Bosch VG4-524-ETS0P, VG4-524-CCE, VG4-524-ECS0CF, VG4-524-ECS1W, VG4-524-ETE1W Specsheet

...

Video | AutoDome 500i Series Intelligent PTZ Camera System

AutoDome 500i Series Intelligent PTZ Camera System

www.boschsecurity.com

u Fully interchangeable CPUs, cameras, housings,

communications, and mounts

Bosch’s AutoDome modular camera system is a revolutionary new concept in dome cameras. More than just a series of cameras, it’s a dome platform built around a system of intelligent, interchangeable modules that allow you to update camera functionality quickly and cost-effectively. Using common components lets you install a basic camera system today and migrate to a more advanced version tomorrow – without having to replace the entire dome, thus protecting your initial investment.

Interchangeable modules

The entire AutoDome system is based on five interchangeable modules: the CPU, camera, housing, communications, and power supply. Simply swap one of AutoDome’s interchangeable modules and quickly upgrade from analog to IP, color to day/night, or add motion detection, image stabilization, and AutoTrack. Never before have you had the ability to adapt a security system to your changing needs this quickly or inexpensively. By using the same housing components, all installations have a consistent look, and observers have no idea which type of camera (if any) is watching

u Choice of 540 TVL 36x day/night night camera with

128x wide dynamic range or 26x and 18x day/night cameras

u AutoTrack II automated motion tracking

u Video motion detection

u Optional IP connectivity using H.264 and JPEG

over them. This unique, modular design also gives you the flexibility to move cameras between different housings when special coverage is needed, or as site plan requirements change. For example, an 18x PTZ camera over a specific area could easily be “hotswapped” to a 26x or 36x day/night without removing the power. AutoDome’s Ethernet communications module allows you to add IP functionality while maintaining connectivity to existing analog inputs and outputs.

500i Series highlights

AutoDome 500i Series adds real intelligence to your video surveillance applications. Equipped with AutoTrack II the latest version of Bosch’s awardwinning motion tracking software, built-in image stabilization, motion detection, and a sophisticated alarm handling “rules” engine, the AutoDome 500i Series incorporates advanced, intelligent video features unmatched by any other camera system. The AutoDome 500i Series supports a variety of standard and optional video and data transmission methods, including Bilinx (over coax and UTP), fiber, and even TCP/IP over Ethernet. Remote control,

| AutoDome 500i Series Intelligent PTZ Camera System

configuration, and firmware updates can also be performed over these cables, offering you unparalleled control of your cameras. Cable compensation provides extended coaxial and UTP distance runs while preventing the image quality degradation caused by signal losses from long cable lengths. The optional IP Communications Module has hybrid functionality to protect your current analog technology investment while providing a clear and stable migration path to fully digital, IP-based solutions. This allows you to move to IP video at your own pace – all at once or one camera at a time. And since all AutoDome modules are completely interchangeable, there is no need to replace expensive components (e.g., cameras) or labor-intensive components (e.g., mounts and housings).

Functions

The following are some of the features that make the AutoDome 500i Series the most flexible PTZ dome camera systems in the security industry.

High-performance PTZ day/night cameras

Image control and quality are integral aspects of any PTZ dome system, and the AutoDome delivers. The 500i Series is available with a choice of 18x, 26x, and the industry-leading 36x optical zoom lens, and all 500i Series systems offer a full 12x digital zoom. The 18x and 26x cameras provide 470 TVL (NTSC) or 480 TVL (PAL), and the 36x camera provides a full 540 TVL of horizontal resolution for outstanding clarity and image detail. The 36x camera also incorporates technology that dramatically improves the dynamic range by 128 times. Also known as WDR (wide-dynamic range), it results in clear image reproduction in extreme highcontrast environments. The AutoScaling (proportional zoom) and AutoPivot (automatically rotates and flips the camera) features ensure optimal control. Day/night capabilities and outstanding sensitivity make 500i Series cameras exceptional performers in all lighting conditions. In low light, these cameras automatically switch from color to monochrome by removing the IR filter to boost the infrared illumination sensitivity, while maintaining superior image quality. For operation in the darkest conditions, the SensUp control feature automatically reduces the shutter speed to as little as one second. This increases sensitivity by more than 50 times. With super-quick, 360° per-second pan and tilt speeds, the AutoDome 500i Series outperforms other domes in its class. The 500i Series supports 99 pre-positions and two styles of Guard Tours: Preset and Record/ Playback. The preset tour has capability for up to 99 pre-positions with a configurable dwell time between pre-positions, and can be customized as to the order and frequency each preset is visited. AutoDome 500i Series also provides support for two recorded tours, which have a combined duration of 15 minutes of

movements. These are recorded macros of an operator’s movements, including pan, tilt, and zoom activities, and can be played back in a continuous manner. Supported menu languages include: English, French, German, Spanish, Portuguese, Italian, Dutch, and Polish.

