Bosch NPC-20012-F2WL, NPC-20012-F2WL-W Specsheet

Video | TINYON IP 2000 WI
TINYON IP 2000 WI
www.boschsecurity.com
u Compact and stylish 720p indoor wireless LAN
camera
u IEEE 802.11b/g/n wireless connectivity
The 720p indoor microbox cameras with WiFi and a passive infrared (PIR) motion detector are ready-to­use, complete network video surveillance systems inside a compact and stylish housing. These cameras bring Bosch’s high-performance technology into the realm of homes, small office and retail businesses by offering a cost-effective solution for a broad range of applications.
System overview
Ideal for indoor use, the compact, aesthetic design is suitable for installations where housing size and appearance are important. The camera is available in two colors and is supplied with a versatile mounting bracket, allowing it to be easily positioned for best coverage. The wireless connectivity, with no external antenna, further enhances the aesthetic nature of the installation and also removes the need for a network cable.
u Built-in PIR motion detector and white light
illuminator
u FTP, Dropbox and e-mail alarms
Functions
Integrated wireless connection
The integrated wireless LAN feature supports the IEEE
802.11b, g and n standards allowing the camera to connect to fast WiFi access points. The WPS button provides an easy and simple way to set up the wireless LAN connection and security settings.
Motion and audio detection
The built-in passive infrared (PIR) sensor detects motion within 5 meters, even in complete darkness. It can then trigger an alarm, start recording or switch on the integrated white light LED to provide illumination in darkened rooms. These functions can also be activated by the detection of sound by the built-in microphone.
Built-in microphone and loudspeaker
The built-in microphone and loudspeaker allows remote users to listen in on an area and communicate messages to visitors or intruders via the loudspeaker. Audio detection can be used to generate an alarm if needed.
2 | TINYON IP 2000 WI
Intelligent Dynamic Noise Reduction
Quiet scenes with little or no movement require a lower bitrate. By intelligently distinguishing between noise and relevant information, Intelligent Dynamic Noise Reduction reduces bitrate by up to 50%. Because noise is reduced at the source during image capture, the lower bitrate does not compromise on video quality. With Intelligent Dynamic Noise Reduction, our focus is to significantly reduce storage costs, and lessen network strain by only using bandwidth when needed.
Area-based encoding
Area-based encoding is another feature which reduces bandwidth. Compression parameters for up to eight user-definable regions can be set. This allows uninteresting regions to be highly compressed, leaving more bandwidth for important parts of the scene.
Bitrate optimized profile
The average typical optimized bandwidth in kbits/s for various image rates is shown in the table:
fps 720p 480p
30 1200 600
15 955 478
12 877 438
5 568 284
2 245 122
Multiple streams
The innovative multi-streaming feature delivers various H.264 streams together with an M‑JPEG stream. These streams facilitate bandwidth-efficient viewing and recording as well as integration with third-party video management systems. Depending on the resolution and frame rate selected for the first stream, the second stream provides a copy of the first stream or a lower resolution stream. The third stream uses the I-frames of the first stream for recording; the fourth stream shows a JPEG image at a maximum of 10 Mbit/s.
Easy installation
The power supply adapter delivered with the camera provides the +5 VDC power supply required. The wireless connectivity removes the need for a network cable, however, an Ethernet compliant network cable can be connected if required. The WPS button simplifies the selection of a WiFi network and the network password setting.
Tamper and motion detection
A wide range of configuration options is available for alarms signaling camera tampering. A built-in algorithm for detecting movement in the video can also be used for alarm signaling.
Cloud-based services
The camera supports time-based or alarm-based JPEG posting to four different accounts. These accounts can address FTP servers or cloud-based storage facilities (for example, Dropbox). Video clips or JPEG images can also be exported to these accounts. Alarms can be set up to trigger an e-mail or SMS notification so you are always aware of abnormal events.
Access Security
Password protection with three levels and 802.1x authentication is supported. To secure Web browser access, use HTTPS with a SSL certificate stored in the camera.
Complete viewing software
There are many ways to access the camera’s features: using a web browser, with the Bosch Video Management System, with the free-of-charge Bosch Video Client, with the video security mobile app, or via third-party software.
Video security App
The Bosch video security mobile App has been developed to enable Anywhere access to HD surveillance images allowing you to view live images from any location. The App is designed to give you complete control of all your cameras, from panning and tilting to zoom and focus functions. It’s like taking your control room with you. This App, together with the separately available Bosch transcoder, will allow you to fully utilize our dynamic transcoding features so you can play back images even over low-bandwidth connections.
System integration
The camera conforms to the ONVIF Profile S specification. Compliance with this standard guarantees interoperability between network video products regardless of manufacturer. Third-party integrators can easily access the internal feature set of the camera for integration into large projects. Visit the Bosch Integration Partner Program (IPP) website (ipp.boschsecurity.com) for more information.
Certifications and approvals
HD standards
Complies with the SMPTE 296M-2001 Standard in:
– Resolution: 1280x720 – Scan: Progressive – Color representation: complies with ITU-R BT.709 – Aspect ratio: 16:9 – Frame rate: 25 and 30 frames/s
Standards
EN 60950-1; UL 60950-1; CAN/CSA-C22.2
NO. 60950-1-07
FCC Part15 Subpart B, Class B
Loading...
+ 3 hidden pages