Video | VEI-30 Dinion Infrared Imager
VEI-30 Dinion Infrared Imager
u Certified all-weather active IR surveillance camera
specifically designed for perimeter surveillance and
other outdoor low-light applications
u Dinion 2X imaging with wide dynamic capability to
handle the most demanding lighting situations
u Variable Field Illumination technology provides
unmatched low-light and no-light performance
u Integrated junction box, remote control, and
complete external adjustments minimize installation
time and cost
The Dinion Infrared Imager is a rugged, active infrared
surveillance camera designed to master perimeter
surveillance and other outdoor low-light applications.
The IR Imager provides best-in-class images day and
night covering up to 160 meters (525 feet) with
unrivaled illumination quality throughout the field of
view.
From the most challenging daylight conditions to zero
lux night environments, the VEI-30 gives you the
details you need. Our Dinion 2X technology provides
optimal 20-bit imaging in natural and artificial light,
giving you a powerful wide dynamic range camera
solution capable of handling the most demanding
lighting situations, 24 hours a day.
Variable Field Illumination allows IR beam pattern
adjustments in the field, allowing for wide area
coverage and greatly reducing maintenance and setup
time and effort. Variable Field Illumination also
provides even illumination not only across the field of
view but also from foreground to background. To
ensure this performance never fades over time, the IR
Imager features Constant Light technology, using
closed loop feedback to control infrared performance
throughout the life of the unit.
The IP67-rated junction box and the camera can be
hung and connected in seconds, reducing time and
energy on the ladder. The Bilinx (up-the-coax) remote
control further reduces time needed for adjustments
during and after installation by allowing for
adjustments to be made remotely on the ground.
Functions
DCRI Zero Lux Performance
850 nm 940 nm
Range Horizontal
Detectio
n
Classific
ation
Recognit
ion
Identific
ation
160 m
(525 ft)
120 m
(390 ft)
90 m
(295 ft)
50 m
(165 ft)
Field of
Illumination
28 m
(90 ft)
21 m
(70 ft)
16 m
(50 ft)
9 m
(30 ft)
Range Horizontal
80 m
(260 ft)
60 m
(195 ft)
45 m
(150 ft)
25 m
(80 ft)
Field of
Illumination
14 m
(45 ft)
10 m
(35 ft)
8 m
(25 ft)
4 m
(15 ft)
2 | VEI-30 Dinion Infrared Imager
Note: DCRI values given are with narrow IR beam
configuration at maximum focal length.
Dinion Integrated Imaging – reveal every detail
• More detail in difficult lighting featuring superior
120dB (20-bit image processing) wide dynamic range
• 24/7 performance around the clock with 2X image
processing that dynamically adapts to scene changes
in addition to infrared illumination compensation
High Performance Illumination
• Variable Field Illumination allows wider area coverage
for even illumination across the field of view and from
foreground to background
• Constant Light technology ensures consistent imaging
throughout the life of the product
• 850 nm and 940 nm infrared wavelength options
Installer-Friendly Features
• Lightweight junction box can be preinstalled to
minimize time “on the ladder”
• Integrated OSD, complete external adjustment, and
Bilinx remote control reduces service and installation
time
Ready for All Environments
• IP67 – dust proof and protection against temporary
submersion
• NEMA4X – all weather rated and corrosion resistant
• EN60068-2-6 – shock and vibration tested
• IK10 – impact resistant (except for window)
