Bosch LTC-8809-02 Specsheet
CCTV | Accessory Packages for the Allegiant
Accessory Packages for the Allegiant
The Allegiant accessory products provide many optional
features to the base Allegiant Video Switcher/Control
System. Various accessory products are available, including
operator keyboards, code distribution units, data
converters, receiver/drivers, and various port expanders.
Where applicable, all accessory products are designed to
be compatible throughout the Allegiant systems.
In addition to Allegiant accessories, this data sheet also
includes brief information on other products typically used
with the Allegiant Series of matrix switchers.
In some cases, complete information for a product is found
in a separate datasheet.
Accessory Items
Model No. Description
IntuiKey Series Keyboard
LTC 8555 Series Keyboard
LTC 8558/00 Keyboard Extension Cable
LTC 8557 Series Keyboard Extension Kits
LTC 8568/00 Signal Distribution Unit
LTC 8768/00 Signal Distribution Unit
LTC 8540/00 Alarm Interface Unit
AutoDome Series PTZ Cameras
LTC 8560 Series Receiver/Drivers
LTC 8561 Series Receiver/Drivers
LTC 8562 Series Receiver/Drivers
Model No. Description
LTC 8563 Series Receiver/Drivers
LTC 8564 Series Receiver/Drivers
LTC 8566 Series Receiver/Drivers
LTC 8569 Series Code Merger Units
LTC 8570 Series Code Merger Units
LTC 8571 Series Code Merger Units
LTC 8572 Series Code Merger Units
LTC 8770 Series Relay Units
LTC 8712 Series Console Port Expander Units
LTC 8713 Series Alarm Port Expanders
LTC 8714 Series Keyboard Port Expanders
LTC 8715 Series Keyboard Port Expanders
LTC 8780 Series Data Converter Units
LTC 8782 Series Code Translator Units
LTC 8785 Series Code Converter Units
LTC 8786 Series Code Converter Units
LTC 8016/90 Bilinx Data Interface Unit
LTC 8808/00 Video Interconnect Panel/Cables
LTC 8807/00 Video Interconnect Panel
LTC 8809 Series Ribbon Cables
LTC 8506/00 Cable, PC-to-Console Port
LTC 8508/01 Ribbon to BNC Interface Cable
www.boschsecurity.com
2 | Accessory Packages for the Allegiant
Certifications and Approvals
Electromagnetic
Compatibility (EMC)
Complies with FCC Part 15, ICES-003 and CE regulations
Product Safety Complies with CE regulations, UL, CSA, EN and IEC
Standards
Technical Specifications
General Specifications
Environmental
Note: Specifications for electronic hardware products are noted below unless otherwise specified in applicable accessory section.
Temperature
Operating 4°C to 50°C (40°F to 122°F)
Humidity 0% to 95% relative, non-condensing
Shock 50 g, 11 ms, ½ sine
Altitude 3000 m (10,000 ft)
IntuiKey Keyboard
The IntuiKey KBD-Universal is a full function keyboard used
for control and programming of the Allegiant Series matrix
switchers. Backlit LCD screens provide multi-language
display of softkey menus and status information. Integral
variable speed joystick and zoom lens controls are standard
for operating fixed or variable speed pan/tilt/zoom
equipped cameras. In addition to the Allegiant Series, the
KBD- Universal model IntuiKey can be used to
simultaneously control Divar Series DVRs, and System4
Series multiplexers.
The optional PC-based IntuiKey Script Application software
package can be used to define softkeys that are used to
activate Allegiant system Command Scripts.
The optional KBD-RACK rack-mounting kit is designed to
provide vertical, horizontal, or 45 degree inclined mounting
into standard EIA 48 cm (19 in.) rack.
Refer to the IntuiKey Series data sheet for complete
specifications.
LTC 8555 Series Keyboards
The LTC 8555 Series are compact, full function keyboards
for use with Allegiant Series matrix switchers. LED readouts
display real time system status information. Includes
variable speed joystick and zoom lens controls for operating
fixed or variable speed pan/tilt/zoom equipped cameras.
The keyboards are available in the following configurations:
Model Number Top Bezel Graphics Communication Protocol
LTC 8555/00 English RS-485
LTC 8555/01 Icons RS-485
LTC 8555/02 English RS-232
LTC 8555/03 Icons RS-232
Electrical
Operating Voltage 12 VAC (supplied by main Allegiant CPU bay or
optional Keyboard Extension Kit)
Signal 2 wire RS-485, 9600 baud (LTC 8555/00 and
LTC 8555/01 models) 3 wire RS-232,
9600 baud (LTC 8555/02 and LTC 8555/03
models)
Connectors One (1), 6-contact connector for data/power
Mechanical
Construction/
High impact plastic case with charcoal color
Finish
Dimensions
220 x 51 x 155 mm (8.67 x 2.00 x 6.11 in.)
(W x D x H)
Weight 0.55 kg (1.22 lb)
LTC 8558/00 Keyboard Extension Cable
Six-conductor extension cable carries data/power for
remote IntuiKey Series or LTC 8555 Series keyboards up to
30 m (100 ft) away from main Allegiant CPU bay.
LTC 8557 Series Keyboard Extension Kits
Interface kit used to remote IntuiKey Series or LTC 8555
Series keyboards up to 1.5 km (5000 ft) away from main
CPU bay. Customer supplied 0.5 mm2 (24 AWG) shieldedtwisted pair (Belden 9841 or equivalent) required between
main CPU bay site and keyboard site. Kit provides two
junction boxes, interface cable, and appropriate keyboard
power supply.
Electrical
Model No.
