Bosch SE2M-304, SE2S-SN-304, SE2U-SN-304 Specsheet

Systems | SE2 Series Personnel Transmitters

SE2 Series Personnel Transmitters

Manual duress alarm

▶

Man‑down alarm

▶

Supervision

▶

Test mode

▶

Low battery indication

▶

Belt clip attachment

▶

The transmitters are available in the following models.

SE2 Model Description

SE2M‑304 A transmitter appropriate for testing and mainte-

nance.

SE2U‑304 A transmitter appropriate for users.

SE2S‑SN‑304 and SE2U-SN-304

Transmitters appropriate for security personnel.

System Overview

During an emergency, a person presses and holds the alarm button to produce an alarm. Generally the system sounders, strobes, or sirens activate within two seconds.

The alarm signal transmits to the receivers which relay the alarm signal to the transponder and to the central console.

The central console shows the person’s location on a map, along with a photograph, name, and vital information such as a medical condition or disability.

Functions

Manual Duress Alarm

Press the large button on the transmitter to send an alarm. During the alarm, the transmitter automatically continues to transmit every seven seconds, providing the most current location information.

Man-down Alarm

If the transmitter is tipped 60° from upright, it sends an alarm to the central console.

Supervision

The transmitter can send a tracking signal to the central console every 90 seconds, updating the person’s location.

Note The number of 90 second transmitters is

limited to the number of receivers for each transponder bus.

Test Mode

Use the test mode to test the transmitter anywhere in the protected area. When the user (subscriber) sees an indoor receiver or an outdoor strobe, the user can press the manual test button to perform a test. A small green light flashes on an indoor receiver or the strobe flashes during a successful test. The visual indicators (flashing green light or strobe light) are absent when the test fails.

www.boschsecurity.com

2 | SE2 Series Personnel Transmitters

The central console software saves the successful tests in the subscriber (user) database. The information can be printed on an optional printer.

Low Battery Indication

When the transmitter’s battery needs replacing, the test signal includes a low battery message to the central console. The central console software records the low battery messages in the subscriber (user) database. The information can be printed on an optional printer.

Database

The subscriber (user) database contains user information, including the date and time of the most recent transmitter test. You can search the subscriber (user) database to find people who neglected to test their transmitters within a specified time period.

Installation/Configuration Notes

Compatibility Information

Alert Units: EA120B

Central Console Software: SE2000 Series

Receivers: EA102A‑304

Transmitters: SE3 Series, SE3401, and SE88 Series

Transponder: EA500B

Environmental

Operating Temperature Range: -30°C to +65°C

(-22°F to +149°F)

Trademarks

Cycolac® is a registered trademark of General Electric (GE) Corporation, USA, in the United States and/or other countries.

Ordering Information

SE2M‑304 Maintenance Transmitter

SE2M-304

(304 MHz)

A lanyard pull cord attaches to a pin the transmitter base. When the pin is removed, the transmitter sends an alarm. The cord can be looped around a belt. Appropriate for testing and maintenance use.

SE2S-SN-304 Security Transmitter with

SE2-SN-304

Silent Alarm (304 MHz)

Includes a lanyard pull cord, supervision tracking, and silent alarm for security personnel.

Accessories

SE2 Nylon Holster

HOLSTER-SE2

Black 12.5 cm x 5.5 cm x 4.0 cm (4.9 in. x

2.2 in. x 1.6 in) holster with Velcro opening and belt clip.

Technical Specifications

Transmission

Frequency: 304 MHz

Antenna Type Internal

Trouble Output Through central console

Electrical

Battery Life: 4 years under normal conditions

when used with recommended battery type

Battery Replacement: Replaceable

CR2

Battery Type: 3 V olt

Physical

Color: Black

Dimensions: 10.2 cm x 4.1 cm x 2.0 cm

(4.0 in. x 1.6 in. x 0.8 in.)

Material:

Americas:

Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180 security.sales@us.bosch.com www.boschsecurity.us

Cycolac® ABS

Europe, Middle East, Africa:

Bosch Security Systems B.V. P.O. Box 80002 5600 JB Eindhoven, The Netherlands Phone: + 31 40 2577 284 Fax: +31 40 2577 330 emea.securitysystems@bosch.com www.boschsecurity.com

Asia-Pacific:

Robert Bosch (SEA) Pte Ltd, Security Systems 11 Bishan Street 21 Singapore 573943 Phone: +65 6258 5511 Fax: +65 6571 2698 apr.securitysystems@bosch.com www.boschsecurity.com

Represented by