Bosch LTC-9488-21 Specsheet
277
10.9
196
7.7
50.8
2.0
20
0.8
107
4.2
96
3.8
8
0.3
89
3.5
73.7
2.9
mm
in
Video | LTC 9480 and LTC 9488 Series Housings Outdoor
LTC 9480 and LTC 9488 Series Housings
Outdoor
www.boschsecurity.com
u For 1/4-inch, 1/3-inch and 1/2-inch CCD Cameras
u Feed-through Wiring Option
The LTC 948x Series Housings are smartly styled
housings for outdoor use. These housings meet
customers' demands for attractive housings that are
both cost competitive and easy to install. They are
available in multiple sizes to fit a wide range of
cameras and lenses.
Functions
The design of these housings is unique. Removal of
two captive screws is all that is necessary to slide off
the cover and totally expose the camera and lens. This
allows access to all camera and lens controls when the
camera is in its mounted position. Power, video, and
lens control cabling can be routed through liquid tight
fittings in the bottom rear of the housing or can be
routed through the mounting base. Feed-through
mounts and J-mounts are available for these housings
to completely hide the cabling.
The base of the housings permits mounting to pan/
tilts, adjustable heads, and various wall mounts.
These sturdily constructed housings are available with
a preinstalled heater or a preinstalled heater and
blower. The heater maintains the internal temperature
u Aluminum and Advanced Polymer Construction
u Easy Installation
u Full Camera Accessibility
of the housing in cold temperature conditions and the
heater/blower combination minimizes fogging in high
humidity locations and extends the temperature limits.
Installation/configuration notes
LTC 9480 Series
521
20.5
122
4.8
20
0.8
323
12.7
8
0.3
73.7
2.9
89
3.5
mm
in
50.8
2.0
132
5.2
2 | LTC 9480 and LTC 9488 Series Housings Outdoor
Cable Entry
LTC 9480 Series Outdoor Housing
Two (2) liquid tight rear fittings accept cable diameters from 4.3 mm to
11.9 mm (0.17 in. to 0.47 in.).Two (2) bottom feed-through liquid tight
fittings accept cable diameters from 4.6 mm to 7.9 mm (0.18 in. to
0.31 in.).
LTC 9488 Series Outdoor Housing
Three (3) liquid tight rear fittings, two (2) of which accept cable
diameters from 4.3 mm to 11.9 mm (0.17 in. to 0.47 in.) and one (1)
that accepts cable diameters from 4.6 mm to 7.9 mm (0.18 in. to
0.31 in.).Two (2) bottom feed-through liquid tight fittings accept cable
diameters from 4.6 mm to 7.9 mm (0.18 in. to 0.31 in.).
LTC 9488 Series
Technical specifications
Electrical
Model No. Preinstalle
d Heater
or Heater/
1)
Blower
Volt / Power Camera Models
with these
Voltage Ratings
Outdoor Units
LTC 9480/xx
2
LTC 9488/xx
2
- - 24 VAC
- - 24 VAC
115 VAC
230 VAC
Outdoor Units
LTC 9480/202)Heater 24/15 V/W 24 VAC
LTC 9488/20 Heater 24/40 V/W 24 VAC
LTC 9488/21 Heater/Blower 24/42 V/W 24 VAC
LTC 9488/50 Heater 230/40 V/W 230 VAC
LTC 9488/60 Heater 115/40 V/W 115 VAC
LTC 9488/61 Heater/Blower 115/45 V/W 115 VAC
1. The heaters and blowers for all models operate at 50/60 Hz.
2. Available with wall-mount; add “MT” suffix.
Mechanical
Window 3 mm (0.12 in.) thick UV-stabilized
polycarbonate.
Housing
Mounting
Four (4) available 1/4-20 tapped holes. Only one
set of two is required for mounting.
Camera Mounting Removable camera bracket. Mounted with two
screws.
Construction Aluminum cover, aluminum base, aluminum
mounting foot, polycarbonate faceplate, glass
reinforced polycarbonate end caps, neoprene
gasket, ethylene propylene seal, and all stainless
steel hardware.
Finish Dark mushroom.
Dimensions See drawings.
Weight (approx.) LTC 9480 Series:1.4 kg (3 lb)
LTC 9488 Series:3.2 kg (7 lb)
Environmental
Temperature At external temperature of –40 °C to 50 °C (–
40 °F to 122 °F), maintains internal temperatures
between –20 °C and 55 °C (–4 °F to 131 °F) with
heater/blower.
Salt Atmosphere MIL-STD-810E, Method 509, Procedure 1.
Enclosure Protection IP65, Designed to meet NEMA- 4
Electromagnetic Compatibility
Safety UL, cUL, CE
Maximum Camera and Lens (W x H x L):
LTC 9480/20 68 x 58 x 197 mm (2.68 x 2.6 x 7.75 in.)
LTC 9488/20 71 x 71 x 356 mm (2.8 x 2.8 x 14.0 in.)
LTC 9488/50 71 x 71 x 356 mm (2.8 x 2.8 x 14.0 in.)
LTC 9488/60 71 x 71 x 356 mm (2.8 x 2.8 x 14.0 in.)
LTC 9488/21 71 x 71 x 318 mm (2.8 x 2.8 x 12.5 in.)
LTC 9488/61 71 x 71 x 318 mm (2.8 x 2.8 x 12.5 in.)
1. With Heater
2. With Heater and Blower
1
1
1
1
2
2
Accessories
Sunshield Provides protection from the direct rays of sun and
promotes cooling to reduce internal housing
temperatures. Strongly recommended for housing that is
to be used outdoors.
LTC 9083/01S For LTC 9480 Series housings
LTC 9088/01 For LTC 9488 Series housings
LTC 9080/00 Tamper
Resistant Kit
Includes ten 10 screws and insertion tool to
permit tamper resistance for five (5)
housings.
Loading...