Bosch LTC 0630-61 Specsheet

Video | LTC 0630 Series Dinion2X Day/Night Camera

LTC 0630 Series Dinion2X Day/Night
Camera

www.boschsecurity.com

u Advanced Image Processing Technology

u Improved XF-Dynamic engine with SmartBLC

u Detail enhancement

u True Day/Night performance with switchable filter

u 1/2-inch CCD sensor

The LTC 0630 Dinion2X Day/Night camera is a high­performance, surveillance camera. It uses a 1/2-inch
CCD sensor and incorporates advanced digital signal
processing for outstanding picture performance.
The advanced image processing enhances sensitivity;
the improved XF-Dynamic engine extends the dynamic
range. This unique combination provides a sharper,
more detailed image with outstanding accuracy in
color reproduction even under harsh lighting
conditions.
The Dinion2X camera is easy to install and ready to
use, and offers the best solution for demanding scene
conditions. The day/night feature ensures the highest
image quality possible at any time. Depending on the
available light the camera will automatically switch
from color to monochrome.
All Dinion cameras are supplied ready to operate.
Simply attach the lens, connect video and then power.
Six distinct pre-programmed operational modes are
stored in the camera. Recall the mode that suits your
application for optimized performance.
The camera automatically detects the lens type. The
lens wizard ensures accurate back-focusing for
perfectly sharp pictures at all times. For especially
challenging situations where fine tuning or special

settings are required, the camera parameters can be
individually set using the control buttons on the side
of the camera and an On-screen Display (OSD).

Functions

XF-Dynamic and Image Processing

Improved XF-Dynamic technology and highly accurate
digital signal processing optimally captures the detail
in both bright highlights and deep shadows
simultaneously. The Dinion2X maximizes the
information visible in the picture even with strong
backlighting.

SmartBLC

Turn on SmartBLC to automatically compensate the
image without the need for complicated set-up.

Detail Enhancement

Features such as Autoblack and Sharpness further
improve the details in a scene, pixel by pixel.

Day/Night Mode

The day/night mode provides enhanced night viewing
by increasing the IR sensitivity. The IR filter can switch
from color to monochrome automatically by either
sensing the illumination level or via the alarm input.
The filter can be switched manually via the alarm

2 | LTC 0630 Series Dinion2X Day/Night Camera

input, through the camera menu or via the Bilinx
coaxial control interface. An internal through-the-lens
IR detector enhances the monochrome mode stability,
as it prevents reverting to the color mode when IR
illumination is dominant. IR contrast is also measured
and used to handle reflected IR light in outdoor
scenes.

Privacy masking

Four different privacy zones allow specific parts of a
scene to be blocked. Pre-program any part of the
scene to be masked.

Default Shutter

The default shutter speed captures fast moving
objects when sufficient light is available. When light
levels fall and other adjustments have been exhausted,
the shutter speed reverts to a standard setting to
maintain sensitivity.

Bilinx Technology

Bilinx is a bidirectional communication capability
embedded in the video signal of all Bosch Dinion
cameras. Technicians can check status, change camera
settings and even update firmware from virtually
anywhere along the video cable. Bilinx reduces service
and installation time, provides for more accurate set­up and adjustment, and improves overall performance.
In addition, Bilinx uses the standard video cable to
transmit alarm and status messages, providing
superior performance without additional installation
steps.

Lens Wizard

The Lens Wizard automatically detects the lens type
and helps focus the lens at the maximum opening to
ensure proper focus is maintained throughout the 24­hour cycle. No special tools or filters are required.

Ease of installation

Several features are available that make installation
easy:

Power and alarm connections have cable connectors

•
which can be removed even when the camera is
mounted.

• A built-in test pattern generator produces signals to
test and fault-find cables.

• A multi-language On-Screen Display (OSD) increases
user compatibility.

Programmable Modes

Six independent, pre-programmed operating modes
support typical applications, but are fully
programmable for individual situations. Switching
between modes is easy via Bilinx or the external alarm
input.

High efficiency

A high efficiency power supply improves maximum
operating temperature.

Video Motion Detection

The built-in video motion detector allows you to select
a programmable area with individual thresholds. The
global scene change detector minimizes false alarms
caused by sudden lighting condition changes, such as
switching on or off the indoor or security lighting.
When motion is detected, alarms can be displayed in
the video signal, the output relay can be closed or an
alarm message can be transmitted via Bilinx.

SensUp Dynamic

By increasing the integration time up to 10 times on
the CCD, the effective sensitivity is dramatically
enhanced. This is especially useful when relying only
on moonlight for illumination.

Typical applications:

Outdoor perimeters

•
– low light
– IR light

• Traffic monitoring
– highway
– traffic intersections
– emergency response coordination

• Tunnels

• Car parks (outdoor)

• Restricted access locations such as:
– prisons
– ports / freight terminals
– military facilities
– border control and homeland security

• Casino and gambling centers.

Certifications and approvals

Electro Magnetic Compatibility

Emission EN55022 class B, FCC part 15 class B,

Immunity EN50130-4 (CE), EN50121-4 (CE)

Vibration

Safety

LTC0630/11: UL1950-1, CSA 22.2 No. 950-1, EN60950-1 (CE),
UL60950, CAN/CSA No. 60950

LTC0630/51: UL1950-1, CSA 22.2 No. 950-1, EN60950-1 (CE),
EN61000-3-2 2000 +A2:2005,
EN61000-3-3 1995 +A1:2001 +A2:2005

LTC0630/21 and LTC0630/61: UL1950-1, CSA 22.2 No. 950-1,
EN60950-1 (CE), UL60950, CAN/CSA No. 60950

Region Certification

Europe CE Declaration of Conformity

USA UL

Canada CSA

EN6100-3, EN50121-4

Camera with 500 g (1.1 lbs) lens according to
IEC60068-2-6

FCC Declaration of Conformity