Video | LTC 0620 Series DinionXF Day Night Cameras
LTC 0620 Series DinionXF Day Night
Cameras
www.boschsecurity.com
The LTC 0620 High Performance 1/2-inch Digital CCD Day/Night Camera ensures the highest image quality possible at any time. Depending on the available light the camera will automatically switch from color to monochrome.
A unique combination of 15-bit digital video processing that enhances sensitivity and XF-Dynamic which extends the dynamic range provides a sharper, more detailed image with outstanding accuracy in color reproduction.
All Dinion cameras are supplied ready to operate. Simply attach and focus the lens, then connect power. No tools are required for back focus and power connection. For especially challenging situations where fine tuning or special settings are required, the camera parameters can be individually set using the control buttons on the side of the camera and Onscreen Display (OSD). The camera automatically detects the lens type. The Lens Wizard ensures accurate back-focusing for perfectly sharp pictures at all times.
u15-bit DSP Technology
uSuperb sensitivity
uMechanically switching IR filter for IR sensitivity at night
uXF-Dynamic for unsurpassed wide dynamic range
uBilinx Communication for remote set-up and control
Functions
XF-Dynamic
The highly accurate 15-bit digital signal is automatically processed to optimally capture the detail in both the high and low light areas of the scene simultaneously, maximizing the information visible in the picture.
Bilinx Technology
Bilinx is a bidirectional communication capability embedded in the video signal of all Bosch Dinion cameras. Technicians can check status, change camera settings and even update firmware from virtually anywhere along the video cable. Bilinx reduces service and installation time, provides for more accurate setup and adjustment, and improves overall performance. In addition, Bilinx uses the standard video cable to transmit alarm and status messages, providing superior performance without additional installation steps.
Video Motion Detection
The built-in video motion detector allows you to select up to four fully programmable areas with individual thresholds. The global scene change detector minimizes false alarms caused by sudden lighting
2 | LTC 0620 Series DinionXF Day Night Cameras
condition changes, such as switching on or off the indoor or security lighting. When motion is detected alarms may be displayed in the video signal while the output relay can be closed in addition to alarm message transmission on Bilinx.
Auto Black
The automatic black level feature enhances contrast by compensating for reduced contrast (i.e. glare, fog, mist).
Default Shutter
The LTC 0620 features a fast, default shutter speed in sufficient lighting conditions to capture moving objects. When light levels fall and other adjustments have been exhausted, the shutter speed reverts to the standard setting to maintain sensitivity.
Back Light Compensation (BLC)
Offering a fully programmable BLC area of interest, and a variable BLC level, the camera can be easily set up for even the most challenging entrance applications.
Lens Wizard
The Lens Wizard automatically detects the lens type and helps focus the lens at the maximum opening to ensure proper focus is maintained throughout the 24hour cyle. No special tools or filters are required.
Programmable Modes
Three independent, preprogrammed operating modes support typical applications, but are fully programmable for individual situations. Switching between modes is easy via Bilinx or the external alarm input.
Day/Night Mode
The Day/Night Mode LTC 0620 provides enhanced night viewing by increasing the IR sensitivity. The IR filter can switch from color to monochrome automatically by either sensing the illumination level or via the alarm input. The filter can be switched manually via the alarm input, through the camera menu or via the Bilinx coaxial control interface. An internal through the lens IR detector enhances the monochrome mode stability, as it prevents reverting to the color mode when IR illumination is dominant.
SensUp
By increasing the integration time on the CCD up to 10 times, the effective sensitivity is dramatically enhanced. This is especially useful when relying only on moonlight for illumination.
Certifications and approvals
Electro Magnetic Compatibility
Emission |
EN55022 class B, FCC class B part 15 |
|
|
Immunity |
EN50130-4 Alarm Systems, Part 4 |
|
|
Safety
LTC 0620/11 and LTC 0620/51: EN60065
LTC 0620/21 and LTC 0620/61: UL6500, cUL CAN/CSA E60065-00
Region |
Certification |
|
|
|
|
Europe |
CE |
Declaration of Conformity |
USA |
FCC |
Declaration of Conformity |
|
|
|
Installation/configuration notes
Dimensions in mm (inches)
Parts included
Quantit |
Component |
y |
|
1LTC 0620 Series DinionXF Day\Night Camera
1C/CS – mount conversion ring
1Spare male 4–pin lens connector Lens not included
Technical specifications
Electrical
Model No. |
Rated Voltage |
|
|
|
|
LTC 0620/11 |
12–28 VAC |
45–65 Hz |
|
|
|
|
11–39 VDC |
|
|
|
|
LTC 0620/21 |
12–28 VAC |
45–65 Hz |
|
|
|
|
11–39 VDC |
|
|
|
|
LTC 0620/51 |
85–265 VAC |
45–65 Hz |
|
|
|
LTC 0620/61 |
85–265 VAC |
45–65 Hz |
|
|
|
Power Consumption |
4 W |
|
|
Imager |
Interline transfer CCD, 1/2-inch image |
|
format |
|
|
Vibration |
Camera with 500 g (1.1 lbs) lens according to |
|
IEC60068-2-27 |
|
|