Bosch NEZ-5130-PPCW4 Specsheet

Video | AUTODOME IP 5000 HD

AUTODOME IP 5000 HD

www.boschsecurity.com

u Choice of 720p25/30 or 1080p25/30 HD resolution,

30x optical zoom with Bosch’s imaging platform
specially designed and tuned for accurate color
reproduction in scenes with varying lighting levels
from day to night

With AUTODOME IP 5000 HD cameras, you can
capture full details of your surveillance space while
effectively tracking moving targets. The camera uses
robust algorithms to ensure the subject stays in full
focus when the camera is zooming in or tracking to
assist security staff in identifying activity details in the
scene. The 30x zoom lens with 720p25/30 or
1080p25/30 HD resolution ensures a sufficient
magnification ratio to identify people easily from a
distance of up to 190 m (623 ft) for 1080p models and
up to 125 m (410 ft) for 720p models.
The AUTODOME IP family, in combination with the
Video Security App from Bosch, makes it easier for you
to stay in control of your security even when you’re on
the go. With the camera’s built-in
Dynamic Transcoding technology, you can easily
stream high-resolution H.264 video, pan/tilt/zoom the
camera, and search recorded clips remotely through
mobile devices such as smart phones or tablets, all on
a low-bandwidth network connection (up to 50% less
than other H.264 PTZ cameras).

u Identification of people up to 190 m (623 ft) without

loss of any details

u Simple single cable installation with PoE+ support

for indoor/outdoor application

u High-speed PTZ control for tracking people and

vehicles in large indoor/outdoor scene

u Exceptional low bit rates in static scenes to save the

storage cost by up to 50% compared to any
equivalent dome in the market

The camera provides complete network-based control
of all functionality including pan/tilt/zoom operation,
presets, tours, alarms, and web-based configuration of
all camera settings.

Functions

Superior imaging performance

Designed using Bosch’s digital imaging platform,
AUTODOME IP 5000 HD cameras deliver high­resolution, zoomed-in views for indoor and outdoor
applications with large coverage areas.

Three (3) pre-programmed user modes

The camera comes with three (3) pre-tuned scene
modes to match various lighting conditions found in
indoor scenes. Users can complete the configuration
without going through multiple imaging settings.

• Indoor: general day-to-night changes without sun
highlights and street lighting

• Outdoor: general day-to-night changes with sun
highlights and street lighting

• Vibrant: enhanced contrast, sharpness and saturation

| AUTODOME IP 5000 HD

2

Sodium vapor lamp white balance

The camera is an exceptional performer when
capturing video under a sodium vapor lamp (a street
lamp or tunnel lamp, for example). Uncorrected
images under these conditions have a yellowish tint,
which can make identification difficult. In the Sodium
Vapor White Balance mode, the camera automatically
compensates for the light from a sodium vapor lamp to
restore objects to their original color.

Superior privacy masking

For installations in public places where privacy of
private property is of high concern, the camera
provides 24 individual, easy-to-configure privacy
masks, with up to 8 displayed in the same scene. As
the camera is zoomed, each mask changes size
smoothly and quickly, ensuring that the covered object
cannot be seen in most cases.

PTZ drive and mechanism

The camera supports 256 pre-positions and two styles
of Guard Tours: Preset and Record/Playback. The
preset tour has capability for up to 64 pre-positions
with a configurable dwell time between pre-positions
and can be customized as to the order and frequency
each preset is visited. The camera also provides
support for two (2) recorded tours, which have a total
duration of 15 minutes of movements. These are
recorded macros of an operator’s movements,
including pan, tilt, and zoom activities, and can be
played back in a continuous manner
Pan and tilt preset repeatability are accurate to within
±0.2 degrees to ensure that the correct scene is
captured every time. The camera delivers maximum
pan speed of 300 degrees per second and maximum
tilt speed of 200 degrees per second. The camera is
capable of manual speeds (pan and tilt) of 1 to 120
degrees per second. The camera provides a pan range
of up to 360 degrees continuous rotation.
The camera’s tilt angle is from 0° to ±90°.

Intelligent Dynamic Noise Reduction reduces
bandwidth and storage requirements

The camera uses Intelligent Dynamic Noise Reduction
which actively analyzes the contents of a scene and
reduces noise artifacts accordingly.
The low-noise image and the efficient H.264
compression technology provide clear images while
reducing bandwidth and storage by up to 50%
compared to other H.264 cameras. This results in
reduced-bandwidth streams that still retain a high
image quality and smooth motion. The camera
provides the most usable image possible by cleverly
optimizing the detail-to-bandwidth ratio.

Area-based encoding

Area-based encoding is another feature which reduces
bandwidth. Compression parameters for up to eight
user-definable regions can be set. This allows
uninteresting regions to be highly compressed, leaving
more bandwidth for important parts of the scene.

User can configure encoding regions for every
configured preset (scene), to increase or decrease the
encoding quality for selectable areas of the video
image. These regions give better control of the bit
rate. Important parts of the scene (identified as
objects in the GUI) are encoded at high resolution and
therefore have an enhanced encoding quality. Less
important parts (such as the sky and trees in the
background, all identified as backgrounds in the GUI)
are encoded at lower quality and therefore have a
decreased encoding quality.

Intelligent Defog

Users can configure the mode to activate automatically
when the global contrast enhancement method in the
camera detects fog and adds light to the video image
(and then deactivates when the fog clears or the scene
changes).

