Bosch NIT8068SUC, NIT8068UC Instruction Manual
Cooktop
Use and Care Manual
NIT8068SUC, NIT8068UC
1,78
&
&
1,768
2
Table of Contents
Use and care manual
Safety Definitions .......................................................... 4
IMPORTANT SAFETY INSTRUCTIONS ........................ 5
Fire Safety .............................................................................. 5
Cooking Safety ...................................................................... 5
Burn Prevention .................................................................... 6
Child Safety ........................................................................... 6
Cleaning Safety ..................................................................... 6
Cookware Safety .................................................................. 6
Proper Installation and Maintenance ................................ 7
Electromagnetic interference ............................................. 7
Cooling fan ............................................................................ 7
State of California Proposition 65 Warnings ................... 7
Causes of damage ......................................................... 8
Protecting the Environment ......................................... 8
Energy-saving advice ........................................................... 8
Cooking with Induction ................................................. 8
Advantages of induction cooking ...................................... 8
Cookware ............................................................................... 8
Getting familiar with the appliance ............................ 10
Control Panel ..................................................................... 10
The elements ...................................................................... 10
Residual heat indicator .................................................... 10
Operation ...................................................................... 11
Main power switch ............................................................ 11
Setting the cooktop ........................................................... 11
Cook time ........................................................................... 13
Kitchen timer ...................................................................... 13
®
SpeedBoost
function ...................................................... 14
AutoChef® ........................................................................... 14
Panel lock ........................................................................... 16
Wipe Protection ................................................................. 17
Automatic time limitation .................................................. 17
Basic settings ..................................................................... 17
Cleaning and Maintenance ......................................... 19
Daily Cleaning .................................................................... 19
Cleaning guidelines .......................................................... 19
Cleaning chart .................................................................... 19
Maintenance ....................................................................... 20
Service .......................................................................... 21
Frequently-asked questions and answers (FAQ) ........ 21
Fixing Malfunctions ........................................................... 22
How to Obtain Warranty Service .................................... 23
STATEMENT OF LIMITED PRODUCT WARRANTY .. 24
What this Warranty Covers & Who it Applies to .......... 24
How Long the Warranty Lasts ......................................... 24
Repair/Replace as Your Exclusive Remedy ................ 24
Out of Warranty Product .................................................. 24
Warranty Exclusions ......................................................... 24
Pr odukt i nf o.
Additional information on products, accessories,
replacement parts and services can be found at
www.bosch-home.com and in the online shop
www.bosch-home.com/us/store
3
Safety Definitions
9 WARNING
Safety Definitions
This indicates that death or serious injuries may
occur as a result of non-observance of this warning.
9 CAUTION
This indicates that minor or moderate injuries may
occur as a result of non-observance of this warning.
NOTICE: This indicates that damage to the appliance or property may occur as a result of non-compliance with this advisory.
Note: This alerts you to important information and/or tips.
4
9 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY I NST RUCT I ONSREAD AND SAVE THESE INSTRUCTIONS
WARNING
When properly cared for, your new appliance has been
designed to be safe and reliable. Read all instructions
carefully before use. These precautions will reduce the
risk of burns, electric shock, fire, and injury to persons.
When using kitchen appliances, basic safety precautions
must be followed, including those in the following pages.
Examine the appliance after unpacking it. In the event of
transport damage, do not plug it in.
Fire Safety
Do not allow aluminum foil, plastic, paper or cloth to
come in contact with a hot surface element, burner or
grate. Do not allow pans to boil dry.
If the cooktop is near a window, forced air vent or fan, be
certain that flammable materials such as window
coverings do not blow over or near the burners or
elements. They could catch on fire.
Always have a working smoke detector near the kitchen.
Never leave the cooktop unattended when in use.
Boilovers cause smoking and greasy spillovers may
ignite.
WARNING
TO REDUCE THE RISK OF A GREASE FIRE:
a.
Never leave surface units unattended at high settings.
Boilovers cause smoking and greasy spillovers that
may ignite. Heat oils slowly on low or medium settings.
b.
Always turn hood ON when cooking at high heat or
when flambeing food (i.e. Crepes Suzette, Cherries
Jubilee, Peppercorn Beef Flambé).
c.
Clean ventilating fans frequently. Grease should not be
allowed to accumulate on fan or filter.
d.
Use proper pan size. Always use cookware
appropriate for the size of the surface element.
In the event that personal clothing or hair catches fire,
drop and roll immediately to extinguish flames.
Have an appropriate fire extinguisher available, nearby,
highly visible and easily accessible near the appliance.
Smother flames from food fires other than grease fires
with baking soda. Never use water on cooking fires.
WARNING
TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A GREASE FIRE, OBSERVE THE FOLLOWING:
a.
SMOTHER FLAMES with a close-fitting lid, cookie
sheet, or metal tray, then turn off the burner. BE
CAREFUL TO PREVENT BURNS. If the flames do not
go out immediately, EVACUATE AND CALL THE FIRE
DEPARTMENT.
b.
NEVER PICK UP A FLAMING PAN – You may be
burned.
c.
DO NOT USE WATER, including wet dishcloths or
towels – a violent steam explosion will result.
d.
Use an extinguisher ONLY if:
- You know you have a Class ABC extinguisher, and
you already know how to operate it.
- The fire is small and contained in the area where it
started.
- The fire department is being called.
- You can fight the fire with your back to an exit.
Whenever possible, do not operate the ventilation system
during a cooktop fire. However, do not reach through fire
to turn it off.
Cooking Safety
WARNING
Use this appliance only for its intended use as described
in this manual. NEVER use this appliance as a space
heater to heat or warm the room. Doing so may result in
overheating the appliance. Never use the appliance for
storage.
WARNING
If AutoChef® is not working properly, overheating may
result causing smoke and damage to the pan.
