Bosch MIC440AXBUA14636P, MIC440AXBUA14618N, MIC440AXBUW14636N, MIC440AXWUA14618N, MIC440AXWUA14618P Specifications
...
CCTV | MIC Series 440 Explosion-Protected Camera
The MIC Series 440 explosion-protected camera has been
designed to offer an extremely reliable, robust, and high
quality surveillance solution for potentially volatile
security applications that demand the very best
performance. Precision engineered to exacting standards,
the range meets the requirements of ATEX Directive 94/9/
EC Exd IIC T6 and CSA Class I, Division 1, Groups CD,
Class II, Division 1, Groups EFG, T6 for safe use in
explosive atmospheres such as those found in oil, gas,
chemical processing sites, and petrochemical refineries.
Rated to an industry leading IP68, the specially designed
camera housing is machined from solid aluminum. The
MIC Series 440 camera ensures corrosion protection by
using two different processes; first an Alochrom 1200
coating, then a robust polyester powder paint coating.
Alocrom 1200 is a chromate conversion coating of
aluminum, used in the aerospace and defense industries
where a protective layer is required to improve corrosion
resistance. Sealed with 'O'-rings, the MIC Series 440
camera can operate permanently submerged up to 1
meter (3.3 feet) underwater by virtue of its design and
construction, suitable for installation in the harshest of
environments. The optically-perfect flat viewing window
and integrated wiper ensure razor sharp images are
captured in even the most demanding conditions. This
allows the MIC Series 440 explosion-protected range to
function perfectly in highly hazardous areas, such as
offshore oil rigs.
The use of high-specification motors ensures reliable
operation, while ground-breaking resolver technology
provides pin-point accuracy and affords the user full 360°
continuous rotation pan, and an unprecedented 320° tilt,
control.
A choice of true day/night camera modules, offering up to
36x optical zoom (12x digital), coupled with flexible
upright or inverted mounting capability, allows the perfect
field of view to be achieved every time.
Functions
ATEX and CSA Certified
Meets the requirements of ATEX Directive 94/9/EC Exd IIC
T6 and CSA Class I, Division 1, Groups CD, Class II,
Division 1, Groups EFG, T6 for safe use in explosive
atmospheres.
Rated to an industry leading IP68
Zero dust ingress and ability to withstand sustained
periods of immersion under water, the MIC Series 440
explosion-protected range is perfectly suited for
installation, in even the most unforgiving environments.
MIC Series 440 Explosion-Protected
Camera
▶
Explosion-protected unit certified to ATEX Directive
94/9/EC Exd IIC T6
▶
CSA and Inmetro certified
▶
Industry leading IP68 rating
▶
Integrated wiper
www.boschsecurity.com
2 | MIC Series 440 Explosion-Protected Camera
Integrated wiper
Regardless of the weather, the MIC Series 440 explosionprotected camera is able to capture the highest possible
quality image year round, thanks to its integrated wiper.
Certifications and Approvals
Approvals
Region Certification
Europe CE
Sira Examination, Issue 8
Canada CSA
ATEX certified Directive 94/9/EC Exd IIC T6
CSA C/US Class I, Division 1, Groups CD
Class II, Division 1, Groups EFG
Temperature Code T6
Electromagnetic Compatibility
(EMC)
Complies with FCC part 15,
ICES-003, and CE regulations, including EN50130-4,
EN61000-3-2:2006,
EN61000-3-3:1995, and
EN55022:2006 inc AL:2007
Safety Complies with CE regulations, UL,
EN, and IEC standards 60950-1 &
22
Technical Specifications
Camera Module
Image sensor 1/4‑inch EXview CCD
Picture elements 380 K NTSC / 440 K PAL (WIDE)
Horizontal resolution 18x module:
470 TVL NTSC/PAL typical
36x module:
470 TVL NTSC/PAL typical
Filter Automatic mechanical IR cut filter
Focus system Auto or manual
Iris Auto or manual with slow shutter in-
tegration modes
Synchronization Internal / External (V‑Lock)
Recommended illumination 100 to 100,000 lx
Signal/Noise ratio 50 dB or more
Back Light Compensation (BLC) On/Off
White balance Automatic
Automatic Gain Control (AGC) –3 to –28 dB, 2 dB steps
Aperture control 16 Steps
18x optical zoom module
Lens F=4.1 mm (WIDE) to 73.8 mm (TELE), F1.4 to F3.0
Zoom 18x optical (12x digital)
Angle of view 48º (WIDE end) to 2.8º (TELE end)
Minimum illumination
0.7 lux (F1.4, 1/60s NTSC, 1/50s PAL), 0.11 lux
(F1.4, 1/4s NTSC, 1/3s PAL), 0.01 lux or less
(F1.4, 1/4s NTSC, 1/3s PAL, ICR ON)
Shutter speed 1/1 to 1/10,000s (22 steps) NTSC, PAL
36x optical zoom module
Lens F=3.4 mm (WIDE) to 122.4 mm (TELE), F1.6 to
F4.5
Zoom 36x optical (12x digital)
Angle of view 57.8º (WIDE end) to 1.7º (TELE end)
Minimum illumination
1.4 lux (1/60 s NTSC, 1/50 s PAL, typical)
0.1 lux (1/4 s NTSC, 1/3 s PAL, typical)
ICR-ON mode: 0.01 lux (1/4 s NTSC, 1/3 s PAL)
Shutter speed 1/4 to 1/10,000s (20 steps) NTSC, 1/3 to
1/10,000s (20 steps) PAL
Operational
Auto flip Yes
Manual flip Yes
Presets 64 telemetry presets utilizing resolver technology (us-
ing FV protocol, 10 camera set-up presets to allow
ANPR, color correction, etc.)*
Preset tours 6 tours each with up to 32 presets
Sector titles Yes (64 sectors) 20 characters per title
Preset titles 20 character caption for each of the 64 presets
Home position Yes (preset 1 or tour)
*Functions available when used with the Forward Vision
Protocol, other protocols may vary.
Communication and Protocols
Communication RS485 / RS422
Control protocol Bosch, Forward Vision, Pelco, American Dynamics,
and VCL protocol variants available.
Bi-phase control requires Biphase to RS485 converter (MIC-BP4) to be installed in the power supply
(available separately).
Connectivity
Video Co-axial via composite cable
Telemetry Twisted pair. Simplex, half and full duplex opera-
tion via composite cable
Power Via composite cable
Alarms
Alarm inputs 1 tamper input (additional inputs possible with
optional alarm card in PSU)
Alarm communication Tamper switch (ground connection)
Loading...