• MIL-STD-810F1 – tested to operate in conditions
exceeding A1 environments (harshest desert
classification) for exposure to solar radiation
1. Long term continuous exposure in worst case conditions can impact component life.
Impact Resistance IK10 (except window)
Solar Radiation Tested for MIL-STD-810F (for A1 environments)
Installation/Configuration Notes
Canting Directions
Camera Rotated 90° Left, Tilted 44° Up
Certifications and Approvals
Region Classification
Europe CE (Declaration of Conformity)
USA UL, FCC
Canada CSA
Australia C-Tick
Electromagnetic Compatibility
Emission EN55022 class B, FCC part 15 class B,
Immunity EN50130-4 (CE), EN6100-6-3 (CE)
Safety
UL60065-07, CAN/CSA 60065-03, EN60065 (CE)
Environmental
Weatherproofing IP67, Type 4X (NEMA 4X), CSA 22.2 No. 94-
Shock Half-sine wave impulses, 15 ± 3 g for 6 ± 1.1 ms
Vibration 50 to 150 Hz at 5 m/s
EN6100-3, IC ICES-03
M91, UL 50
2
Camera Rotated 90° Right, Tilted 48° Down
Use Cases
1 Horizontal Angle (H)
2 Vertical Angle (V)
3 Horizontal Field of Illumination (HFOI) /
Horizontal Field of View (HFOV)
3 | VEI-30 Dinion Infrared Imager
4 Depth of Field (DoF) Range
5 Distance
General Area Surveillance: RECOGNITION
IR Beam Pattern
(Full Width Half Maximum)
Camera Focal Length; FOV
2
2
43° x 20°
6 mm focal length; 44° x 33°
DoF Range 5–23 m (16–75 ft)
3
HFOI
HFOV
3
17 m (56 ft)
17 m (56 ft)
Critical Asset and Entry/Exit Monitoring:
RECOGNITION
IR Beam Pattern
(Full Width Half Maximum)
Camera Focal Length; FOV
2
2
10° x 10°
24 mm focal length; 11° x 9°
DoF Range 23–90 m (75–300 ft)
3
HFOI
HFOV
3
16 m (53 ft)
17 m (56 ft)
Perimeter Monitoring (100 m/330 ft zone spacing):
RECOGNITION/CLASSIFICATION
IR Beam Pattern
(Full Width Half Maximum)
Camera Focal Length; FOV
2
2
10° x 10°
20 mm focal length; 14° x 10°
DoF Range 20–120 m (65–400 ft)
3
HFOI
3
HFOV
2. Measurements are H x V.
3. At maximum range.
21 m (69 ft)
29 m (95 ft)
VEI-309V05-13W 12 VDC/24 VAC (± 10%) 50 Hz
VEI-309V05-23W 12 VDC/24 VAC (± 10%) 60 Hz
Power Consumption
• at 12 VDC 35 W (2.9 A)
• at 24 VAC 35 W (1.5 A)
Sensor
CCD Type 1/3-in. interline, WDR dual shutter
Active Pixels: PAL: 752 x 582
NTSC: 768 x 494
Sensitivity (3200 K, scene reflectivity 89%, F1.2)
Full video
(100 IRE)
Color 2.4 lx
(0.223 fc)
Color
+ SensUp 10x
0.24 lx
(0.0223 fc
Usable picture
(50 IRE)
0.47 lx
(0.044 fc)
0.047 lx
(0.0044 fc)
Usable picture
(30 IRE)
0.15 lx
(0.0139 fc)
0.015 lx
(0.0014 fc)
)
Monochrome 0.98 lx
(0.091 fc)
Monochrome
+ SensUp 10x
0.098 lx
(0.0091 fc
0.188 lx
(0.0174 fc)
0.019 lx
(0.0017 fc)
0.06 lx
(0.0056 fc)
0.006 lx
(0.0006 fc)
)
Monochrome
+ IR Illumination
0 lx
(0 fc)
0 lx
(0 fc)
0 lx
(0 fc)
Interfaces
Analog (video) PAL or NTSC BNC
Fiber Optic interface (with accessory)
On-screen Display OSD with soft-key operation (multilingual)
Parts Included
Quant. Component
1 VEI-30 Dinion Infrared Imager
1 Cable-managed pan/tilt bracket
1 Junction box
1 Sunshield
1 Installation kit
Technical Specifications