Advanced streaming

The camera offers advanced streaming capabilities so
that you can configure the camera to take advantage of
the latest network technology.
The camera is designed on an efficient and powerful H.
264 encoding platform capable of delivering high­quality HD video with very low network load. The new
intelligent encoding capabilities drop the bandwidth
consumption to extremely low levels if the camera
detects no motion in the scene.
The camera is capable of quad streaming which allows
the camera to be configured to deliver independent,
configurable streams for live viewing, recording, or
remote monitoring on over bandwidth-constrained
networks.

Recording and storage management

A memory card (a maximum of 32 GB microSDHC / 2
TB microSDXC) can be used for local alarm recording
or for scheduled local recording to improve the overall
recording reliability. Recording management can be
controlled by the Bosch Video Recording Manager
(VRM), or the camera can use iSCSI targets directly
without any recording software.

Alarm handling and Motion Detection

A wide range of configuration options is available for
alarms signaling the camera. A built-in algorithm for
detecting movement on presets can also be used for
alarm signaling, or the camera can interface to an
external alarm source using the built-in alarm I/O
ports. In addition, a user can also schedule virtual
alarms. Any of the available external alarm, motion
alarm or scheduled virtual alarms can then be used to
trigger a relay output or to force the camera to do
certain tasks (for example, to start a guard tour or to
go to a preset location).

Access security

Password protection with three levels and 802.1x
authentication is supported. To secure Web browser
access, use HTTPS with a SSL certificate stored in the

3 | AUTODOME IP 5000 HD

camera. The video and audio communication channels
can be independently AES encrypted with 128-bit keys
by installing the optional encryption site license.

Complete viewing software

There are many ways to access the camera’s features:
using a web browser, with the Bosch Video
Management System, with the free-of-charge
Bosch Video Client, with the Video Security App, or via
third-party software.

Bosch Video Security app

The AUTODOME IP cameras fully support
Dynamic Transcoding technology from Bosch, which –
in combination with the Video Security App from
Bosch– provides 24/7 remote access to camera
controls, live video streams, recordings and HD images
from anywhere, regardless of available bandwidth.
Dynamic Transcoding automatically adjusts the bit rate
to the available bandwidth to ensure smooth video
streaming. When the video is paused at an incident, a
full HD still image is shown instantly. To gain all
benefits of Dynamic Transcoding, simply expand the IP
video surveillance system with either a DIVAR IP
recording solution or a VIDEOJET XTC from Bosch.

System integration

The camera conforms to the ONVIF Profile S
specifications. This ensures interoperability between
network video products regardless of manufacturer.
Third-party integrators can easily access the internal
feature set of the camera for integration into large
projects. Visit the Bosch Integration Partner Program
(IPP) website (ipp.boschsecurity.com) for more
information.

Ease of installation and servicing

The camera has been designed for quick and easy
installation, a key feature from Bosch IP video security
products.
Bosch designed the camera with the knowledge that
field cables and mounts are installed before the
camera is mounted. The new installation concept
allows a single person to connect the cables directly
to the camera without re-routing cables. The camera is
easily secured to the mount with a single screw. The
three-step installation process can save up to 5
minutes per camera installation compared to any
conventional PTZ dome.
Indoor/outdoor pendant housings are rated to provide
IP66 protection and offer an operating temperature
range down to -40 °C (-40 °F). The indoor/outdoor
camera comes fully assembled with a sunshield and
ready for wall or pipe applications with the proper
mounting hardware (sold separately). You can easily
convert the outdoor pendant for indoor applications
by removing the sunshield.
Bosch offers a full complement of hardware and
accessories (sold separately) for wall, corner, mast,
roof, pipe mount, and in-ceiling applications for indoor
and outdoor environments, which allow the camera to
be adapted easily to individual site requirements.

Dual power options

All models can be powered by a IEEE 802.3at PoE+
switch or a 24 VAC power supply. When powered
using PoE+ (IEEE 802.3at class 4) configuration, only a
single cable connection is required to power and to
control the camera while also viewing images from the
camera. For additional system reliability, users also
have the option to connect the 24 VAC power supply
to the camera while using PoE+.

Easy upgrade

Remotely upgrade the camera whenever new firmware
becomes available. This ensures up-to-date products,
thus protecting investment with little effort.

Unsurpassed reliability

As with all Bosch products, the camera is designed
using the industry’s best design process and is
subjected to the most stringent testing standards such
as HALT (highly accelerated life testing), which pushes
the limits of products to ensure reliability throughout
their lifetime.

Certifications and approvals

HD standards

• Complies with the SMPTE 274M-2008 Standard in:

– Resolution: 1920x1080
– Scan: Progressive
– Color representation: complies with ITU-R BT.709
– Aspect ratio: 16:9
– Frame rate: 25 and 30 frames/s

• Complies with the 296M-2001 Standard in:

– Resolution: 1280x720
– Scan: Progressive
– Color representation: complies with ITU-R BT.709
– Aspect ratio: 16:9
– Frame rate: 25 and 30 frames/s

Marking Applicable Standard

cULus • UL60950-1/-22 (ed 2) (Includes CSA

22.2 No. 60950-1/-22)

FCC Part 15 (USA) • 47CFR Part 15

• ICES-003 (Canada)

CE (Europe) Electromagnetic Compatibility (EMC) Directive

• EN 55022:2010

• EN 50130-4:2011

• EN 61000-3-2:2014

• EN 61000-3-3:2013
Product Safety: Low Voltage Directive (IECEE
CB scheme certificate and report are
required)

• EN

60950-1:2006+A11:2009+A1:2010
+A12:2011+A2:2013 (with national
differences)

• IEC 60950-1/-22 (ed 1)

Other labels /
markings

• RCM