WHEN COOKING WITH AUTOCHEF® OBSERVE THE FOLLOWING:
▯ Use a system pan only
▯ Always put the pan in the centre of the heating element
▯ Do not place a lid on the pan
▯ Never leave frying fat unattended
Never use the appliance if liquids or foods have spilled
around the control panel. Always turn off the cooktop
and dry the control panel.
Injury and damage to the appliance may occur if control
elements are not used properly.
If the cooktop turns off automatically and can no longer
be operated, it may turn itself on unintentionally at a later
point. Switch off the circuit breaker in the fuse box.
Contact Customer Support for service.
5
9 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Burn Prevention
DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
UNITS - Surface units may be hot even though they are
dark in color. Areas near surface units may become hot
enough to cause burns. During and after use, do not
touch, or let clothing, potholders, or other flammable
materials contact surface units or areas near units until
they have had sufficient time to cool. Among these areas
are the cooktop and areas facing the cooktop.
Do not heat or warm unopened food containers. Build-up
of pressure may cause the container to burst and cause
injury.
Always use dry potholders. Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
Always turn hood ON when cooking at high heat or when
flambéing food (i.e. Crêpes Suzette, Cherries Jubilee,
Peppercorn Beef Flambé).
Use high heat settings on the cooktop only when
necessary. To avoid bubbling and splattering, heat oil
slowly on no more than a low-medium setting. Hot oil is
capable of causing extreme burns and injury.
Never move a pan of hot oil, especially a deep fat fryer.
Wait until it is cool.
Secure all loose garments, etc. before beginning. Tie
long hair so that it does not hang loose, and do not wear
loose fitting clothing or hanging garments, such as ties,
scarves, jewelry, or dangling sleeves.
WARNING
RISK OF BURNS
Metallic objects become hot very quickly on the cooktop.
Never set down metallic objects, such as knives, forks,
spoons and lids on the cooktop.
WARNING
RISK OF BURNS
The pan detection shut off feature may not turn off the
cooking zone due to spilled food or objects placed on
the cooktop.
If the display does not work when a cooking area is
heating up, disconnect the circuit breaker or fuse in the
electrical panel. Contact an authorized servicer.
Child Safety
When children become old enough to use the appliance,
it is the responsibility of the parents or legal guardians to
ensure that they are instructed in safe practices by
qualified persons.
Do not allow anyone to climb, stand, lean, sit, or hang on
any part of an appliance, especially a door, warming
drawer, or storage drawer. This can damage the
appliance, and the unit may tip over, potentially causing
severe injury.
Do not allow children to use this appliance unless closely
supervised by an adult. Children and pets should not be
left alone or unattended in the area where the appliance
is in use. They should never be allowed to play in its
vicinity, whether or not the appliance is in use.
CAUTION
Items of interest to children should not be stored in an
appliance, in cabinets above an appliance or on the
backsplash. Children climbing on an appliance to reach
items could be seriously injured.
Cleaning Safety
Do not clean the appliance while it is still hot. Some
cleaners produce noxious fumes when applied to a hot
surface. Wet clothes and sponges can cause burns from
steam.
Do not use steam cleaners to clean the appliance.
Cookware Safety
Hold the handle of the pan when stirring or turning food.
This helps prevent spills and movement of the pan.
Use Proper Pan Size.
The use of undersized cookware will expose a portion of
the heating element or burner to direct contact and may
result in ignition of clothing. Select cookware having flat
bottoms large enough to cover the surface heating unit.
This appliance is equipped with one or more surface
units of different sizes. Proper relationship of cookware to
heating element or burner will also improve efficiency.
Cookware not approved for use with ceramic cooktops
may break with sudden temperature changes. Use only
pans that are appropriate for ceramic induction
cooktops.
Always position handles of utensils inward so they do not
extend over adjacent work areas, burners, or the edge of
the cooktop. This reduces the risk of fires, spills and
burns.
WARNING
RISK OF INJURY
When cooking with a double-boiler the cooktop and
cooking vessel may crack due to overheating. The
cooking vessel in the double-boiler must not come in
direct contact with the bottom of the pot filled with water.
Use only heat-resistant cookware.
WARNING
DANGER OF INJURY
Cookware may jump upward due to fluid trapped
between the cookware bottom and cooking zone. Always
keep cooking zone and cookware bottom dry.
6
9 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Proper Installation and Maintenance
Have the installer show you the location of the circuit
breaker or fuse. Mark it for easy reference.
This appliance must be properly installed and grounded
by a qualified technician. Connect only to properly
grounded outlet. Refer to Installation Instructions for
details.
This appliance is intended for use up to a maximum
height of 13,100 feet (4,000 meters) above sea level.
This appliance is intended for normal family household
use only. It is not approved for outdoor use. See the
Statement of Limited Product Warranty. If you have any
questions, contact the manufacturer.
Do not store or use corrosive chemicals, vapors,
flammables or nonfood products on or near this
appliance. It is specifically designed for use when
heating or cooking food. The use of corrosive chemicals
in heating or cleaning will damage the appliance and
could result in injury.
Do not operate this appliance if it is not working properly,
or if it has been damaged. Contact an authorized
servicer.
Do not cook on a broken cooktop. Cleaning solutions
and spillovers may create a risk of electric shock.
Do not repair or replace any part of the appliance unless
specifically recommended in this manual. Refer all
servicing to a factory authorized service center.
To avoid electrical shock hazard, before servicing the
appliance, switch power off at the service panel and lock
the panel to prevent the power from being switched on
accidentally.
CAUTION
Persons with a pacemaker or similar medical device
should exercise caution when standing near an induction
cooktop while it is in use. Consult your doctor or the
manufacturer of the pacemaker or similar medical device
for additional information about its effects with
electromagnetic fields from an induction cooktop.
Cooling fan
The cooktop is equipped with a cooling fan on its
underside. Should the cooktop lie above a drawer, there
must be no objects or paper in it. They may be sucked in
and compromise the cooling of the appliance or damage
the fan.