AutoTrack II

Bosch introduced the industry’s first automated motion tracking system, and now we’ve made this award-winning technology even better. The AutoDome 500i Series contains an advanced DSP that provides real-time video processing for incredibly smooth object tracking. AutoTrack II utilizes Bosch’s unique “virtual masking” technology. These “invisible” masks are created to act just like privacy masks, except that only the AutoTrack can see them – and it knows to ignore any motion behind them. This enables the AutoTrack to ignore extraneous background motion, such as a tree blowing in the wind, making it ideal for both indoor and outdoor applications.

Video motion detection (VMD)

With AutoDome, you can create a “region of interest” within a preset position where motion is to be detected. The AutoDome 500i Series supports a total of 10 individual regions of interest (one per preposition). VMD also takes advantage of virtual masking to ignore areas of unwanted motion.

Image Stabilization

As PTZ cameras continue to improve their optical zoom capabilities, image stabilization becomes critical to eliminate movement caused by unstable camera mounts. A mere quarter-inch of movement of the camera mount can shift the field of view by more than 20 feet when the camera is zoomed to a high value. This can render images unusable. Image stabilization algorithms included with the AutoDome 500i Series reduces camera shake in both the vertical and horizontal axis, resulting in exceptional image clarity (pixel displacement up to +/10% for frequencies up to 10 Hz). Bosch’s unique image stabilization solution does not reduce camera sensitivity, unlike competitive systems.

Alarm management

The AutoDome 500i Series takes alarm handling to new levels of flexibility and power.

Inputs and outputs

The AutoDome 500i Series can handle seven alarm inputs, two of which are analog inputs that can be programmed for EOLR (End-of-Line Resistor) supervision whenever true security applications require it. These inputs enable the dome to “sense” if the contact is opened or closed and whether the wire has been tampered with (either by being cut or shorted). In addition, the AutoDome 500i Series supports four outputs: one relay rated at two amps

| AutoDome 500i Series Intelligent PTZ Camera System

and three additional open collectors for driving external devices. Each can be programmed individually.

Advanced alarm control

This new concept in flexibility goes beyond simple alarm handling. Advanced alarm control uses sophisticated rules-based logic to determine how to manage alarms. In its most basic form, a “rule” could define which input(s) should activate which output(s). In a more complex form, inputs and outputs can be combined with pre-defined or user-specified keyboard commands to perform advanced dome functions. There is virtually no limit to the number of combinations that you can program, making the standard software in the dome ready for any application.

Superior privacy masking

The AutoDome 500i Series allows for a total of 24 individual privacy masks, with up to eight displayed in the same scene. Unlike conventional privacy masks, these can each be programmed with three, four, or even five corners to cover more complex shapes. Each mask changes size and shape smoothly and quickly – ensuring that the covered object cannot be seen. You also have a choice of colors: black, white, and blurred. Blurred comes in handy when privacy is an issue, but determining the presence of motion is still required.

Optional hybrid analog/IP operation

AutoDomes equipped with the optional TCP/IP Communications Module use an advanced H.264 encoder to create DVD-quality streaming video across a local or a wide area network, and can simultaneously stream CVBS video via coaxial cabling to support existing analog equipment. Network video streams are sent over IP networks and can be viewed with the Bosch Divar XF Digital Video Recorder, or on a PC running VIDOS video management software. Alternatively, a Bosch IP video decoder can be used to display the video on an analog CVBS or VGA monitor. For maximum accessibility, the video can be viewed using a web browser.

Tri-streaming video

Bosch’s innovative tri-streaming feature enables AutoDomes equipped with the optional IP Communications Module to generate independent streams simultaneously. This feature allows you to stream high-quality images for live viewing while recording at a reduced frame rate, and at the same time, stream images to a remote PDA device.

