Bose build Speaker Cube User Manual

Bluetooth® button

Press to announce connected devices.
Press and hold to pair a new device.

Bluetooth indicator light

Blinking blue: Ready to pair
Solid white: Connected

Power/mode button

Press to select color mode.
Press and hold to turn the speaker cube off.
Press once to turn it back on.
Note: is button is only active when the
BOSEbuild Sound App is not connected.

Color slider

Selects color or speed for color modes.
Note: is slider is only active when the
BOSEbuild Sound App is not connected.

Coil connector

Connect the yellow coil here.

Speaker connector

Connect the speaker panel here.

Expansion connector

For future accessories.

Aux connector

Connect a 3.5 mm stereo audio cable here.

Power connector

Connect the included power supply here.

BOSEbuild™ Speaker Cube

Controls and connections

CONTROL PANEL – FRONT

CONTROL PANEL – BACK

e BOSEbuild Sound app includes step-by-step instructions for pairing and assembling your
speaker cube, as well as activities and tools that help you get the most out of your BOSEbuild
speaker cube. In addition, some features are available without using the app. e following
instructions describe using your speaker cube without the app.

Using your speaker cube without the BOSEbuild Sound app

Connecting to AC power

To use your BOSEbuild Speaker Cube, you must connect it to AC power.

1. Plug the small, round end of the power supply cord into the POWER connector on the

Control Panel.

2. Connect the power supply to an AC power outlet.

Turning voice prompts off/on

e BOSEbuild Speaker Cube features voice prompts to guide you through the pairing and
connecting processes. Voice prompts also announce the name of the currently connected
device(s).

If you prefer not to hear voice prompts, press and hold the Power/Mode button for 10 seconds.
You will hear confirmation that voice prompts are off. Repeat to turn voice prompts back on.

Note: is feature is only available when the BOSEbuild Sound app is not connected to the
speaker.

Playing music

Once your mobile device is connected, start a music app on the device to play music. You can
use the playback and volume controls on your device to control the music.

Pairing a mobile device

When you first power on the speaker, it is ready to pair with your mobile device. e Bluetooth
indicator blinks blue, and the voice prompt says, “Ready to pair your BOSEbuild Speaker Cube.”

1. On your mobile device, make sure Bluetooth is on. (e Bluetooth menu is usually found in

the Settings menu.)

2. Select your BOSEbuild Speaker Cube from your mobile device’s Bluetooth list.

e Bluetooth indicator glows solid white, and the voice prompt says, “Connected to
<device name>.”

Changing the speaker’s color

You can use the Power/Mode button and Color Slider to change the color of your speaker.
Note: is feature is only available when the BOSEbuild Sound app is not connected to the
speaker.

Press the Power/Mode button to switch between color modes. Use the slider to adjust the
appearance of each mode. Color modes appear in the following order:

1. Color Picker: e speaker glows a solid color. Use the slider to adjust the color.

2. Rainbow: e speaker scrolls through a rainbow of different colors. Use the slider to adjust
the speed.

3. Dancing Colors: e speaker lights up in response to music. Use the slider to adjust the
colors.

4. Color Off: e speaker’s RGB LEDs are off. Other features continue to operate as normal.

BOSEbuild Speaker Cube