Rated Voltage
LTC 8557/60 120 VAC,
1
Voltage Range Power
108 to 132 10 W
50/60 Hz
LTC 8557/50 230 VAC,
198 to 264 15 W
50/60 Hz
1. Input voltage of included power supply.
Indicators Junction box mounted power LED
Connectors One (1), 4-position screw terminal block. One (1),
6-contact keyboard cable connector.
Mechanical
Construction/
Finish
Dimensions
Surface mountable, flat black painted metal enclosure
121 x 70 x 35 mm (4.75 x 2.75 x 1.375 in.)
(W x D x H)
Weight 170 g (6 oz.)
LTC 8568/00 Signal Distribution Unit
Main site Bi-Phase control code distribution and line driver
unit for communicating to AutoDome Series cameras,
receiver/drivers, switcher/ followers, and Allegiant satellite
systems. The unit provides 32 separate outputs for driving
up to 256 remote devices. Either “star” or “daisy chain”
wiring configurations may be used. Two meter (6 ft)
Accessory Packages for the Allegiant | 3
interface cable for data/power between unit and main
Allegiant CPU bay supplied. Not applicable to the LTC 8100,
LTC 8200, and the LTC 8300 Series systems.
Electrical
Operating Voltage 12 VAC (supplied by main CPU bay)
Power 3 W
Indicators
Power
•
Code
•
Connectors
Input One (1), 9-pin Sub D connector for data/power
Outputs Sixteen, 6-contact removable screw terminal blocks
Mechanical
Construction/
Finish
Dimensions
(W x D x H)
Weight 1.8 kg (4 lb)
LTC 8768/00 Signal Distribution Unit
Same features and specifications as the LTC 8568/00
except that it contains twice the number of output
connectors which provide 64 separate outputs for driving
up to 512 remote devices. Not applicable to the LTC 8100,
LTC 8200, and the LTC 8300 Series systems.
LTC 8540/00 Alarm Interface Unit
Unit accepts up to 64 contact closures or logic level inputs
from remote sensing devices such as door contacts, PIRs,
etc. and then reports the “alarm” information to the main
Allegiant CPU bay. Alarm inputs may be configured in
groups of 32 to accept either normally open or normally
closed contacts. Unit also contains eight relay outputs that
activate automatically upon alarm conditions. A two meter
(6 ft) interface cable for data/power between unit and main
CPU bay is supplied. Not applicable to the LTC 8100,
LTC 8200, and the LTC 8300 Series systems.
Electrical
Operating Voltage 12 VAC or 12 VDC
Power 8 W
Indicators
Power LED
Alarm LED; audible tone
Connectors
Alarm Inputs Sixty-four (64); twenty 6-contact removable screw
LED
LED
for code output. Maximum transmission distance is
1.5 km (5000 ft) using 1 mm2 (18 AWG) shieldedtwisted pair (Belden 8760 or equivalent).
Charcoal colored metal enclosure
445 x 318 x 89 mm (17.5 x 12.5 x 3.5 in.)
Integral mounting flanges for EIA 48 cm (19 in.) rack
(12 VAC is supplied by main CPU bay)
terminal blocks
Alarm Outputs Eight (8) relay outputs (100 VDC, 0.5 A, 10 W); four
(4), 6-contact removable screw terminal block.
Data/Power One 9-pin Sub D connector
Mechanical
Construction/
Finish
Dimensions
(W x D x H)
Weight 1.8 kg (4 lb)
AutoDome and AutoDome Easy IISeries
The AutoDome® and the AutoDome Easy II Series of cameras
integrates high-speed panning and tilting, 360-degree
continuous rotation, pre-positions, etc. in a small, easy-toinstall lightweight package. These PTZ models are available
with various mounting and configuration options for use in
both internal and external environments.
Refer to the AutoDome and the AutoDome Easy II Series
datasheets for complete specifications.
LTC 8560, LTC 8561, LTC 8562, LTC 8563, LTC 8564, and
LTC 8566 Series Receiver/Drivers
These series of on-site receiver/drivers are designed to
receive Bi-Phase control code and convert this data into
signals for controlling conventional pan/tilt, zoom lenses,
and auxiliary functions. Supplied in an environmentally
rated enclosure, these series of receiver/drivers are
available in both basic and full-featured models. Refer to the
chart below for specific model selection based on desired
operating voltages and features:
Model Features Input Voltage P/T Output Voltage
LTC 8560/60 Basic 120 VAC 120 VAC
LTC 8560/50 Basic 230 VAC 230 VAC
LTC 8561/60 Full 120 VAC 120 VAC
LTC 8561/50 Full 230 VAC 230 VAC
LTC 8562/60 Basic 120 VAC 24 VAC
LTC 8562/50 Basic 230 VAC 24 VAC
LTC 8563/20 Basic 24 VAC 24 VAC
LTC 8564/20 Full 24 VAC 24 VAC
LTC 8566/60 Full 120 VAC 24 VAC
LTC 8566/50 Full 230 VAC 24 VAC
Refer to the LTC 8560 Series and/or LTC 8561 Series datasheets for complete specifications.
LTC 8569, LTC 8570, LTC 8571, LTC 8572 Series Code
Merger Units
Control code merger and line driver units used to combine
Allegiant Bi-Phase control code from two (up to four with
LTC 8570 and LTC 8572 versions) systems for
communicating to AutoDome Series cameras, receiver/
drivers, switcher/followers, and Allegiant Satellite systems.
The LTC 8569, LTC 8570 Series provides 32 separate
Charcoal colored metal enclosure
445 x 318 x 89 mm (17.5 x 12.5 x 3.5 in.)
Integral mounting flanges for EIA 48 cm (19 in.) rack
www.boschsecurity.com
Loading...