There must be a minimum distance of ¾" (20mm)
between the content of the drawer and the fan input.
State of California Proposition 65 Warnings:
WARNING
This product can expose you to chemicals including vinyl
chloride, which is known to the State of California to
cause cancer and birth defects or other reproductive
harm. For more information go to
www.P65Warnings.ca.gov.
Electromagnetic interference
WARNING
This induction cooktop generates and uses ISM
frequency energy that heats cookware by using an
electromagnetic field. It has been tested and complies
with Part 18 of the FCC Rules for ISM equipment. This
induction cooktop meets the FCC requirements to
minimize interference with other devices in residential
installation. Induction cooktops may cause interference
with television or radio reception. If interference occurs,
the user should try to correct the interference by:
▯ Relocating the receiving antenna of the radio or
television.
▯ Increasing the distance between the cooktop and the
receiver.
▯ Connecting the receiver into an outlet different than the
cooktop.
It is the user’s responsibility to correct any interference.
7
Causes of damage
NOTICES
▯ Scratches on glass ceramic surface: Cookware with
rough bottoms will scratch the glass ceramic surface.
▯ Salt, sugar and sand: Salt, sugar or grains of sand will
scratch the glass ceramic surface. Never use the
cooktop as a working surface or for setting things
down.
▯ Overheated cookware: Avoid heating pots or pans
that are empty.
▯ Hot cookware: Never set down hot pans and pots on
the control panel or frame. This may cause damage.
Protecting the Environment
Energy-saving advice
▯ Always place a fitting lid on cookware. Cooking with
an uncovered pan will result in a four-fold increase in
energy use. Use a glass lid to provide visibility and
avoid having to lift the lid.
▯ Use cookware equipped with a solid, flat bottom.
Curved pan bases increase energy consumption.
▯ The diameter of the pan base must match the size of
the element. If not, energy may be wasted. Note: The
manufacturer normally indicates the pan's upper
▯ Hard and sharp objects: Hard or sharp objects falling
on the cooktop may damage it.
▯ Boiled-over food: Sugar and products containing
sugar may damage the cooktop. Immediately eliminate
spills of these products with a glass scraper.
▯ Foils and plastics: Aluminum foil and plastic will melt
on the hot cooking zones. Stove protective film isn't
suitable for your cooktop.
▯ Unsuitable cleaning agent: Shimmering metallic
discolorations on the glass ceramic surface result from
the use of inappropriate cleaning agents and abrasion
from cookware.
diameter. This is normally greater than the diameter of
the pan's base.
▯ Choose cookware of a size suited to the amount of
food you are going to cook. A large pan that is only
half full will use a lot of energy.
▯ Use a small amount of water when cooking. This
saves energy, and vegetables retain a larger
percentage of their vitamins and minerals.
▯ Select a lower power level.
Cooking with Induction
Advantages of induction cooking
Induction cooking is very different from traditional
cooking methods, as heat builds up directly in the item of
cookware. This offers numerous advantages:
▯ Saves time when boiling and frying.
▯ Saves energy.
▯ Easier to care for and clean. Spilled food does not
burn on as quickly.
▯ Heat control and safety – the cooktop increases or
decreases the heat supply as soon as the user
changes the setting. The induction element stops the
heat supply as soon as the cookware is removed from
the element, without having to switch it off first.
Cookware
Only use ferromagnetic cookware for induction cooking,
such as:
▯ Cookware made from enameled steel
▯ Cookware made from cast iron
▯ Special induction-compatible cookware made from
stainless steel.
To check whether your cookware is suitable for induction
cooking, refer to the section on ~ "Suitability test of
cookware".
To achieve a good cooking result, the ferromagnetic area
on the base of the pan should match the size of the
element. If a element does not detect an item of
cookware, try placing it on another element with a
smaller diameter.
FP
LQ
FP
LQ
FP
LQ
Some induction cookware does not have a fully
ferromagnetic base:
▯ If the base of the cookware is only partially
ferromagnetic, only the area that is ferromagnetic will
heat up. This may mean that heat will not be
distributed evenly. The non-ferromagnetic area may
not heat up to a sufficient temperature for cooking.
8
▯ The ferromagnetic area will also be reduced if the
material of which the base of the cookware is made
contains aluminum, for example. This may mean that
the cookware will not become sufficiently hot or even
that it will not be detected.
Unsuitable cookware
Do not ever use adapter plates for induction or cookware
made of:
▯ Traditional stainless steel
▯ Glass
▯ Clay
▯ Copper
▯ Aluminum
Empty pans or pans with a thin base
Do not heat up empty pans, or use pans with a thin base.
The cooktop is equipped with an internal safety system.
However, an empty pan may heat up so quickly that the
"automatic switch off" function may not have time to react
and the pan may reach very high temperatures. The pan
base could melt and damage the cooktop glass. In this
case, do not touch the pan and switch the cooktop off. If
the cooktop fails to work after it has cooled down, please
contact Customer Support.
Pan detection
Each element has a lower limit for pan detection. This
depends on the diameter of the ferromagnetic area of the
cookware and the material of which its base is made. For
this reason, you should always use the element that best
matches the diameter of the base of the pan.
Properties of the base of the cookware
The material(s) of which the base of the cookware is
made can affect the cooking result. Using pots and pans
made from materials that distribute heat evenly through
them, such as stainless-steel pans with a three-layer
base, saves time and energy.
Use cookware with a flat base; if the base of the
cookware is uneven, this may impair the heat supply.
No pan or improper size
If no pan is placed on the selected element, or if it is
made of unsuitable material or is not the correct size, the
power level displayed on the element indicator will flash.
Place a suitable pan on the element to stop the flashing.
If you take longer than 90 seconds to place a suitable
pan on the element, it will automatically turn off.
