Bosch VIPX 1600X FM4 User Manual

VIP X1600 XFM4

VIP-X1600-XFM4A/VIP-X1600-XFM4B

en Quick Installation Guide

VIP X1600 XFM4 General Information | en 2

!

1 General Information

These instructions "Quick Installation Guide" refer to encoder
modules VIP X1600 XFM4A and VIP X1600 XFM4B. The encoder
modules are intended for installation in the following devices:
– VIP X1600 XF base
– VIP X1600 B base
The VIP X1600 base is not supported.

CAUTION!

You should always make yourself familiar with the required
safety measures in the relevant chapters of the Installation and
Operating Manuals for the VIP X1600 XFM4 encoder module
and the base being used (see product CD in the scope of
delivery for the base being used). The manuals on the product
CD contain important information on the installation and
operation of the devices.
These instructions "Quick Installation Guide" only show the
basic installation of a VIP X1600 XFM4A or VIP X1600 XFM4B
encoder module, they are no substitute for the complete user's
manual.

You can find further detailed information in the extensive online
help for the device in question.
Additional language versions of these instructions "Quick
Installation Guide", the Installation and Operating Manuals for
the VIP X1600 XFM4 encoder module and the base being used,
as well as the 4.0 firmware are available on
www.boschsecurity.com.

Bosch Security Systems Quick Installation Guide F.01U.088.580 | V4.0 | 2009.03

3 en | Scope of Delivery VIP X1600 XFM4

2 Scope of Delivery

– VIP X1600 XFM4A or VIP X1600 XFM4B encoder module

– Two terminal blocks
– Four screws for installation in the base
– Quick Installation Guide

F.01U.088.580 | V4.0 | 2009.03 Quick Installation Guide Bosch Security Systems

VIP X1600 XFM4 Unpacking | en 4

3 Unpacking

– Please check the delivery for completeness and integrity.
– Have your device checked by Bosch Security Systems if

you detect any damage!

Bosch Security Systems Quick Installation Guide F.01U.088.580 | V4.0 | 2009.03