Bose 363764-0010, AE2W, BA1, AE2 White User Manual

Bose® AE2w
Bluetooth® headphones
Owner’s Guide
Please read this owner’s guide
Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your system properly and enjoy its advanced features. Please save this guide for future reference.
WARNING: Contains small parts which may be a choking hazard. Not suitable for children under age 3.
WARNING: This product contains magnets which can be harmful to pacemaker wearers.
WARNING:
Contains small parts which may be a choking hazard. Not suitable for children under age 3.
This product contains magnets which can be harmful to pacemaker wearers.
• To reduce the risk of re or electrical shock, do not expose the
product to rain or moisture.
• Do not expose this apparatus to dripping or splashing, and do not place objects
lled with liquids, such as vases, on or near the apparatus. As with any elec-
tronic products, use care not to spill liquids into any part of the system. Liquids can cause a failure and/or a re hazard.
• Do not place any naked ame sources, such as lighted candles, on or near the
apparatus.
Use caution when using your headset/headphones while operating a vehicle or
engaging in any activity that requires your full attention. Check and follow local
laws regarding mobile phone and headphone/headset use. Some jurisdictions
impose specic limitations, such as single earpiece conguration, on the use of
such products while driving.
Sounds that you rely on as reminders or warnings may have an unfamiliar character when using headphones. Be aware of how these sounds may vary in character so you can recognize them as needed.
DO NOT use mobile phone adapters to connect headphones to airplane seat jacks as this could result in personal injury such as burns or property damage
due to overheating. Remove and disconnect immediately if you experience
warming sensation or loss of audio.
• Except in case of emergency, Bose recommends that you NOT use these
headphones as aviation communication headsets because:
- No incoming audio will be heard with a discharged or improperly installed battery. This could result in the potential of missed communications while piloting an aircraft.
- Extremely loud ambient noise levels common to many propeller-driven aircraft may impair your ability to receive incoming audio communications, particularly during takeoff and climb out.
- The Bose® AE2w Bluetooth® headphones are not engineered for noise conditions, altitude, temperature or other environmental conditions common in non-commercial aircraft, resulting in possible interference to critical com­munications.
• Do not submerge or expose for extended period to water or wear while partici-
pating in water sports, i.e. swimming, waterskiing, surng, etc.
Do not leave a battery on prolonged charge when not in use.
Bose Corporation hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC and all other applicable EU directive requirements. The complete declaration
of conformity can be found at: www.Bose.com/compliance.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Only use attachments/accessories specied by the manufacturer.
This device complies with FCC and Industry Canada RF radiation exposure limits set forth
for general population. It must not be co-located or be operating in conjunction with any other antenna or transmitter.
In the United States:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio com­munications. However, this is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, you are encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a different circuit than the one to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Changes or modications not expressly approved by Bose Corporation could void the
user’s authority to operate this equipment.
In USA and Canada:
This device complies with part 15 of the FCC rules and Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This class B digital apparatus complies with CAN ICES-3 B / NMB-3 B. Output power less than 6.3mW (8 dBm).
Other agency markings
FCC ID: A94BA1 IC: 3232A-BA1
Engineered in the United States Made in China
Meets IDA Requirements
Bose® AE2w
CAUTION:
Refer to the owners guide for safety related information.
Bluetooth headphones Model
BA1
• Make no modications to the system or accessories. Unauthorized alterations
may compromise safety, regulatory compliance, and system performance.
• Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume when using headphones, especially for extended
periods.
Use only with an agency approved power supply meeting local regulatory
requirements (ex. UL, CSA, VDE, CCC).
Refer to the power supply owner’s guide for safety related information.
Do not use headphones when operating a motor vehicle or anywhere the in-
ability to hear outside sounds may present a danger to you or others.
Do not drop, sit on or allow the headphones to be immersed in water.
Be sure the earcup ports are kept clear, and that no moisture is allowed to get
inside the earcup.
• The Bose AE2w Bluetooth headphones do not require scheduled cleaning.
Should cleaning be necessary, simply wipe the outside surfaces with a soft cloth.
Toxic or Hazardous Substances and Elements
Part Name Lead (Pb) Mercury (Hg) Cadmium (Cd) Metal parts X 0 0 0 0 0 Plastic
parts Speakers X 0 0 0 0 0 Cables X 0 0 0 0 0
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T 11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T 11363-2006.