Electrical
Model No. Rated Voltage Rated
Frequency
VEI-308V05-13W 12 VDC/24 VAC (± 10%) 50 Hz
VEI-308V05-23W 12 VDC/24 VAC (± 10%) 60 Hz
Alarm Output Relay 30 VAC or +40 VDC, max. 0.5 A
continuous, 10 VA
Tamper: Open/close, normally closed
voltage free relay
Analog Remote Control Bilinx coaxial bi-directional communication
Video
Horizontal Resolution 540 TVL
Signal-to-Noise Ratio >50 dB
Video Output Composite video 1 Vpp, 75 ohm
Synchronization Internal, Line Lock
Shutter Auto (1/50 [1/60] to 1/10000) selectable
Auto (1/50 [1/60] to 1/50000) automatic
flickerless, fixed selectable
Sensitivity up Adjustable from Off up to 10x
Day/Night Color, Mono, Auto Video, Auto Photocell
4 | VEI-30 Dinion Infrared Imager
Day/Night Photocell
Control
Day/Night switch adjustable:
25 lux to 64 lux (default at 48 lux)
Night/Day switch adjustable:
43 lux to 82 lux (default at 63 lux)
Auto Black Automatic continuous, Off
Dynamic engine XF-Dynamic, 2X-Dynamic, SmartBLC
Dynamic range 120 dB (20-bit image processing)
Dynamic Noise
Auto, On/off selectable
Reduction
Sharpness Sharpness enhancement level selectable
SmartBLC On (includes 2X-Dynamic ) / Off
AGC AGC On or Off (0–30 dB) selectable
Peak White Invert On/Off
White Balance ATW, ATWhold and manual (2500 to
10000K)
Alarm Output VMD or Bilinx and dedicated Tamper (for
junction box)
Cable Compensation Up to 1000 m (3000 ft) coax without
external amplifiers (automatic set-up in
combination with Bilinx coaxial
communication)
Camera ID 17-character editable string, position
selectable
Test Pattern Generator Color bars 100%, Grayscale 11-step,
Sawtooth 2H, Checker board, Cross hatch,
UV plane
Lens 5–50 mm IR-corrected Varifocal auto-iris
Angular Field of View
(H x V)
5 mm FOV: 51° x 40°
50 mm FOV: 6° x 4°
Modes 6 preset programmable modes
Remote Control Bilinx coaxial bi-directional communication
Video Motion Detection One area, fully programmable
Privacy Masking Four independent areas, fully
programmable
Illuminator Specifications
LEDs 7 SMT type LED array with Variable Field
Illumination
Beam Patterns
(H x V)
Wide beam: 42° x 10° (with 3D diffuser)
Narrow beam: 10° x 10°
Wavelength 850 nm or 940 nm
Intensity Adjustment 31 step adjustments from min. to max.
On/Off Control Slave to camera mode
Manual on/off control via OSD and Bilinx
Illumination Tilt
Adjustment
Maximum: 13° tilt above camera axis
Minimum: 3° tilt above camera axis
IR Performance Ranges (0 Lux Environment)
850 nm 940 nm
Range HFOI Range HFOI
Detection 160 m
(525 ft)
Classificatio
n
120 m
(390 ft)
Recognition 90 m
(295 ft)
Identification 50 m
(165 ft)
DCRI values are narrow IR beam configuration at max. focal length.
28 m
(90 ft)
21 m
(70 ft)
16 m
(50 ft)
9 m
(30 ft)
80 m
(260 ft)
60 m
(195 ft)
45 m
(150 ft)
25 m
(80 ft)
14 m
(45 ft)
10 m
(35 ft)
8 m
(25 ft)
4 m
(15 ft)
Mechanical
Dimensions (H x W x L)
• Camera and Bracket 402 x 193 x 309 mm
(15.8 x 7.6 x 12.2 in.)
• Total Assembly 402 x 193 x 406 mm
(15.8 x 7.6 x 16.0 in.)
