TECHNICAL DATA
PowerMatch® AmpLink
24-channel input card
Product Description
The Bose® AmpLink input card for PowerMatch® configurable professional
power amplifiers installs into the digital expansion slot to receive 24 digital
audio channels from a Bose DSP via a shielded CAT 5 cable. Each card
includes a THRU connection for daisy-chaining multiple AmpLink amplifiers.
Key Features
• AmpLink 24-channel digital audio transport.
• Quick-connect RJ-45 connections on shielded CAT 5 cable.
• Thru connection to daisy-chain up to 10 m between products.
• 3-position bank select switch chooses 8 consecutive AmpLink channels the
amplifier will amplify.
• Each daisy-chained amplifier can choose either the same, or a dierent,
bank of channels.
• AmpLink can daisy-chain up to 8 amplifiers.
• Any combination of AmpLink amplifiers can be daisy-chained.
Connector Panel
PROFESSIONAL
Applications
The PowerMatch AmpLink card enables
PowerMatch amplifiers to receive 24-channels
of digital audio sourced from a ControlSpace®
processor or through an upstream amplifier’s
AmpLink thru connection.
These cards allow for simplified audio
distribution when devices are co-located in the
same equipment rack, or in the same room.
Designed for a wide range of applications,
including:
• Performing arts venues
• Hotels and conferencing facilities
• Religious and worship facilities
• Health clubs
• Retail and shopping centers
• Sports venues
• Schools and universities
Technical Specifications
DIGITAL AUDIO
Channels Twenty-four (24), Each PowerMatch amplifer must select the bank of 8 consecutive channels the amplifier will amplify
Sample Rate / Bit Depth 48 kHz / 24 bit
Thru Audio Latency 24 ns
Maximum Cable Length
Connectors
SOFTWARE APPLICATION
ControlSpace® Designer™ Software v5.0 or later
GENERAL
Product Codes 772238-0110
Compatible With PowerMatch PM8500 / PM8500N configurable professional power amplifier
CAT 5 Cable Requirements Shielded cable required, TIA/EIA 568B wiring standard
Box Contents (1) expansion card, (1) installation guide
For additional specifications and application information, please visit pro.Bose.com. Specifications subject to change without notice
PRO.BOSE.COM 1 OF 1
from the 3-position slide switch. PM4250/N and PM4500/N must then choose the upper or lower 4 channels of that
bank in CSD software.
10 meters (33’) between products, shielded cable required
Input, Thru, using RJ-45 jacks on CAT 5 cables
PowerMatch PM8250 / PM8250N configurable professional power amplifier
PowerMatch PM4500 / PM4500N configurable professional power amplifier
PowerMatch PM4250 / PM4250N configurable professional power amplifier