Bosch UHI-OG-0, UHI-OGS-0 Specsheet
Video | UHI‑OG(S)‑0 Indoor Camera Housing
UHI‑OG(S)‑0 Indoor Camera Housing
www.boschsecurity.com
u Protects camera/lens combinations up to 317 mm
(12.48 in) length
u Hinged side opening for easy installation and
camera setup
The Indoor Camera Housing is a smartly styled unit,
intended for use inside. This housing is both costcompetitive and installer-friendly.
Functions
Easy installation
The unique, hinged, side-opening design provides easy
installation of all camera/lens combinations, and
allows access to most camera and lens controls when
the housing is mounted. Route power, video, and lens
control cabling through the liquid-tight fittings in the
bottom rear of the housing, or for even better cable
management, via the feed-through entry holes in the
base. Mounting holes in the base permit installation to
a wide range of pan/tilts, adjustable heads, and
various camera-mounting brackets.
Dinion ready
This housing supports installation of Dinion style
cameras with fixed focal, varifocal, or up to a 15x
motorized zoom lens.
Secure
For increased security, the units come with tamperresistant screws for the locking clasps to prevent
illegitimate access to the housing contents. The
housing is an optimal solution for protecting your
indoor video surveillance applications.
u Strong aluminum construction
u Cable routing through base or rear of housing
u Tamper-resistant
Certifications and approvals
Safety acc. to EN 60950-1 (CE)
acc. to UL 2044-1; CAN/CSA C 22.2 no. 1-98
Immunity acc. to EN 50130-4 (CE)
Emission
acc. to EN 55022 class B (CE)
acc. to EN 61000-3-2 (CE); EN 61000-3-3 (CE)
acc. to FCC CFR 47 Part 15, Class B
Region Certification
Europe CE UHI-OGx
2 | UHI‑OG(S)‑0 Indoor Camera Housing
Installation/configuration notes
Dimensions in mm for UHI-OG(S)-0 housings indoor
units
Technical specifications
Electrical/Mechanical
Rear fitting 1 x, cable diameter 4.0 to 7.0 mm
(0.16 to 0.28 in)
Rear fittings
2 x, cable diameter 6.5 to 10.5 mm
(0.26 to 0.42 in)
Bottom feeds 2 x, cable diameter 4.0 to 7.0 mm
(0.16 to 0.28 in)
Window
3 mm (0.12 in) glass
Locking clasps Tamper-resistant screws provided
Camera power ratings 24/120/230 VAC, 50/60 Hz, 6.3 A
Camera mounting
Removable camera/lens tray, mounted
with two screws
Max camera + lens size (H
x W x L)
Construction
81 x 89 x 317 mm
(3.19 x 3.50 x 12.48 in)
Aluminum casing, neoprene gaskets, all
stainless steel hardware
Dimensions See drawings
Weight 2.3 kg (5.1 lb)
Mounting
2 x pair of tapped holes
Dimensions in mm maximum internal usable space
available (based on camera/lens size)
Notice
Allowance is provided for wiring and connector
space requirements
Parts included
QuantityComponent
1 UHI-OG-0 Indoor Housing
1 Sunshield (UHI-OGS-0 only)
thread 1/4-20
inner pair 50.8 mm (2.0 in) center spread
outer pair
73.7 mm (2.9 in) center spread
Color Gray
Environmental
Operating temperature -40 °C to +50 °C (-40 °F to +122 °F)
Enclosure protection IP66, NEMA-4X
Ordering information
UHI‑OG‑0 Indoor Housing
Order number UHI-OG-0
UHI‑OGS‑0 Indoor Housing with Sunshield
Order number UHI-OGS-0
Loading...