Weight
• Camera and Bracket 6.6 kg (14.5 lb)
• Junction Box 1.4 kg (3.1 lb)
Construction Corrosion-resistant aluminum
Color RAL 9010 pure white with RAL 9005
jet black detail
Finish Wet paint
Window 3.3-mm (1/8-in.) thick glass
Bracket Corrosion-resistant, cable-managed
Bracket Pan/Tilt Range Pan: ±90°
Tilt: -48°/+44°
Junction Box Separate from bracket allowing for
wiring and cabling prior to camera
installation
Environmental
Operating Temperature
4
–40°C to +50°C (–40°F to 122°F)
Storage Temperature –40°C to +70°C (–40°F to 158°F)
Operating Humidity 20% to 100% (condensing)
Storage Humidity up to 100%
Weatherproofing Type 4X (NEMA 4X) and IP67
6.82
173.3
15.87
403.2
9.72
247.0
8.52
216.4
4.13
105.0
7.23
R183.7
6.69
170.0
6.13
155.6
7.59
192.8
12.17
309.0
15.98
406.0
6.97
R177.1
6.30
160.0
5.30
134.6
14.47
367.6
[ in.]
mm
5 | VEI-30 Dinion Infrared Imager
Solar Radiation Tested to MIL-STD-810F test standard
for solar radiation (for A1 rated
environments)
4. Warm-up period required for cold start at –40°C (–40°F).
Dimensions
VEI-30 Dimensional Views
1 Top 3 Side
2 Front 4 Rear
21.82
554.2
15.89
403.7
5.83
148.2
0.65
16.5
8.00
203.2
9.30
236.1
6.50
165.1
8.55
217.2
5.2
5
133.4
5.25
133
.4
1.50
38.1
18.21
462.6
1.50
38.1
7.15
181.6
7.55
191.7
14.97
380.3
1.42
36.1
2.23
56.6
6.89
175
7.40
188
[ in.]
mm
6 | VEI-30 Dinion Infrared Imager
VEI-30 Dimensional Views – Mounts
1 Corner Mount - Top 3 Pole Mount - Top
2 Corner Mount - Side 4 Pole Mount - Side
Ordering Information
VEI-308V05-13W Dinion Infrared Imager, 850 nm, PAL
Dinion 2X imaging, 850 nm, 3D diffuser and Constant
Light illumination, PAL, white
Order number VEI-308V05-13W
VEI-308V05-23W Dinion Infrared Imager, 850 nm, NTSC
Dinion 2X imaging, 850 nm, 3D diffuser and Constant
Light illumination, NTSC, white
Order number VEI-308V05-23W
VEI-309V05-13W Dinion Infrared Imager, 940 nm, PAL
Dinion 2X imaging, 940 nm, 3D diffuser and Constant
Light illumination, PAL, white
Order number VEI-309V05-13W
VEI-309V05-23W Dinion Infrared Imager, 940 nm, NTSC
Dinion 2X imaging, 940 nm, 3D diffuser and Constant
Light illumination, NTSC, white
Order number VEI-309V05-23W
VG4-A-9541 Pole Mount Adapter
Pole mount adapter for a for an AutoDome Series
pendant arm or a VEI-30 or NEI-30 Dinion Infrared
Imager, designed for poles with a diameter of
100‑380 mm (4‑15 in.), white
Order number VG4-A-9541
VG4-A-9542 Corner Mount Adapter
Corner mount adapter for an AutoDome Series
pendant arm or a VEI-30 or NEI-30 Dinion Infrared
Imager
Order number VG4-A-9542
Accessories
UPA-2450-60 Power Supply, 120 V, 60 Hz
Indoor, 120 VAC, 60 Hz In; 24 VAC, 50 VA Out
Order number UPA-2450-60
UPA-2450-50 Power Supply, 220 V, 50 Hz
Indoor, 220 VAC, 50 Hz In; 24 VAC, 50 VA Out
Order number UPA-2450-50
VG4-SBOX-COVER Cover for Power Supply Box
Cover for VG4-SBOX-24VAC, VG4-SBOX-120VAC, VG4SBOX-230VAC, VEI-30, and NEI-30 junction box
Order number VG4-SBOX-COVER
7 | VEI-30 Dinion Infrared Imager
VDA‑455UTP
Adaptor for UTP twisted pair output
Order number VDA-455UTP
Software Options
VP-CFGSFT Configuration Tool for Imaging Devices
Camera configuration software for use with Bilinx
cameras
Order number VP-CFGSFT
Loading...