Bosch LTC 0510-60 Specsheet

Video | LTC 0510 Series DinionXF Monochrome Cameras

LTC 0510 Series DinionXF Monochrome
Cameras

www.boschsecurity.com

u 15-bit DSP technology

u XF-Dynamic

The LTC 0510 Series of High Performance 1/2-inch
Digital CCD Monochrome Cameras create the best
possible image, even under the most difficult light and
scene conditions. Based on unique 15-bit digital video
processing technology and employing XF-Dynamic,
these cameras provide the ultimate sensitivity with
extended dynamic range. By employing the best 1/2­inch CCD available, advanced front end processing,
combined with the outstanding Dinion DSP, the
cameras achieve an astonishing sensitivity, providing
better images in low light situations and sharper
daytime images.
All Dinion cameras are supplied ready to operate.
Simply attach and focus the lens, and connect power
to provide optimal pictures under virtually all scene
conditions. No tools are required for back focus and
power connection. For extra challenging situations
where fine tuning or special settings are required, the
camera parameters can be individually set using the
control buttons on the side of the camera and On­screen Display (OSD). Also, to aid installation, the
camera automatically detects the lens type, and using
the Lens Wizard ensures accurate (back) focusing for
perfectly sharp pictures at all times.

u Bilinx communication

u Default shutter

u Lens wizard

Functions

XF-Dynamic

Extended dynamic range is brought to a new level on
the LTC 0510 Series Camera by XF-Dynamic
technology. XF-Dynamic automatically processes the
highly accurate 15-bit digital signal to optimally
capture the detail in both the highlight and lowlight
areas of the scene simultaneously, to maximize the
information visible in the picture.

Bilinx Technology

The LTC 0510 series cameras incorporate Bilinx. Bilinx
is a bidirectional communication capability embedded
in the video signal of all Bosch Dinion cameras. With
Bilinx technicians can check status, change camera
settings and even update firmware from virtually
anywhere along the video cable. Bilinx reduces service
and installation time, provides for more accurate setup
and adjustment, and improves overall performance. In
addition, Bilinx uses the standard video cable to
transmit alarm and status messages, providing
superior performance without additional installation
steps.

2 | LTC 0510 Series DinionXF Monochrome Cameras

Video Motion Detection

The built-in video motion detector allows you to select
up to four fully programmable areas with individual
thresholds. The global scene change detector
minimizes false alarms caused by sudden lighting
condition changes, such as switching on or off the
indoor or security lighting. When motion is detected
alarms may be displayed in the video signal, the output
relay can be closed in addition to alarm message
transmission on Bilinx.

Auto Black

The automatic black level feature, enhances contrast
by removing veiling glare from the picture or when
contrast is reduced by fog or mist.

Default Shutter

When viewing moving objects a fast shutter speed is
required. When using a fast shutter speed the lens
opening or gain control needs to be increased to
maintain the video signal. The camera sensitivity is
limited by the fast shutter speed. The default shutter
setting of the LTC 0510 offers the best of all worlds,
fast shutter speed as long as there is sufficient light,
however as the light level falls, when other
adjustments have been exhausted, the shutter reverts
to the standard setting maintaining the cameras
excellent sensitivity.

Back Light Compensation (BLC)

Offering a fully programmable BLC area of interest,
and a variable BLC level, the camera can be easily set
up for even the most challenging entrance
applications.

Lens Wizard

The LTC 0510 series automatically detects the type of
lens installed. The Lens Wizard will focus the lens at
the maximum lens opening, to ensure that focus is
maintained throughout the entire 24-hour day/night
cycle. No special tools or filters are required.

Programmable Modes

The camera supports 3 independent operating modes.
The 3 modes are preprogrammed for typical
applications, but are fully programmable for individual
situations. Switching between modes is easy via Bilinx
or the external alarm input.

SensUp

By increasing the integration time on the CCD up to 10
times, the effective sensitivity is dramatically
enhanced, especially useful where there is no artificial
lighting and you rely on the moon, stars and scattered
radiation.

Vibration Camera with 500 gr (1.1 lbs) lens according to

Safety

EN60065 (/10 and /50 models)

UL6500, cUL CAN/CSA E60065-00 (/20 and /60 models)

Region Certification

Europe CE EC-Declaration of Conformity

IEC60068-2-27

Installation/configuration notes

Dimensions in mm

Parts included

QuantityComponent

1 LTC 0510 Series DinionXF Monochrome Camera

1 Spare male 4–pin lens connector

Lens not included

Technical specifications

Electrical

Model No. Voltage Range System

LTC 0510/10 12 – 28 VAC

11 – 39 VDC

LTC 0510/20 12 – 28 VAC

11 – 39 VDC

LTC 0510/50 85 – 265 VAC 45 – 65 Hz CCIR

LTC 0510/60 85 – 265 VAC 45 – 65 Hz EIA

45 – 65 Hz CCIR

45 – 65 Hz EIA

Certifications and approvals

Electromagnetic Compatibility

Emission EN55022 class B, FCC class B part 15

Immunity EN50130-4 Alarm Systems, Part 4

Power Consumption 4 W

Imager Interline transfer CCD, 1/2-inch image

format