9
Getting familiar with the appliance
In this section we describe the control panel, elements
and displays.
Control Panel
Touch keys
On/Off Main switch
$
0 1 û 2 û ... 8 û 9
Panel Lock Child safety panel lock /
Speed Boost
Auto Chef
Timer Timer functions
min / low / med
/ max
Display icons
‹
Ú
x
A
‹‹
‚-Š
Select cooking element
Settings area
Wipe protection
SpeedBoost® function
AutoChef® frying function
Select power level for AutoChef
Cooktop ready
Indicated function active
Cook time set
Indicates selected element
Timer value
Power level
®
These instructions apply to more than one cooktop, your
appliance might vary slightly.
Display icons
•/œ
›
‘
min Time display
s
max, med,
low, min
V min
Touch control zone
When you touch a symbol, the corresponding function
will be activated.
Notes
▯ When you touch several symbols at once the settings
will not change. This enables you to clean the touch
contol zone when food has spilled over.
▯ Always keep the touch control zone clean and dry.
Moisture and dirt can affect proper functioning.
Residual heat
SpeedBoost® function
AutoChef® function
AutoChef® temperature
Temperature settings
Timer function
The elements
Element
Single element Always use cookware of a suitable size.
$
Use only cookware suitable for induction cooking; see the section ~ "Cooking with Induction"
Residual heat indicator
The cooktop has a residual heat indicator for each
element. This indicates that an element is still hot. Do not
touch an element while the residual heat indicator is lit
up.
The following indicators are shown depending on the
amount of residual heat:
▯ Display •: High temperature
10
▯ Display œ: Low temperature
If you remove the cookware from the element during
cooking, the residual heat indicator and the selected
heat setting will flash alternately.
When the element is switched off, the residual heat
indicator will light up. Even after the cooktop has been
switched off, the residual heat indicator will stay lit for as
long as the element is still warm.
Operation
Main power switch
Use the main switch to turn on the electronic circuitry for
the control panel. The cooktop is now ready to use.
Turning the cooktop on
Touch the On/Off touch key until the indicator above the
main switch and the temperature level indicators ‹ next
to the heating elements turn on.
Turning the cooktop off Touch the On/Off touch key. The indicator above the On/
Off key goes out. The cooktop is switched off. The
residual heat indicators will remain on until the elements
have cooled off sufficiently.
Notes
▯ The cooktop switches off automatically when all the
elements have been switched off for more than
20 seconds.
The residual heat indicator remains lit until the
elements have cooled down sufficiently.
displayed next to the corresponding element symbol.
▯ The settings will be stored for 4 seconds after turning
off the cooktop. If you turn the cooktop back on during
that time the cooktop will continue with those settings.
•/œ is
Setting the cooktop
This section will show you how to set the elements. The
table contains details on the heat settings for a variety of
dishes.
Setting the element
Select the desired heat level using the number keys
1 to 9.
Heat level 1 = minimum power
Heat level 9 = maximum power
Each heat setting has an intermediate level. This level is
indicated by . in the element display and is set by
touching the û symbols between the number keys.
Selecting the heat level
The cooktop must be turned on.
1.
Select the desired element with by touching the $
symbol on the control panel. In the element display
and the __ indicator light up.
2.
Within the following 10 seconds, set the desired power level using the number keys.
3.
To change the power level, select the element and set the desired power level using the number keys. To set an intermediate level touch the û symbols between the number keys.
Turning off the element
Select the element and set the heat level to 0. The
element is turned off and the residual heat indicator is
displayed.
Notes
▯ If there is no cookware on the induction cooking zone,
the heat setting display blinks. After a while, the
cooking zone will switch itself off.
▯ If cookware has been placed on the cooking zone
before you turn on the cooktop, it will be detected
within 20 seconds after you have touched the main
switch and the cooking zone will be selected
automatically. Once detected, set the power level
within the next 20 seconds, otherwise the cooking
zone will turn off.
Even if there are several pots and pans on the cooktop
when it is switched on, only one piece of cookware is
detected.
‹
11
Recommendations
▯ When heating up puree, cream soups and thick
sauces, stir occasionally.
▯ Set heat setting 8 to 9 for preheating.
▯ When cooking with the lid on, turn the heat setting
down as soon as steam escapes between the lid and
the cookware.
▯ After cooking, keep the lid on the cookware until you
serve the food.
▯ To cook with the pressure cooker, observe the
▯ Do not cook food for too long, otherwise the nutrients
will be lost. The kitchen timer can be used to set the
optimum cooking time.
▯ For healthier cooking results, oil or grease should not
be heated until it smokes.
▯ To brown food, fry small portions in succession.
▯ Cookware may reach high temperatures while the food
is cooking. We recommend that you use pot holders.
▯ You can find recommendations for energy-efficient
cooking in section ~ "Protecting the Environment"
manufacturer's instructions.
Settings table
The following table provides some examples. Cooking
times may vary depending on the type of food, its weight
and quality. Deviations are therefore possible.
9 CAUTION
During cooking, stews or liquid meals such as
soups, sauces or drinks can heat up too quickly
unnoticed and overflow or spatter. For this reason
we recommend that you stir continuously, gradually
heating the food at a suitable power level.
Power levels
Melting
chocolate 1.
butter 1 - 2
Heating
frozen vegetables (e.g. spinach) 2. - 3.
broth 7 - 8
thick soup 1. - 2.
milk** 1 - 2
Simmering
delicate sauce e.g. Béchamel sauce 4 - 5
spaghetti sauce 2 - 3
pot roast 4 - 5
fish** 4 - 5
Cooking
rice (with double amount of water) 2 - 3
potatoes bolied in thier skins with 1-2 cups of water 4 - 5
boiled potatoes with 1-2 cups of water 4 - 5
fresh vegetables with 1-2 cups of water 2 - 3.
frozen vegetables with 1-2 cups of water 3. - 4.
pasta (2-4 qt. water)* 6 - 7
pudding** 1 - 2
cereals 2 - 3
Frying
pork chop 5. - 6.
chicken breast 5 - 6
bacon 6 - 7
eggs 5 - 6
fish 5 - 6
pancakes 6 - 7
12
Power levels
Deep fat frying** (in 1-2 qt. oil)
deepfrozen foods, e.g. chicken nuggets (0.5 lb per serving) 8 - 9
other e.g. doughnuts (0.5 lb per serving) 4. - 5.
