECHNICAL DATA SHEET
pro.Bose.com
F1 Subwoofer
Control Panel
1. FRONT LED – selector switch that controls LED
• POWER enables LED to indicate power status
• LIMIT enables LED to indicate limiting
• OFF turns off LED
2. POWER/FAULT – indicates power/fault status
• Blue = power on
• Red = fault condition
3. LIMIT – AMBER = system limiting
4. SIGNAL/CLIP – displays the input signal status in color
• Green = signal present
• Red = signal clipping
5. VOLUME – adjusts output volume
6. LINE OUTPUT EQ
• THRU passes input signal to the output with no ltering
• HPF passes input through a high-pass lter
7. POLARITY
• NORM allows normal operation
• REV removes low-frequency overlap with the F1 Model 812 loudspeaker
8. LINE OUTPUT 1/2 – provides a balanced line output signal that can be sent to a powered loudspeaker or additional subwoofer
9. LINE INPUT 1/2 – combination XLR or ¼” connector that accepts line level inputs
10. AC – input connector
11. POWER – on/off switch
OF 3
3
F1 Flexible Array Loudspeaker System
Technical Education
Bose Pro Education Center
www.bosepro.education
Technical Outline
• General Specifications
• Vertical Dispersion
• Input / Output Specifications
• EQ Switches & Volume Controls
• Setup review
• Mounting Brackets
General Specifications
F1 Model 812 F1 Subwoofer
Weight (lb / kg)
Dimensions (HxWxD)
Max SPL
Horizontal Dispersion
Vertical Dispersion
(Straight | J | Reverse-J | C)
Frequency Response -3dB
Crossover Frequency
Amp Power @ 0.1 % Max (30
Hz - 15 kHz)
44.5 lbs (20.18 kg) 57.0 lbs (25.9 kg)
26.1“ H x 13.1" W x 14.6“ D (665 x 334 x 373mm) 27" x 16.1" x 17.6" (688 x 410 x 449mm)
132 dB 132 dB
100° Omni-directional
15° | 30° | 30° | 40° Omni-directional
52 Hz - 16 kHz 40 Hz - 100 Hz
40 - 100 Hz Bandpass
600 Hz
100 Hz Hi-Pass Filter at Line Out
1,000 Watts 1,000 Watts
AC Power Requirements
AC power rating: 100-240 V 50 / 60 Hz +/- 20 %, 200 W max
Vertical Dispersion
Vertical Dispersion Data
• The primary distinguishing feature of the F1
System is an adjustable vertical dispersion
• In the STRAIGHT configuration vertical
disper
sion is nominal (0°)
(0°)
Vertical Dispersion Data
• The primary distinguishing feature of the F1
System is an adjustable vertical dispersion
• In the STRAIGHT configuration vertical
disper
• In the “J” configuration the dispersion angle
belo
sion is nominal (0°)
w the horizontal plane increases to 20°
-20°
Vertical Dispersion Data
• The primary distinguishing feature of the F1
System is an adjustable vertical dispersion
• In the STRAIGHT configuration vertical
disper
• In the “J” configuration the dispersion an
below the horizontal plane increases to 20°
• In the “REVERSE-J” co
dispersion angle above the horizontal plane
increases to 20°
sion is nominal (0°)
nfiguration the
gle
+20°
Vertical Dispersion Data
• The primary distinguishing feature of the F1
System is an adjustable vertical dispersion
• In the STRAIGHT configuration vertical
disper
• In the “J” configuration the dispersion angle
belo
• In the “REVERSE-J” co
dispersion angle above the horizontal plane
increases to 20°
• In the “C” configuration the dispersion angle
is 20° bot
plane
sion is nominal (0°)
w the horizontal plane increases to 20°
nfiguration the
h above and below the horizontal
+20°
-20°
Vertical Dispersion Data
STRAIGHT Nominal (0°)
“J” +0/-20 degrees
“REVERSE J” +20/-0 degrees
“C” +20/-20 degrees
STRAIGHT
REVERSE-J
“J”
“C”
Input / Output
F1 Model 812 Input / Output Data
Input
Channel
Maximum Input Signal
Input Impedance
Controls
Output
Nominal
Maximum Signal
INPUT 1 INPUT 2
Combo Connector
XLR Balanced OR
¼” Plug (TRS Balanced OR
TS Unbalanced)
¼” TS/TRS,
(2) RCA
Gain
Signal
-Infinity to +34 dB (Line)
-Infinity to +54 dB (MIC)
+24 dBu (Line)
+18 dBu (MIC)
2.2 kΩ(MIC)
10 kΩ(Line)
Volume Volume
-Infinity to +26 dB(RCA)
-Infinity to +20 dB(1/4”)
+10 dBu (RCA)
+18 dBu (¼” Unbalanced)
+24 dBu (¼” Balanced)
10 kΩ(¼”)
10 kΩ(RCA)
OUTPUT
XLR Balanced: Pin 1 (GND), Pin 2 (+), Pin 3 (-)
+2.2 dBu
+24 dBu
F1 Subwoofer Input / Output Data
Input
Channel
Maximum Input Signal
Input Impedance
Controls
Output
Nominal
Maximum Signal
¼” Plug (TRS Balanced OR TS Unbalanced)
INPUT 1 & 2
Combo Connector
XLR Balanced OR
Gain
Signal
0 dB Gain: Line Input to Line Output
(Not affected by Volume setting)
+18 dBu (Unbalanced)
+24 dBu (Balanced)
Ω
10k
Single Volume for Combined Control
OUTPUT 1 & 2
XLR Balanced: Pin 1 (GND), Pin 2 (+), Pin 3 (-)
+2.2 dBu
+24 dBu
EQ Switches & Volume Controls
EQ Selector Switches
• F1 Model 812 EQ
• EQ applied to INPUT SIGNAL ONLY
• FULL RANGE = No EQ
• Performance down to 52Hz
• WITH SUB = 100Hz High Pass Filter
• F1 Subwoofer EQ
• EQ applied to OUTPUT SIGNAL ONLY
• THRU = No EQ
• HPF = 100Hz High Pass Filter
F1 Model 812 EQ
Set to FULL RANGE when…
• No subwoofer in system
• Signal goes through subwoofer
with
• Additional bass extension
High Pass Filter
Set to WITH SUB when…
• Subwoofer in system
• Signal goes through subwoofer
putti
• More balanced bass levels
• Independent sub level control
ng out FULL RANGE signal
F1 Subwoofer Line Output EQ
Set to THRU…
•All the time!
• Except…
Set to HPF…
• Connecting to High/Mid
Loudspeaker with no HPF
capability
Volume Controls
• F1 Model 812 EQ
• Volume DOES affect LINE OUTPUT level
• Individual Volume Controls for each input
• Knob @ 12 o’clock = 0 dB
• F1 Subwoofer EQ
• Volume DOES NOT affect LINE OUTPUT level
• Single Volume Control
• Knob @ 12 o’clock = 0 dB
Example Setups
Single F1 Model 812
Adding the F1 Subwoofer
Stereo F1 Model 812
Stereo F1 Model 812 w/ Single F1 Subwoofer
Stereo F1 System
Stereo F1 System
Mounting Brackets
Mounting Brackets
• U-bracket
• Pan-and-Tilt bracket
• Yo
ke bracket
U-Bracket
Pan-and-Tilt Bracket
Yoke Bracket
Mounting Brackets
• U-bracket and Pan-and-Tilt bracket similar to brackets for
RoomMatch Utility speakers
• Check pro.bose.com or the Bose Pro Education Center for the most
rec
ent versions of the installation guides
THANK YOU
Loading...