Unsurpassed reliability

All housings feature recessed screws and latches for increased tamper resistance. AutoDome pendant housings (indoor and outdoor) are rated to provide IP 66 protection. In addition, the pendant housings come equipped with a low-impact, high-resolution acrylic bubble for enhanced image clarity

AutoDome in-ceiling housings are rated IK 8 (IEC 62262). These housings feature an impactresistant polycarbonate Rugged Bubble to protect your camera from vandalism. The Rugged Bubble can withstand impacts equivalent to a 4.5 kg (10 lb) weight dropped from a height of 3 m (10 ft). Outdoor EnviroDome housings provide an operating temperature range down to -40°C (-40°F). The optional “XT” extreme temperature kit allows an AutoDome to operate in temperatures down to -60°C (-76°F), ensuring reliable operation in even the harshest environments. The Pressurized Environmental Housing is rated to provide IP 67 protection for a VG4 Series AutoDome

Modular Camera System from the elements, both natural and manmade. It is the ideal surveillance solution for applications that require frequent washdown, including traffic, transit, bridges, tunnels and coastal installations where salt, moisture, dust, insects and fumes threaten the long-term operation of the camera.

Ease of installation and servicing

Bosch’s innovative software, the Configuration Tool for Imaging Devices (CTFID), allows operators or technicians to control the PTZ, change camera settings, and even update firmware from virtually anywhere without need for additional wiring. For the new Ethernet versions, an embedded Web server lets the installer access all the user settings, make camera adjustments, and update firmware via a standard Web browser. AutoDome’s innovative design simplifies installation and servicing. AutoDome reduces maintenance costs because you can replace individual modules instead of entire camera assemblies. Simply pop out the old module and slide in the new: it’s almost as easy as changing a light bulb. All tethers have been replaced with hinges, making installation and servicing safer and easier. You can even access the built-in power supply without taking down the dome. The AutoDome 500i Series has advanced built-in diagnostics to simplify service and minimize downtime. Using the On Screen Display (OSD), a technician can quickly and easily check critical parameters (such as internal temperature and input voltage level) to verify that the dome is functioning within acceptable operating limits. If video is not present, a local inspection of three diagnostic LEDs at the camera site can identify the presence of video and control data.

Feature Comparison Matrix

The following table provides an overview of the AutoDome camera family and its available features:

Preset Shots 64 99 99

High Speed PTZ

Interchangeable Modules

Day/Night Operation

High Resolution Camera

Alarm Inputs 7/4 7/4

Guard Tour

SensUp Extended Sensitivity

IR Sensitive

Cable Compensation

Bilinx Remote Conﬁguration*

Hybrid Analog/IP Connectivity

UTP/Coax Transmission

Ruggedized, Vandal-Resistant Enclosure

Hot-Swap Camera Modules

Image Stabilization

Video Motion Detection

AutoTrack II Motion Tracking

Advanced Features

Advanced Alarm Control

Privacy Masking and Sector Blanking

AutoDome 100 Series

AutoDome 200 Series

AutoDome 300 Series

AutoDome 500i Series

Standard Features

Preset Tour

VG4

- -

4 | AutoDome 500i Series Intelligent PTZ Camera System

*Compatible over Coax and UTP transmission only. Remote configuration over IP via web

interface.

Certifications and approvals

Electromagnetic Compatibility (EMC)

Complies with FCC Part 15, ICES-003, and CE regulations, including EN50130-4 and EN50121-4

Product Safety Complies with CE regulations, UL, CSA, EN,

and IEC Standards

C In-ceiling

R Roof

P Indoor Pendant P Pipe

E Outdoor Pendant _ No Mount

4 Bubble 8 Fiber Optics

C Clear _ No Fiber

T Tinted F Fiber

5 Communications

S Standard Analog (Coax/

UTP)

E Ethernet (TCP/IP)

1 No transformer included. Customer must supply an approved 24 VAC limited power

supply (VG4-A-PSUx or equivalent).

2 Recessed in-ceiling housing units do not require kit options for reference numbers 6, 7,

or 8.

3 Fiber optic option is multi-mode with biphase. Requires LTC 4629 at the system.

4 Roof mount mounts to vertical Parapet. For flat roof installation, order an additional

LTC 9230/01 Flat Roof Adapter Plate.

5 Optional trim skirt available as a separate purchase.

Technical specifications

Camera 36x Day/Night

Region Certification

Europe CE EMC Directive, Low-Voltage Directive

Installation/configuration notes

Ordering Information

1 Video Format 6 Power

1 PTZ PAL 0 24 VAC

2 PTZ NTSC 1 120 VAC

2 Camera Type 2 230 VAC

2 18x Day/Night PTZ 7 Mount

3 26x Day/Night PTZ W Wall

4 36x Day/Night PTZ M Mast

3 Enclosure C Corner

Imager 1/4 in. Exview HAD CCD

(752 x 582 PAL)/(768 x 494 NTSC)

Lens 36x Zoom (3.4 –122.4 mm)

F1.6 to F4.5

Focus Automatic with manual override

Iris Automatic with manual override

Field of View 1.7° to 57.8°

Video Output 1.0 Vp-p, 75 Ohm

Gain Control Off/Auto (with adjustable limit)