Names and Contents of Toxic or Hazardous Substances or Elements
0 0 0 0 0 0
©2013 Bose Corporation. No part of this work may be reproduced, modied, distributed, or otherwise used without written permission.
2 - English
Hexavalent
(CR(VI))
Polybrominated
Biphenyl (PBB)
Polybrominated
diphenylether (PBDE)
Contents
Using the headphones ...................................................................................................................................... 4
Introduction.................................................................................................................................................................................................... 4
ank you ................................................................................................................................................................................................. 4
Included with the headphones ............................................................................................................................................................ 4
Control module features ...................................................................................................................................................................... 4
Charging the battery ..................................................................................................................................................................................... 5
Tips for longer battery life .................................................................................................................................................................... 5
Connecting the headphones to your Bluetooth device .......................................................................................................................... 6
To pair the headphones with your device ......................................................................................................................................... 6
Locating the Bluetooth device list ...................................................................................................................................................... 7
Battery charge level (for iOS devices) ................................................................................................................................................ 7
Pairing additional devices .................................................................................................................................................................... 7
Using multiple devices ......................................................................................................................................................................... 7
Wearing the headphones ............................................................................................................................................................................. 7
Recognizing the lights and tones............................................................................................................................................................... 8
Bluetooth Indicator .............................................................................................................................................................................. 8
Battery Indicator .................................................................................................................................................................................. 8
Audio Tones ............................................................................................................................................................................................ 8
Playback and phone call actions ................................................................................................................................................................. 8
Using the optional audio cable ................................................................................................................................................................... 9
To attach the audio cable ..................................................................................................................................................................... 9
Reference ............................................................................................................................................................10
Maintenance ................................................................................................................................................................................................... 10
Battery care ............................................................................................................................................................................................. 10
Cleaning the headphones ..................................................................................................................................................................... 10
Replacement parts and accessories ................................................................................................................................................... 10
Reattaching earcup cushions .............................................................................................................................................................. 11
Troubleshooting ........................................................................................................................................................................................... 11
Customer service ........................................................................................................................................................................................... 12
Limited Warranty ........................................................................................................................................................................................... 12
Technical information .................................................................................................................................................................................. 12
English - 3
Using the headphones
Introduction
ank you
We appreciate your choice of the Bose® AE2w Bluetooth® headphones. These wireless stereo headphones combine the audio performance and comfort you expect from Bose with the freedom to move away from your source.
Included with the headphones
Optional audio cable
Carry bag
Bluetooth® control module (removable)
Control module features
Multi-function button
Volume Up
Volume Down
Bluetooth indicator
Battery indicator
Power switch
USB charger connector
USB charging cable
4 - English
Using the headphones
Charging the battery
Although the battery is partially charged at the factory, we recommend you fully charge the battery before first use. Allow up to 3 hours for a full charge.
1. Plug the small end of the USB cable into the headphones.
2. Plug the large end of the USB cable into an agency approved wall USB charger (not supplied) or a powered USB port on your
computer.
Note: The control module can also be charged when disconnected from the headphone earcup.
Wall USB charger (not supplied)
Powered USB port on computer
3. Allow up to 3 hours for a full charge.
The battery indicator will blink amber while charging and turn green when charging is complete.
Battery Indicator Color Indicates:
Green (solid) • 1/2 hour to 7 hours remaining battery time
Amber (solid) • Less than 1/2 hour remaining battery time
Red (blinking) • Recharge headphones now
Amber (blinking) • Headphones are charging
Green (while charging) • Headphones are fully charged
Red (while charging) • Headphones are not within acceptable temperature range
Battery indicator
Note: The headphones will not operate while charging.
Note: Before charging, be sure the headphones are at room temperature, between 41°F (5°C) and 104°F (40°C).
Tips for longer battery life
When fully charged, your AE2w Bluetooth headphones will provide approximately 7 hours of wireless audio.
• Always slide the Power switch off when the headphones are not in use. This will help preserve battery life.
• Be aware that certain audio sources will deplete the battery more quickly than others.
• Do not leave the battery uncharged for long periods of time. Fully charge before storing.
English - 5
Loading...
+ 9 hidden pages