Bosch LTC 0485-21 Specsheet

Page 1
Video | LTC 0485 Series DinionXF Color Cameras
LTC 0485 Series DinionXF Color Cameras
www.boschsecurity.com
u 15-bit DSP technology
u XF-dynamic
u Bilinx communication
The LTC 0485 Series of High Performance 1/3-inch Digital CCD Color Cameras create the best possible image, even under the most difficult light and scene conditions. Based on unique 15-bit digital video processing technology and employing XF-Dynamic, these cameras provide excellent sensitivity with extended dynamic range. By employing the best 1/3– inch CCD available, advanced front end processing, combined with the outstanding Dinion DSP, the cameras achieve an astonishing sensitivity, providing better color images in low light situations and sharper daytime images. Intelligent White balance algorithms, supported by a White Balance Hold function and even full manual white balance, ensure the most accurate color reproduction possible. All Dinion cameras are supplied ready to operate. Simply attach and focus the lens, and connect power to provide optimal pictures under virtually all scene conditions. No tools are required for back focus and power connection. For extra challenging situations where fine tuning or special settings are required, the camera parameters can be individually set using the control buttons on the side of the camera and On-screen Display (OSD). Also, to aid installation, the camera automatically detects the lens type, and using the Lens Wizard ensures accurate (back) focusing for perfectly sharp pictures at all times.
u Default shutter
Functions
XF-Dynamic
Extended dynamic range is brought to a new level on the LTC 0485 Series Camera by XF-Dynamic technology. XF-Dynamic automatically processes the highly accurate 15-bit digital signal to optimally capture the detail in both the highlight and lowlight areas of the scene simultaneously, to maximize the information visible in the picture.
Bilinx Technology
The LTC 0485 series cameras incorporate Bilinx. Bilinx is a bidirectional communication capability embedded in the video signal of all Bosch Dinion cameras. With Bilinx technicians can check status, change camera settings and even update firmware from virtually anywhere along the video cable. Bilinx reduces service and installation time, provides for more accurate set­up and adjustment, and improves overall performance. In addition, Bilinx uses the standard video cable to transmit alarm and status messages, providing superior performance without additional installation steps.
Video Motion Detection
The built-in video motion detector allows you to select up to four fully programmable areas with individual thresholds. The global scene change detector
Page 2
2 | LTC 0485 Series DinionXF Color Cameras
minimizes false alarms caused by sudden lighting condition changes, such as switching on or off the indoor or security lighting. When motion is detected alarms may be displayed in the video signal, the output relay can be closed in addition to alarm message transmission on Bilinx.
Auto Black
The automatic black level feature, enhances contrast by removing veiling glare from the picture or when contrast is reduced by fog or mist.
Default Shutter
When viewing moving objects a fast shutter speed is required. When using a fast shutter speed the lens opening or gain control needs to be increased to maintain the video signal. The camera sensitivity is limited by the fast shutter speed. The default shutter setting of the LTC 0485 offers the best of all worlds, fast shutter speed as long as there is sufficient light, however as the light level falls, when other adjustments have been exhausted, the shutter reverts to the standard setting maintaining the cameras excellent sensitivity.
Back Light Compensation (BLC)
Offering a fully programmable BLC area of interest, and a variable BLC level, the camera can be easily set up for even the most challenging entrance applications.
Lens Wizard
The LTC 0485 Series automatically detects the type of lens installed. The Lens Wizard will focus the lens at the maximum lens opening, to ensure that focus is maintained throughout the entire 24–hour day/night cycle. No special tools or filters are required.
Programmable Modes
The camera supports 3 independent operating modes. The 3 modes are preprogrammed for typical applications, but are fully programmable for individual situations. Switching between modes is easy via Bilinx or the external alarm input.
NightSense
The LTC 0485 cameras feature NightSense. With NightSense the sensitivity is increased by 9 dB in monochrome mode. NighSense can be automatically activated in low light situations, or remotely using Bilinx.
SensUp
By increasing the integration time on the CCD up to 10 times, the effective sensitivity is dramatically enhanced, especially useful where there is no artificial lighting and you rely on the moon, stars and scattered radiation.