Keep warm
tomato sauce 1.
* ongoing cooking without lid
** without lid
Cook time
You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
9 CAUTION
▯ When using the timer, always keep an eye on the
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
▯ This function should not be used for long periods
of time, especially at high heat settings.
▯ Make sure the cooktop is turned off with the main
power switch after each use.
Setting a cook time
The cooktop must be turned on.
1.
Select the desired element and power level.
2.
Touch the Timer key. The x indicator lights up in the element display and ‹‹ is shown in the timer display.
3.
Whithin 10 seconds enter the desired cook time using the number keys.
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear a beep. The indicator ‹ appears in
the element display and the timer display shows ‹‹ for
10 seconds. The x indicator in the element display
stays on.
Touch the Timer key, to turn the indicators and the beep
off.
Notes
▯ To set a cooking time of under 10 minutes, always
touch 0 before you select the required value.
▯ If a cooking time was set for several elements, the time
information for the selected element is shown in the
timer display.
▯ Select the relevant element to call up the remaining
cooking time.
▯ You can set a cooking time of up to ŠŠ minutes.
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the section on ~ "Basic settings"
Note: The cook time can be changed or cancelled for any element:
Select the desired element and touch the Timer key
twice. The remaining cook time for the element is
displayed. Adjust the cook time using the number keys,
or deactivate it by setting the the timer value to ‹‹.
After a few seconds the timer will start to count down.
AutoChef
®
If a cooking time has been programmed for an element
and AutoChef® has been activated, the cooking time will
not begin to count down until the selected temperature
setting has been reached.
Changing or cancelling cook time
1.
Select the desired element and touch the Timer key.
2.
Adjust the cook time using the number keys. To cancel cook time set the timer to ‹‹.
Kitchen timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. You can also use the
kitchen timer when the cooktop is turned off or locked.
This function does not automatically switch off an
element.
Setting the kitchen timer
1.
Touch the Timer key until the V indicator lights up.
‹‹ and min appear on the timer display.
2.
Set the desired time using the number keys.
The timer start to count down after a few seconds.
13
Changing or deleting the time Touch the Timer key repeatedly until the
V indicator
lights up.
Change the time using number keys, or set ‹‹ in order
to delete the programmed time.
When the time has elapsed
A beep sounds.
‹‹ appears on the timer display and the
V indicator lights up. The displays go out after
10 seconds.
When the Timer key is touched, the displays go out and
the beep stops.
AutoChef
®
When you are using AutoChef® to operate the heating
element, a sensor controls the temperature of the pan.
Advantages when frying
▯ The element only heats up if this is required to
maintain the temperature. This saves energy and
prevents the oil or fat from overheating.
▯ The AutoChef
®
function reports when the empty frying
pan has reached the optimum temperature for adding
oil and then for adding the food.
SpeedBoost® function
The SpeedBoost® function can be used to heat large
amounts of water faster than by using heat level Š.
Limitation on use
This function can always be activated for an element,
provided the other element in the same group is not in
use (see illustration). Otherwise, › and Š will flash in the
display for the selected element; heat setting Š will then
be set automatically without activating the function.
Activation
1.
Select an element.
2.
Touch the Speed Boost key.
› lights up on the display.
The function is activated.
Deactivation
1.
Select the element on which SpeedBoost® is set.
2.
Touch the Speed Boost key.
› goes out on the display and the element switched
back to heat setting Š.
The function is deactivated. Note: In certain circumstances, the function may be
deactivated automatically to protect the internal
electronic components of the cooktop.
9 CAUTION
▯ Never leave oil or fat cooking unattended.
▯ Place the pan in the centre of the element. Make
sure that the base of the pan has the proper
diameter.
▯ Do not cover the pan with a lid. The automatic
regulation will not work. A mash splatter guard
can be used without affecting the automatic
regulation.
▯ Only use fat or oil that is suitable for frying. When
you are using butter, margarine, olive oil or pork
lard, select the min temperature setting.
▯ AutoChef
Suitable pans for AutoChef
®
is not suitable for boiling.
®
Suitable frying pans for use with AutoChef® are available
as optional accessory. Only use pans that are suitable for
use with AutoChef®. You can buy our system pans in
specialized stores, or through our Technical Assistance
Service. Always indicate the related reference code.
▯ HEZ390210 (Small)
▯ HEZ390220 (Medium)
▯ HEZ390230 (Large)
The frying pans have a non-stick coating, which means
that very little oil is needed for frying.
9 CAUTION
▯ The AutoChef
®
function was set especially for this
type of frying pan.
▯ Other frying pans may overheat. The temperature
can be set higher or lower. Try the lowest heat
setting first and then change it according to your
requirements.
▯ Make sure that the diameter of the base of the
frying pan corresponds to the size of the element.
Place the pan in the centre of the element.
▯ If a different type of pan is used, try it first at the
lowest frying level, adjusting it as required. The
pans may overheat.
14
Frying levels
Power level Temperature Suitable for
max high e.g., potato pancakes, sautéed potatoes, and rare beefsteak.
med medium-high e.g., thin fried foods like frozen pies, escalopes, ragu, vegetables
low medium-low e.g. thick fried food such as hamburgers and sausages, fish.
min low e.g. omelettes, using butter, olive oil or margarine
Frying chart
The chart lists which heat setting is suitable for each type
of food. The frying time may vary depending on the type,
weight, size and quality of the food.