Synchronization Line-Lock (–120° to 120° vertical phase

adjust) or internal crystal

Aperture Correction Horizontal and vertical

Digital Zoom 12x

Horizontal Resolution 540 TVL (NTSC, PAL) typical

Sensitivity (typical)

Day Mode

SensUp Off 0.66 lx 1.4 lx

SensUp On (1/4)

(15x)

Night Mode

SensUp Off 0.166 lx 0.33 lx

SensUp On (1/4)

(15x)

30 IRE 50 IRE

0.033 lx 0.083 lx

0.0065 lx 0.0164 lx

| AutoDome 500i Series Intelligent PTZ Camera System

Electronic Shutter Speed 1 to 1/10,000

SNR >50 dB

White Balance 2000 K to 10,000 K

6 F1.6, 1/60 (1/50) shutter, max AGC.

Camera 26x Day/Night

Imager 1/4 in. Exview HAD CCD

(752 x 582 PAL)/(768 x 494 NTSC)

Lens 26x Zoom (3.5 –91.0 mm)

F1.6 to F3.8

Focus Automatic with manual override

Iris Automatic with manual override

Field of View 2.3° to 55°

Video Output 1.0 Vp-p, 75 Ohm

Gain Control Off/Auto (with adjustable limit)

Synchronization Line-Lock (–120° to 120° vertical phase

adjust) or internal crystal

Aperture Correction Horizontal and vertical

Digital Zoom 12x

Horizontal Resolution NTSC: 470 TVL, typical

PAL: 480 TVL, typical

Sensitivity (typical)

30 IRE 50 IRE

Gain Control Off/Auto (with adjustable limit)

Synchronization Line-Lock (–120° to 120° vertical phase

adjust) or internal crystal

Aperture Correction Horizontal and vertical

Digital Zoom 12x

Horizontal Resolution NTSC: 470 TVL, typical

PAL: 480 TVL, typical

Sensitivity (typical)

30 IRE 50 IRE

Day Mode

SensUp Off 0.4 lx 0.7 lx

SensUp On (15x) 0.0041 lx 0.0082 lx

Night Mode

SensUp Off 0.05 lx 0.17 lx

SensUp On (15x) 0.0007 lx 0.0013 lx

Electronic Shutter Speed 1 to 1/10,000

SNR >50 dB

White Balance 2000 K to 10,000 K

8 F1.4, 1/60 (1/50) shutter, max AGC.

Mechanical/Electrical

Model In-Ceiling Indoor

EnviroDome®

Pendant

Day Mode

SensUp Off 0.5 lx 1.0 lx

SensUp On (15x) 0.0052 lx .013 lx

Night Mode

SensUp Off 0.10 lx 0.26 lx

SensUp On (15x) 0.0013 lx 0.0026 lx

Electronic Shutter Speed 1 to 1/10,000

SNR >50 dB

White Balance 2000 K to 10,000 K

7 F1.6, 1/60 (1/50) shutter, max AGC.

18x Day/Night

Imager 1/4 in. Exview HAD CCD

(752 x 582 PAL)/(768 x 494 NTSC)

Lens 18x Zoom (4.1 –73.8 mm)

F1.4 to F3.0

Focus Automatic with manual override

Iris Automatic with manual override

Field of View 2.7° to 48°

Weight 2.66 kg

(5.86 lb)

2.88 kg (6.3 lb)

3.32 kg (7.3 lb)

Pan Range 360° cont. 360° cont. 360° cont.

Tilt Angle 1° above

horizon

Variable

0.1°/s-120°/s 0.1°/s-120°/s 0.1°/s-120°/s

18° above horizon

Speed

Pre-position Speed

Preset

Pan: 360°/s Tilt: 100°/s

± 0.1° typ. ± 0.1° typ. ± 0.1° typ.

Accuracy

Power 21-30 VAC

50/60 Hz

21-30 VAC 50/60 Hz

Power Draw: (typ)

Analog

15 W 15 W 51 W

Models

Ethernet

19 W 19 W 55 W

Models

9 Add 16 W if using VG4-SHTR-XT kit.

Video Output 1.0 Vp-p, 75 Ohm

6 | AutoDome 500i Series Intelligent PTZ Camera System

Surge Suppression

Protection on Video

Protection on

Peak current 10 kA (Gas Tube Arrester), peak power 1000 W (10/1000 μ)

Peak current 10 A, peak power 300 W (8/20 μ) RS-232/485, Biphase

Protection on

Peak current 17 A, peak power 300 W (8/20 μ) Alarm Inputs

Protection on

Peak current 2 A, peak power 300 W (8/20 μ) Alarm Outputs

Protection on Relay Outputs

Protection on Power Input

Peak current 7.3 A, peak power 600 W

(10/1000 μ)

Peak current 7.3 A, peak power 600 W

(10/1000 μ) (Dome)

Protection on Power Output

Peak current 21.4 A, peak power 1500 W

(10/1000 μ) (Arm Power Supply)

Environmental

Model In-Ceiling Indoor

Pendant

Design

Plenum Rated IP66 IP66

Rating

Operatin g Temp.

