Bosch LTC 0495/11 Quick Start Manual

CCTV | LTC 0495 Series DinionXF Day/Night Cameras

LTC 0495
Series Dinion

Day Night

Cameras

The LTC 0495 High Performance 1/3-inch Digital CCD
Day/Night Camera ensures the highest image quality possible
at any time. Depending on the available light the camera will
automatically switch from color to monochrome.

A unique combination of 15-bit digital video processing that
enhances sensitivity and XF-Dynamic which extends the
dynamic range provides a sharper, more detailed image with
outstanding accuracy in color reproduction.

All Dinion cameras are supplied ready to operate. Simply
attach and focus the lens, then connect power. No tools are
required for back focus and power connection. For especially
challenging situations where fine tuning or special settings are
required, the camera parameters can be individually set using
the control buttons on the side of the camera and On-screen
Display (OSD). The camera automatically detects the lens
type. The Lens Wizard ensures accurate back-focusing for
perfectly sharp pictures at all times.

XF

• 15-bit DSP Technology

• High sensitivity

• Mechanically switching IR filter for
IR sensitivity at night

• XF-Dynamic for unsurpassed
wide dynamic range

• Bilinx Communication for remote
set-up and control

• Default Shutter eliminates motion
blurring

• Four area video motion detection

• 540 TVL resolution

Functions

XF-Dynamic

The highly accurate 15-bit digital signal is automatically
processed to optimally capture the detail in both the high and
low light areas of the scene simultaneously, maximizing the
information visible in the picture.

Bilinx Technology

Bilinx is a bi-directional communication capability embedded
in the video signal of all Bosch Dinion cameras. Technicians
can check status, change camera settings and even update
firmware from virtually anywhere along the video cable. Bilinx
reduces service and installation time, provides for more
accurate set-up and adjustment, and improves overall
performance. In addition, Bilinx uses the standard video cable
to transmit alarm and status messages, providing superior
performance without additional installation steps.

Security you can rely on.

2 | LTC 0495 Series DinionXF Day/Night Cameras

Video Motion Detection

The built-in video motion detector allows you to select up to
four fully programmable areas with individual thresholds. The
global scene change detector minimizes false alarms caused by
sudden lighting condition changes, such as switching on or off
the indoor or security lighting. When motion is detected
alarms may be displayed in the video signal while the output
relay can be closed in addition to alarm message transmission
on Bilinx.

Auto Black

The automatic black level feature enhances contrast by
compensating for reduced contrast (i.e. glare, fog, mist).

Default Shutter

The LTC 0495 features a fast, default shutter speed in sufficient
lighting conditions to capture moving objects. When light
levels fall and other adjustments have been exhausted, the
shutter speed reverts to the standard setting to maintain
sensitivity.

Back Light Compensation (BLC)

Offering a fully programmable BLC area of interest, and a
variable BLC level, the camera can be easily set up for even the
most challenging entrance applications.

SensUp

By increasing the integration time on the CCD up to 10 times,
the effective sensitivity is dramatically enhanced.
This is especially useful when relying only on moonlight for
illumination.

Parts Included

Quantity Component

1

1 C/CS – mount conversion ring

1 Spare male 4 – pin lens connector

Certifications and Approvals

Electro Magnetic Compatibility

Emission EN55022 class B, FCC class B part 15

Immunity EN50130-4 Alarm Systems, Part 4

Vibration Camera with 500 g (1.1 lbs) lens according

Safety

LTC 0495/11 and LTC 0495/51: EN60065

LTC 0495/21 and LTC 0495/61: UL6500, cUL CAN/CSA E60065­00

Installation/Configuration Notes

LTC 049 5 S e r ie s D in i onXF Day\Night Camera

Lens not included

to IEC60068-2-27

Lens Wizard

The Lens Wizard automatically detects the lens type and helps
focus the lens at the maximum opening to ensure proper focus
is maintained throughout the 24-hour cycle. No special tools
or filters are required.

Programmable Modes

Three independent, preprogrammed operating modes
support typical applications, but are fully programmable for
individual situations. Switching between modes is easy via
Bilinx or the external alarm input.

Day/Night Mode

The Day/Night Mode LTC 0495 provides enhanced night
viewing by increasing the IR sensitivity. The IR filter can
switch from color to monochrome automatically by either
sensing the illumination level or via the alarm input. The filter
can be switched manually via the alarm input, through the
camera menu or via the Bilinx coaxial control interface. An
internal through the lens IR detector enhances the
monochrome mode stability, as it prevents reverting to the
color mode when IR illumination is dominant.

117 (4.606")

85 (3.346)

33 (1.30)

1/4"-20 UNC

XF

Dinion

LENS 4-PIN

48 (1.889")

Day/Night Camera

1/4"-20 UNC

122 (4.803")

59 (2.323")

Dimensions in mm (inches)

67 (2.638")

XF

Dinion

Day/Night Camera

Dimensions in mm (inches).

133 (5.236")

XF

Dinion

Day/Night Camera