Video | High PoE Midspans
High PoE Midspans
www.boschsecurity.com
u Supports high-power PoE/PoH and complies to both
the IEEE 802.3af and the IEEE 802.3at standards.
u 60 W and 95 W models
Bosch sells two (2) models of midspans (a 60 W
model and a 95 W model) that enable remote power
over an IP network connection for specific Bosch IP
cameras. Rated for indoor installation only, the
midspans can be installed indoors and wired to a
camera installed outdoors.
Each midspan has a single port and is designed to
carry data and power over a standard CAT5e (or
better) cable, delivered through all 4 pairs.
95 W Midspan
The 95 W midspan (NPD-9501A) is a high-power PoH
(Power Over HDBase T) device that provides data and
power between an Ethernet (remote network) switch
and a MIC7000 camera. It supports the proposed
standard for a 95 W output device, and is backwards
compatible to both the IEEE 802.3af and the IEEE
802.3at standards (15.4 W and 25.5 W).
60 W Midspan
The 60 W midspan (NPD-6001A) enables remote High
Power over Ethernet (High PoE) for various Bosch
IP/HD PTZ cameras. Generating a maximum of 60 W, it
complies to both the IEEE 802.3af and the IEEE
802.3at standards, while doubling the available power.
u Mounts to a wall, shelf, bench, desktop, and to
other units.
Certifications and approvals
Electromagnetic
Compatibility
(EMC)
Complies with FCC Part 15, ICES-003, and CE
regulations, including EN 55022 Class B
(emission), EN 55024 (Immunity), and VCCI
Product Safety Complies with UL/cUL, GS Mark per EN 60950-1
Regulatory
Compliance
IEEE802.3af (PoE), IEEE802.3at (PoE+,
including 2-event), RoHS Compliant, WEEE
Compliant, CE
Lightning
protection
Meets GR-1089-CORE lighting protection
demands
Region Certification
Europe CE (Declaration of Conformity) High PoE
Midspan 60W
USA UL High PoE Midspan
Installation/configuration notes
In the table below, an "X" identifies which midspans
can supply power to which models of MIC7000 and
AUTODOME 7000.
2 | High PoE Midspans
CAMERA MODELS 60 W midspan
(NPD-6001A)
AUTODOME 7000 –
outdoor models (with
heater)
MIC7000 - Standard
models without
illuminator
MIC7000 - Standard
models with illuminator
MIC7000 - Extreme low
temperature models
Surface mounting
95 W midspan
(NPD-9501A)
X
X X
X
X
Input Current 60 W model: 1.2 A
High Power Over Ethernet
(High PoE) Output
Surge protection No
95 W model: 1.35 A (maximum)
Pin Assignment and Polarity:
4 Pair power
- Pairs 1/2 (–) and 3/6 (+)
- Pairs 7/8 (–) and 4/5 (+)
User Port Power:
60 W maximum for NPD-6001A
95 W maximum for NPD-9501A
Environmental
Operating
Temperature
Storage
Temperature
Operating
Humidity
Storage
Humidity
At 95 W: -10 °C to +40 °C
(+14 °F to +104 °F)
At 60 W: -10 °C to +45 °C
(+14 °F to +113 °F)
At 30 W: -10 °C to +55 °C
(+14 °F to +131 °F)
-20 °C to +70 °C
(-4 °F to +158 °F)
(60 W and 95 W models)
60 W model: Maximum 90% relative, non-condensing
95 W model: 10% – 95%, non-condensing
60 W model: Maximum 95% relative, non-condensing
95 W model: 5% - 95%, non-condensing
Parts included
Quantity Part
1 Midspan, 60 W or 95 W
1 120 V power cord
1 230 V power cord
1 Installation Manual
Technical specifications
User Connections
Connectors Shielded RJ-45 100 Base-TX Ethernet PoE++
EIA 568A and 568B
Data
Data
transmission
Data provided over pairs 1/2 and 3/6 for 10/100
Ethernet
Electrical
Construction
Dimensions (W x H x L) 87.9 mm x 43 mm x 166 mm
Weight 400 g (0.88 lb)
Mounting To wall, shelf, bench, desktop, and to each
(3.46 in. x 1.68 in. x 6.53 in.)
other
Miscellaneous
Number of Ports One (1)
Pass through data
rates
Maximum cable length
recommended
System Indicators AC Power (green)
10/100/1000 Mbps
Not to exceed 100 m (333 ft) between
network source and terminal
Channel Power (green and orange)
Input Voltage 100 to 240 VAC, 50/60 Hz
Output Voltage 54-57 VDC (nominal)