Bosch UHO-HBGS-61, UHO-HBPS-11, UHO-HGS-11, UHO-HBGS-11 Specsheet

Video | UHO Outdoor Camera Housings

UHO Outdoor Camera Housings

www.boschsecurity.com

u Protects camera/lens combinations up to 262 mm

(10.32 inch) in length

u Hinged side opening for easy installation and

camera setup

The UHO camera housings are smartly styled
enclosures that enable you to use the DINION family of
cameras in an outdoor environment or in areas where
the cameras need to be protected.
Models are available for use with 24 VAC, 120 VAC,
and 230 VAC power supplies. Depending on the
version, they can be used with 12 VDC, 24 VAC,
120 VAC, and 230 VAC cameras.

Functions

Easy installation

The hinged, side-opening design allows easy
installation of camera/lens combinations, and gives
access to the controls even when the housing is
mounted. Power and video cabling can be routed
through feed-through fittings or external 4-pin power
and BNC connectors at the rear of the housing. Feed­through entry holes are available in the base of some
models for even better cable management. Mounting
holes in the base can be used to install the housing on
a wide range of pan/tilts, adjustable heads, and
various camera mount brackets.

Temperature regulated

The aluminum-constructed housings have two heaters
(one for window defrosting and one for the housing
interior), and an optional blower. The interior heater
maintains the internal temperature of the housing in

u Sunshield included

u Heater and window defroster

cold temperature conditions to extend the lower
temperature limit to -40 °C (-40 °F). The permanently
powered window defroster heater and the optional
blower minimize fogging in high humidity locations.
Sunshields are included on all models.

Secure

For increased security, the units come with tamper­resistant screws for the locking clasps to prevent
unauthorized access.

Rugged

With a sleek design that meets IP66 standards, the
housings are the ideal solution for protecting your
video surveillance equipment from adverse elements.

Certifications and approvals

Safety acc. to EN 60065-1 (CE)

Immunity acc. to EN 50130-4 (CE)

Emission acc. to EN 55022 class B (CE)

acc. to EN 61000-3-2 (CE); EN 61000-3-3 (CE)
acc. to FCC CFR 47 Part 15, Class B

Region Regulatory compliance/quality marks

Europe CE DoC UHO camera housings

mm (in)

51 (2)

90 (3.5)

74 (2.9)

480 (18.9)

126 (5)171 (6.7)

38 (1.5)

23 (0.9)

262 (10.3)

81 (3.2)

91 (3.6)

mm (in)

2 | UHO Outdoor Camera Housings

Installation/configuration notes

Dimensions

(H x W x L) including sunshield

Weight 3.1 kg (6.8 lb)

Weight (with blowers) 3.2 kg (7.1 lb)

Construction Aluminum casing, silicone gaskets, all

stainless steel hardware

Color Cool gray 3C

Window 3 mm (0.12 in) glass

Locking clasps Tamper-resistant screws provided

Camera mounting Removable camera/lens tray, mounted with

two screws

Max. camera + lens

91 x 81 x 262 mm (3.6 x 3.2 x 10.3 in)

size (H x W x L)

Mounting holes 2x pair of 1/4-20 tapped holes

inner pair: 51 mm (2.0 in) center-to-center
outer pair: 73 mm (2.9 in) center-to-center

Electrical

Housing Voltage
supply

11 models: 24 VAC nominal (50/60 Hz)
51 models: 230 VAC nominal (50 Hz)
61 model: 120 VAC nominal (60 Hz)

Maximum size of camera and lens

Technical specifications

Mechanical

Dimensions

126.5 x 171.3 x 480 mm (5 x 6.7 x 18.9 in.)

Housing power
consumption

Maximum camera

With blower: 45 W
Without blower: 40 W

10 W

power consumption

Connectors (UHO-HGS and UHO-HBGS)

Rear fittings 1x cable diameter: 5.5 to 8 mm (0.14 to

0.32 in)
2x cable diameter: 5.8 to 10 mm (0.23 to

0.39 in)

Bottom feeds 2x cable diameter: 4.5 to 7.9 mm (0.18 to

0.31 in)

Connectors (UHI-HBPS and UHO-HPS)

Rear connectors 1x 4-pin (power)

1x BNC (video)

Environmental

Operating

-40 °C to +50 °C (‑40 °F to +122 °F)
temperature ­external

Operating
temperature –

1

internal

-20 °C to +55 °C (‑4 °F to +131 °F)

Enclosure protection2IP66

NEMA TS 2-2003

-34 ºC to +74 ºC (-30 ºF to +165 ºF)
(R2008),
para 2.1.5.1 using
fig. 2.1 test profile