Bosch UHO-HBGS-60 Specsheet
CCTV | UHO Series Outdoor Camera Housing
UHO Series Outdoor Camera Housing
Protects camera/lens combinations up to 262 mm
▶
(10.32 inch) length
Hinged side opening for easy installation and camera
▶
setup
IP66, NEMA-4X enclosure rating
▶
Strong aluminum construction
▶
Sunshield included
▶
Cable routing through base or rear of housing
▶
Tamper-resistant
▶
Continuous low power window defroster
▶
Self cleaning glass
▶
The UHO series housings are smartly styled housings, for
outdoor use. These housings are both cost-competitive and
installer-friendly. Models are available for use with 24 VAC,
115 VAC, and 230 VAC cameras, to fit a wide range of
applications.
Functions
Easy installation
The unique, hinged, side-opening design provides easy
installation of all camera/lens combinations, and allows
access to most camera and lens controls when the housing
is mounted. Power, video, and lens control cabling can be
routed through liquid-tight fittings in the bottom rear of the
housing, or for even better cable management, via the feedthrough entry holes in the base. Mounting holes in the base
permit installation to a wide range of pan/tilts, adjustable
heads, and various camera mount brackets.
Flexible
External 4-pin and BNC connectors for power and video,
located in the rear end cap, are also available on 24 VAC and
230 VAC models. These aluminum-constructed housings are
available with a factory-installed heater and blower. The
heater maintains the internal temperature of the housing in
cold temperature conditions as low as -40 °C (-40 °F). In
combination with a permanent low-power window
defroster and a continuous-duty blower, the unit minimizes
fogging in high humidity locations, and extends the
temperature limits. Sunshields are included on all outdoor
models.
Dinion ready
All models support installation of Dinion style cameras with
fixed focal, varifocal, or up to a 15x motorized zoom lens.
Secure
For increased security, the units come with tamperresistant screws for the locking clasps to prevent
illegitimate access to the housing contents.
Rugged
With a sleek design that meets IP 66 and NEMA-4X
enclosure standards, the UHO Series Housings are the
optimal solution for protecting your video surveillance
equipment from adverse elements.
Certifications and Approvals
Region Certification
Europe CE UHO-HGS
UHO-HGS-50x
www.boschsecurity.com
2 | UHO Series Outdoor Camera Housing
Safety acc. to EN 60950-1 (CE)
acc. to UL 2044-1; CAN/CSA C 22.2 no. 1-98
Immunity acc. to EN 50130-4 (CE)
Emission acc. to EN 55022 class B (CE)
acc. to EN 61000-3-2 (CE); EN 61000-3-3 (CE)
acc. to FCC CFR 47 Part 15, Class B
Installation/Configuration Notes
Dimensions in mm for all models, maximum internal usable
space available (based on camera/lens size)
Note Allowance is provided for wiring and connector
space requirements
Dimensions in mm for UHO-HGS-10, UHO‑HBGS‑10,
UHO‑HGS-50, UHO‑HBGS‑50 and UHO‑HBGS‑60 housings
outdoor units
Dimensions in mm for UHO‑HBPS‑10, UHO‑HPS‑50 and
UHO‑HBPS‑50 housings outdoor units
Technical Specifications
Electrical/Mechanical
Rear fitting 1x
cable diameter 4.0 to 7.0 mm (0.16 to 0.28 in)
models UHO‑HGS‑10, UHO‑HBGS-10, UHO‑HGS‑50,
UHO‑HBGS‑50, UHO‑HBGS‑60
Rear fittings 2x
cable diameter 6.5 to 10.5 mm (0.26 to 0.42 in)
models UHO‑HGS‑10, UHO‑HBGS‑10, UHO‑HGS‑50,
UHO‑HBGS‑50, UHO‑HBGS‑60
Bottom feeds 2x
cable diameter 4.0 to 7.0 mm (0.16 to 0.28 in)
models UHO‑HGS‑10, UHO‑HBGS‑10, UHO‑HGS‑50,
UHO‑HBGS‑50, UHO‑HBGS‑60
Rear connector 1x
type 4-pin (power)
models UHO‑HBPS‑10, UHO‑HPS‑50, UHO‑HBPS‑50
Rear connector 1x
type BNC (video)
models UHO‑HBPS‑10, UHO‑HPS‑50, UHO‑HBPS‑50
Window 3 mm (0.12 in) glass
Locking clasps Tamper-resistant screws provided
Camera power ratings 10 model: 24 VAC, 50/60 Hz, 1.25 A 50 mod-
el: 230 VAC, 50 Hz, 0.25 A 60 model: 120 VAC,
60 Hz, 0.4 A
Camera mounting Removable camera/lens tray, mounted with two
screws
Loading...