Storage Temp.

Humidity 0% to 90%

-10°C to 40°C (14°F to 104°F)

–40°C to 60°C (–40°F to 140°F)

relative, noncondensing

-10°C to 40°C (14°F to 104°F)

–40°C to 60°C (–40°F to 140°F)

0% to 90% relative, noncondensing

EnviroDome®

–40°C to 50°C (–40°F to 122°F)

–40°C to 60°C (–40°F to 140°F)

0% to 100% relative, condensing

Cable Compensation

Max Distance With Pre-comp OFF With Pre-comp ON

RG-59/U 1000 ft (300 m) 2000 ft (600 m)

RG-6/U 1500 ft (450 m) 3000 ft (900 m)

RG-11/U 2000 ft (600 m) 4000 ft (1200 m)

Cat 5/UTP

750 ft (225 m) 1500 ft (450 m)

(Passive receiver)

User Connections

Power (Camera) 21-30 VAC, 50/60 Hz

Power (Heater) 21-30 VAC, 50/60 Hz

Biphase ± Control Data

Audio Line In

9 K Ohm typ, 5.5 Vp-p max

RS-232 RX/TX or RS-485 ± - optional control data (dip switch selectable)

Video BNC/UTP

EOLR Alarm Inputs (2) Programmable for

“normally open”, "normally closed", “normally open-supervised”, “normally closed-supervised”

Alarm Inputs (5) Programmable for

“normally open” or "normally closed"

Relay Out (1) Dry contact output rating:

2 A @ 30 VAC

Open Collector Outputs

32VDC@150 ma max

(3)

11 With Ethernet models, the biphase ± can optionally be used as the audio line in

connector.

12 Ethernet models have no UTP analog output only BNC (coax).

Mounts/Accessories

Miscellaneous

Sectors/Titling 16 independent sectors with 20-character titles/

sector

Camera Setup/

Biphase, RS-232, RS-485, Bilinx10 (coax)

Control

Communication

Biphase, Bilinx10, Pelco P, and Pelco D

s Protocols

Pre-positions 99, each with 20-character titles

Guard Tours Two (2) types of tours:

• Recorded tours - two (2), total duration 15 minutes

• Preset tour - one (1), consisting of up to 99 scenes, consecutively and (1) customized up to 99 scenes

Supported Languages

10 Bilinx not available on Ethernet models.

Czech, Dutch, English, French, German, Italian, Polish, Portuguese, Russian and Spanish

Pendant Arm Mounts

Wall Arm (No Transformer) VG4-A-PA0

Wall Arm (120/230 VAC Transformer) VG4-A-PA1 /

VG4-A-PA2

Wall Arm (120/230 VAC Transformer and Fiber Optics)

VG4-A-PA1F / VG4-A-PA2F

Optional Mounting Plates for Arm Mounts

Corner Mounting Plate VG4-A-9542

Mast (Pole) Mounting Plate VG4-A-9541

Pendant Pipe Mounts

Pipe Mount Cap VG4-A-9543

Pendant Roof Mounts

Roof (Parapet) Mount VG4-A-9230

Optional Mounting Plates for Roof Mounts

7 | AutoDome 500i Series Intelligent PTZ Camera System

Flat Roof Adapter for Parapet Mount LTC 9230/01

Power Supplies

Outdoor Power Supply Box (120/230 VAC Transformer)

Outdoor Power Supply Box (120/230 VAC Transformer and Fiber Optics)

Extended temp heater module extends temperature range to – 60°C (–76°F) for EnviroDome® only

Fiber Optic Models

Optical Fiber Compatibility

Max Distance 4 km (2.5 miles)

50/125 mm, 62.5/125 mm, low loss multimode glass fiber, rated for a minimum system bandwidth of 20 MHz (video 850 nm/Control 1300 nm)

VG4-A-PSU1 / VG4-A-PSU2

VG4-A-PSU1F / VG4-A-PSU2F

VG4-SHTR-XT

+ 14 hidden pages