The set heat setting varies depending on the frying pan
that is used.
Preheat the empty pan; add oil and food after the
acoustic signal has sounded.
Temperature
setting
Meat
Escalope, plain or breaded med 6 - 10
Fillet med 6 - 10
Chops* low 10 - 15
Cordon bleu, Wiener Schnitzel* med 10 - 15
Steak, rare; 1¼" (3 cm) thick max 6 - 8
Steak, medium or well-done; 1¼" (3 cm) thick med 8 - 12
Poultry breast; ¾" (2 cm) thick* low 10 - 20
Sausages, pre-boiled or raw* low 8 - 20
Hamburger, meatballs, rissoles* low 6 - 30
Meat loaf min 6 - 9
Gyros med 7 - 12
Ground meat med 6 - 10
Bacon min 5 - 8
Fish
Fish, fried, whole, e.g. trout low 10 - 20
Fish fillet, with or without breadcrumbs low - med 10 - 20
Shrimp med 4 - 8
Total frying time from signal
(mins.)
Egg dishes
Pancakes** max Omelette** min 3 - 6
Fried eggs min - med 2 - 6
Scrambled eggs min 4 - 9
Raisin pancake low 10 - 15
French toast** low 4 - 8
Potatoes
Fried potatoes; boiled in their skin max 6 - 12
French fries; made from raw potatoes med 15 - 25
Potato fritter** max 2,5 - 3,5
Glazed potatoes low 15 - 20
* Turn several times.
** Total cooking time per portion. Fry in succession.
15
Temperature
setting
Total frying time from signal
(mins.)
Vegetables
Garlic, onions min 2 - 10
Squash, egg plant low 4 - 12
Peppers, green asparagus low 4 - 15
Mushrooms med 10 - 15
Glazed vegetables low 6 - 10
Frozen products
Escalope med 15 - 20
Cordon bleu* med 10 - 30
Poultry breast* med 10 - 30
Chicken nuggets med 10 - 15
Gyros, kebab low 5 - 10
Fish fillet, with or without breadcrumbs low 10 - 20
Fish sticks med 8 - 12
French fries max 4 - 6
Stir-fried meals, e.g. fried vegetables with chicken low 6 - 10
Spring rolls med 10 - 30
Camembert/cheese low 10 - 15
Miscellaneous
Camembert/cheese low 7 - 10
Dry ready meals that require water to be added, e.g. pasta min 5 - 10
Croutons low 6 - 10
Almonds/walnuts/pine nuts med 3 - 15
* Turn several times.
** Total cooking time per portion. Fry in succession.
Setting the AutoChef® feature
Select the appropriate frying level from the chart. Place
the system pan in the center of the element. The cooktop
must be on.
1.
Select the element.
2.
Touch the AutoChef key. The ‘ lights up on the element display.
3.
Select the desired frying level using the number keys.
4.
Add the frying oil to the pan, then add the ingredients. Turn the food over as ususal to avoid burning.
Turning off AutoChef
®
Select the heating element and touch AutoChef.
Panel lock
You can use the child safety panel lock to prevent
children from accidentally turning the cooktop on.
The s symbol lights up on the display. The selected
frying level is displayed.
Turning the panel lock on
The cooktop must be turned off.
Touch Panel Lock for 4 seconds. The Ú indicator over
Panel Lock lights up for 10 seconds. The cooktop is now
locked.
Turning the panel lock off
Touch Panel Lock for 4 seconds. The child lock is now
deactivated.
The temperature symbol s stays lit until the
temperature is reached. Then a beep sounds, s
disappears.
16
9 CAUTION
The child lock may be accidentally turned on and off
due to:
▯ water spilled during cleaning
▯ food that has overflowed
▯ objects being placed on the Panel Lock key.
Automatic panel lock
With this function, the panel lock is automatically
activated whenever you turn off the cooktop.
Switching on and off: You can find out how to switch the
automatic panel lock on in the section ~ "Basic
settings"
Wipe Protection
Cleaning the control panel while the cooktop is on may
change the settings. In order to avoid this the cooktop
has a wipe protection function.
To activate: Touch the Panel Lock key. The
above the key lights up. The control panel is locked for
35 seconds.
You can now clean the surface of the control panel
without risk of changing the settings.
To deactivate: To deactivate the function before the time
has elapsed, touch the Panel Lock key. The Ú indicator
above the key turns off, the function is deactivated.
Notes
▯ An acoustic signal sounds 30 seconds after activation.
This indicates that the function is about to finish.
▯ The wipe protection function does not lock the main
switch. The cooktop can be switched off at any time.
Ú indicator
Automatic time limitation
If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
The element stops heating. ”‰ and the residual heat
indicator •/œ flash alternately in the display.
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1 to 10 hours).
Basic settings
The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Display Function
™‚
™ƒ
™†
™‡
Automatic child lock/panel lock
‹ Off*
‚ On
Audible signals
‹ Confirmation signal and error signals deactivated
‚ Only error signals activated
ƒ Only confirmation signals activated
„ All signals activated*
Automatic timer
‹ Off*
‚-ŠŠ Automatic shut-off time
Length of timer end signal
‚ 10 seconds*
ƒ 30 seconds
„ 1 minute
17
™ˆ
™Š
™‚ƒ
™‹
*factory settings
Power Management function
‹ = Off*
‚ = 1.000 W. minimum power
‚.= 1.500 W
ƒ = 2.000 W
etc.
Š or Š. = maximum power of the element
Selection time for heating element
‹Unlimited*: You can adjust the settings of the last heating element used at any time without hav-
ing to select it again.
‚Restricted: You can adjust the settings for the last heating element used within 10 seconds after
selecting it. After that you will have to reselect the heating element before setting it.
Cookware, Checking result of cooking process
‹Not suitable
‚Not perfect
ƒSuitable
Reset to basic settings
‹ Off*
‚ Reset the appliance to basic settings
Changing the basic settings
The cooktop must be turned off.
1.
Turn on the cooktop with the main switch.
2.
Within10 seconds, touch the Timer key for about 4 seconds.
The first four displays provide product information.
Touch the settings area to view the individual displays.
Product information Display
Directory for the Customer Service Index
(TK)
FD number
FD number 1
FD number 2
3.
Touching the Timer key again takes you to the basic settings.
In the display ™ and ‚ light up alternately and in the
timer display ‹ lights up as a default setting.
‹‚
”š
Š†.
‹.†
4.
Touch Timer repeatedly until the indicator for the desired function appears in the element display.
5.
Select the desired setting using the number keys.
6.
Touch Timer again for 4 seconds. The setting is stored.
Quit basic settings
Turn the cooktop off with the main switch.
18
Cleaning and Maintenance
Daily Cleaning
Note: : Bosch cleaners have been tested and approved
for use on Bosch appliances. Other recommended
cleaners do not constitute an endorsement of a specific
brand.
Glass ceramic cooktop
9 CAUTION
Do not use any kind of cleaner on the glass while
the surface is hot; use only the razor blade scraper.
The resulting fumes can be hazardous to your
health. Heating the cleaner can chemically attack
and damage the surface.
Clean the surface when it is completely cool with the
following exception: remove dry sugar, sugar syrup,
tomato products and milk immediately with the razor
blade scraper (see cleaning chart).
Wipe off spatters with a clean, damp sponge or a paper
towel. Rinse and dry. Use white vinegar if smudge
remains; rinse.
Apply a small amount of the glass ceramic cooktop
cleaner. When dry, buff surface with a clean paper towel
or cloth.
Stainless steel side trim
Wipe with the grain when cleaning. For moderate/heavy
soil, use BonAmi® or Soft Scrub® (no bleach).
Wipe using a damp sponge or cloth, rinse and dry.
Cleaning guidelines
When using a cleaner, use only a small amount; apply to
a clean paper towel or cloth. Wipe on the surface and
buff with a clean dry towel.
For best results, use a glass cooktop cleaner such as the
Bosch Glass Cooktop Cleaner (part number 12010030),
which can be ordered online at www.bosch-home.com/
us/store (for U.S. customers only). Other cleaners
include Bon Ami®, Soft Scrub® (without bleach), and
white vinegar.
Avoid these cleaners
▯ Glass cleaners which contain ammonia or chlorine
bleach. These ingredients may damage or
permanently stain the cooktop.
▯ Caustic cleaners - cleaners such as Easy Off® may
stain the cooktop surface.
▯ Abrasive cleaners.
▯ Metal scouring pads and scrub sponges such as
Scotch Brite® can scratch and/or leave metal marks.
▯ Soap-filled scouring pads such as SOS® can scratch
the surface.
▯ Powdery cleaners containing chlorine bleach can
permanently stain the cooktop.
▯ Flammable cleaners such as lighter fluid or WD-40.
Cleaning chart
Type of Soil Possible Solution
Dry sugar, sugar syrup, milk or tomato spills. Melted
plastic film or foil. All these items REQUIRE IMMEDIATE
REMOVAL. Failure to remove these immediatly can permanently damage the surface.
Burned-on food soil, dark streaks, and specks Soften by laying a damp paper towel or sponge on top of
Greasy spatters Use a soapy sponge or cloth to remove grease; rinse
Remove these types of spills while the surface is hot
using the razor blade scraper. Use a new, sharp razor in
the scraper. Remove pan and turn off the element. Wearing an oven mitt, hold scraper at 30° angle, using care
not to gouge or scratch the glass. Push soil off the
heated area. After the surface has cooled, remove the
residue and apply the glass ceramic cooktop cleaner.
9 WARNING
RISK OF INJURY
The blade is extremely sharp. Risk of cuts. Protect
the blade when not in use. Replace the blade immediately when any imperfections are found. Follow
manufacturer’s instructions.
soil for 30 minutes. Use a plastic scrubber and glass
ceramic cooktop cleaner or use the razor blade scraper.
Rinse and dry.
thoroughly and dry. Apply glass ceramic cooktop
cleaner.
19
Type of Soil Possible Solution
Metal marks: Iridescent stain Pans with aluminum, copper or stainless steel bases may
leave marks. Treat immediately after surface has cooled
with glass ceramic cooktop cleaner. If this does not
remove the marks, try a mild abrasive (Bon Ami®, Soft
Scrub® without bleach) with a damp paper towel. Rinse
and reapply glass ceramic cooktop cleaner. Failure to
remove metal marks before the next heating makes
removal very difficult.
Hard water spots:
Hot cooking liquids dripped on surface
Surface scratches:
Small scratches are common and do not affect cooking.
They become smoother and less noticeable with daily use
of the glass ceramic cooktop cleaner.
Minerals in some water can be transferred onto the surface and cause stains. Use undiluted white vinegar, rinse
and dry. Recondition with glass ceramic cooktop cleaner.
Remove boilovers and stains before using the cooktop
again.
Apply glass ceramic cooktop cleaner before using to
remove sand-like grains and grit such as salt and seasoning. Scratches can be reduced by using pans with
bases that are smooth, clean, and dry before use. Use
recommended glass ceramic cooktop cleaner daily.
NOTICE: Diamond rings may scratch the surface.
Maintenance
This appliance requires no maintenance other than daily
cleaning. For best results, apply cooktop cleaning cream
daily.
20
Service
Frequently-asked questions and answers (FAQ)
Using the appliance
Why can't I switch on the cooktop and why is the child lock symbol lit?
The child lock is activated.
You can find information about this function in section ~ "Panel lock"
Why are the displays flashing and why can I hear an acoustic signal?
Remove any liquid or food remains from the control panel. Remove any objects from the control panel.
You can find instructions on how to deactivate the audible signal in the section on ~ "Basic settings"
Noises
Why I can hear noises while I'm cooking?
Noises may be generated while using the cooktop depending on the base material of the cookware. These
noises are a normal part of induction technology. They do not indicate a problem.
Possible noises:
A low humming noise like the one a transformer makes:
Occurs when cooking at a high heat setting. The noise disappears or becomes quieter when the heat setting is reduced.
Low whistling noise:
Occurs when the cookware is empty. This noise disappears when water or food is added to the cookware.
Crackling:
Occurs when using cookware made from different layers of material or when using cookware of different
sizes and different materials at the same time. The volume of the noise can vary depending on the quantity
of food being cooked or the cooking method.
High-pitched whistling noises:
Can occur when two elements are used on the highest heat setting at the same time. The whistling noises
disappear or become quieter when the heat setting is reduced.
Fan noise:
The cooktop is equipped with a fan that switches on automatically at high temperatures. The fan may continue to run even after you have switched off the cooktop if the temperature detected is still too high.
Cleaning
How do I clean the cooktop?
Using a special glass-ceramic cleaning agent produces the best results. We advise against using harsh or
abrasive cleaning agents, dishwater detergent (concentrated) or scouring pads.
You can find more information about cleaning and caring for your cooktop in the section on
21
Fixing Malfunctions
9 CAUTION
Malfunctions are usually due to small details. Before
calling Customer Support, you should consider the
following advice and warnings.
Repairs should only be done by an authorized
servicer.
Improper repair of your appliance may result in risk
of severe physical injury or death.
Display Possible cause Solution
None The power supply has been discon-
nected.
The device has not been connected in
accordance with the connection dia-
Use other electrical devices to check whether a
short-circuit has occurred in the power supply.
Ensure that the device has been connected in
accordance with the connection diagram.
gram.
Electronics error. If the error cannot be eliminated, inform Customer
Support.
The displays flash The control panel is damp or an
Dry the control panel or remove the object.
object is covering it.
The Ù indicator flashes
in the element displays
”ƒ
”…
An error has occurred in the electronics.
The electronics have overheated and
have switched off the corresponding
element.
The electronics have overheated and
To confirm the error, cover the control panel with
your hand.
Wait until the electronics have cooled down sufficiently. Then touch any symbol on the cooktop. If
the warning persists, call Customer Support.
have switched off all elements.
Ӡ + heat setting and
acoustic signal
There is a hot pan in the area of the
control panel. There is a risk that the
Remove the pan. The error display goes out shortly
afterwards. You can continue to cook.
electronics will overheat.
Ӡ and acoustic signal
There is a hot pan in the area of the
control panel. To protect the electronics, the element has been switched
Remove the pan. Wait for a few seconds. Touch
any control. If the error display goes out, you can
continue to cook.
off.
”‚/”‡
The element has overheated and
switched itself off to protect the work
Wait until the electronics have cooled down sufficiently and switch the element on again.
surface.
”‰
“Š‹‹‹
“Š‹‚‹
“Š‹‚‚
The element was operating for an
extended period without interruption.
The supply voltage is incorrect; outside of the normal operating range.
The cooktop is not connected properly.
The automatic safety switch-off function has been
activated. See section “Automatic time limitation”
Contact your electrical utility provider.
Disconnect the cooktop from the power supply.
Ensure that it has been connected in accordance
with the connection diagram.
Do not place hot pans on the control panel.
Notes
▯ If “ appears on the display, the sensor for the element
in question must be held down in order to be able to
read the fault code.
▯ If the fault code is not listed in the table, disconnect
the cooktop from the power supply, wait 30 seconds,
and then reconnect it again. If the display appears
again, contact Customer Support and tell them the
precise fault code.
▯ If a fault occurs, the appliance will not switch to
standby mode.
22
Suitability test of cookware
This function can be used to check the speed and quality
of the cooking process depending on the cookware.
The result is a reference value and depends on the
properties of the cookware and the element being used.
1.
With the cookware still cold, fill it with approx. 8 oz. (200 ml) of water and place it on the center of the cooking zone with the diameter that most closely matches that of the base of the cookware.
2.
Go to the basic settings and select the ™‚ƒ setting.
3.
Touch the settings range. A will flash on the cooking zone display.
The function has now been activated.
After 10 seconds, the result for the quality and speed of
the cooking process will appear on the cooking zone
display.
How to Obtain Warranty Service
To obtain warranty service for your Product, you should
contact the nearest Bosch authorized servicer.
E number and FD number
When you contact our service, please have the Model
(E) number and the FD number for your appliance
available.
You can find the identification plate with these numbers:
▯ in the appliance booklet
▯ on the underside of the appliance
You can also find the (E) number on the glass ceramic of
your cooktop. You can check the Customer Service
Index (TK) and the FD number in the basic settings.
Please refer to the section on ~ "Basic settings"
Questions? Please contact us. We look forward to
hearing from you.
Check the result using the table below:
Result
The cookware is not suitable for the element and
‹
will therefore not heat up.*
The cookware is taking longer to heat up than
‚
expected and the cooking process is not going as
well as it ought to.*
The cookware is heating up correctly and cooking
ƒ
is progressing well.
* If there is a smaller element available, try the cook-
ware again on the smaller element.
To reactivate this function, touch the settings range.
Notes
▯ If the diameter of the used cooking zone is much
smaller than the diameter of the cookware, only the
middle of the cookware can be expected to heat up.
This may result in the cooking results not being as
good as expected or being less than satisfactory.
▯ You can find information on this function in the section
~ "Basic settings"
▯ You can find information on the type, size and
positioning of the cookware in the section
~ "Cooking with Induction"
ZZZERVFKKRPHFRP
0DLQ6WUHHW6XLWH
,UYLQH&$
23
Loading...