Certifications and approvals
Electro Magnetic Compatibility
Emission EN55022 class B, FCC class B part 15
Immunity EN50130-4 Alarm Systems, Part 4
Vibration Camera with .5 kg (1.1 lbs) lens according to
Safety
LTC 0485/11 and LTC 0485/51: EN60065
LTC 0485/21 and LTC 0485/61: UL6500, cUL CAN/CSA E60065-00
Region Certification
Europe CE Declaration of Conformity
USA FCC Declaration of Conformity
IEC60068-2-27
Installation/configuration notes
Dimensions in mm (inches)
Parts included
Quantity Components
1 LTC 0485 Series DinionXF Color Camera
1 Spare male 4–pin lens connector
Lens not included
Technical specifications
Electrical
Model No. Voltage Range
LTC 0485/11 12–28 VAC 45–65 Hz
11–36 VDC
LTC 0485/21 12–28 VAC 45–65 Hz
11–36 VDC
LTC 0485/51 85–265 VAC 45–65 Hz
LTC 0485/61 85–265 VAC 45–65 Hz
Power Consumption
Imager Interline transfer CCD, 1/3-inch format
4 W
Page 3
3 | LTC 0485 Series DinionXF Color Cameras
Active Pixels
PAL 752 H x 582 V
NTSC 768 H x 492 V
Sensitivity (3200 k)
Sensitivity (Full
1)
Video)
Sensitivity
1)
50 IRE
Minimum Illumination
1)
Minimum Illumination with
2.4 lux (0.24 fc)
0.59 lux / 0.24 lux (NightSense) (0.059 fc / 0.024 fc (NightSense))
0.24 lux / 0.10 lux (NightSense) (0.024 fc / 0.01 fc (NightSense))
0.024 lux / 0.010 lux (NightSense) (0.0024 fc / 0.0010 fc (NightSense))
Sens Up
Horizontal
540 TVL
Resolution
Signal-to-Noise-
> 50 dB
Ratio
Video Output 1 Vpp, 75 Ohm
Y/C Output Y: 1 Vpp / C: 0.3 Vpp
Synchronization Internal, line lock, HV-lock and genlock (Burst
lock) selectable
Electronic Shutter Auto (1/60 (1/50) to 1/500000), fixed,
flickerless, default
Sensitivity up Off, automatic continuous up to 10x
Auto Black On, off selectable
Range 32x dynamic range enhancement
Dynamic Noise
Auto, off selectable
Reduction
Contour Sharpness enhancement level selectable
BLC Off, area and level selectable
Gain Auto (maximum level selectable to 28 dB) or
fixed level selectable
White Balance ATW (2500–10000 K), AWB hold, manual WB
selectable
VMD 4 area, sensitivity selectable
Alarm Output VMD or Bilinx
Alarm Input (TTL) Profile switching, +5 V nominal, +40 VDC max.
Alarm Output Relay
External
Max. 30 VAC or +40 VDC, max. 0.5 A continuous, 10 VA
75 Ohm or High Impedance selectable
SynchronalInput
Cable Compensation
Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with coaxial communication)
Camera ID 16 character editable string, position selectable
Lens Types Manual, DC- and Video-iris auto-detect with
override DC-iris drive: max. 50 mA continuous Video-iris: 11.5 ± 0.5 VDC, max. 50 mA continuous
Remote Control Bi-directional coaxial communication
1) F1.2, 89% reflection, SensUp Off
Mechanical
Dimensions (H x W x L)
59 x 67 x 122 mm (2.28 x 2.6 x 4.8 in.) without lens
Weight 450 g (0.99 lbs) without lens
Tripod Mount Bottom (isolated) and top 1/4-in. 20 UNC
Lens Mount Cand CS
Controls OSD with softkey operation
Environmental
Operating Temperature -20 °C to +50 °C(-4 °F to +122 °F)
Storage Temperature -25 °C to +70 °C(-13 °F to +158 °F)
Operating Humidity 20% to 93% Relative humidity
Storage Humidity Up to 98% Relative humidity
Ordering information
LTC 0485/11 DinionXF Color Camera
1/3-inch, high performance, 540 TVL, PAL, DSP, 12 – 28 VAC/11 – 36 VDC, 50 Hz
Order number LTC0485/11
LTC 0485/21 DinionXF Color Camera
1/3-inch, high performance, 540 TVL, NTSC, DSP, 12 – 28 VAC/11 – 36VDC, 60 Hz
Order number LTC0485/21
LTC 0485/51 DinionXF Color Camera
1/3-inch, high performance, 540 TVL, PAL, DSP, 85 – 268 VAC, 50 Hz
Order number LTC0485/51
LTC 0485/61 DinionXFColor Camera
1/3-inch, high performance, 540 TVL, NTSC, DSP, 85 – 265 VAC, 60 Hz
Order number LTC0485/61
Accessories
LTC 3364/21 Varifocal Lens IR corrected
1/3-inch, 2.8 – 6 mm, DC-iris, CS-mount F1.4-200, 4­pin
Order number LTC3364/21
LTC 3364/31 Varifocal Lens
1/3-inch, 3.5 – 8 mm, DC-iris, CS-mount F/1.4-200, 4­pin
Order number LTC3364/31
Page 4
4 | LTC 0485 Series DinionXF Color Cameras
Represented by:
Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:
Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180 security.sales@us.bosch.com www.boschsecurity.us
Bosch Security Systems B.V. P.O. Box 80002 5617 BA Eindhoven, The Netherlands Phone: + 31 40 2577 284 Fax: +31 40 2577 330 emea.securitysystems@bosch.com www.boschsecurity.com
Robert Bosch (SEA) Pte Ltd, Security Systems 11 Bishan Street 21 Singapore 573943 Phone: +65 6571 2808 Fax: +65 6571 2699 apr.securitysystems@bosch.com www.boschsecurity.asia
Bosch (Shanghai) Security Systems Ltd. 201 Building, No. 333 Fuquan Road North IBP Changning District, Shanghai 200335 China Phone +86 21 22181111 Fax: +86 21 22182398 www.boschsecurity.com.cn
Robert Bosch Ltda Security Systems Division Via Anhanguera, Km 98 CEP 13065-900 Campinas, Sao Paulo, Brazil Phone: +55 19 2103 2860 Fax: +55 19 2103 2862 latam.boschsecurity@bosch.com www.boschsecurity.com
© Bosch Security Systems 2013 | Data subject to change without notice 2005868939 | en, V4, 04. Oct 2013
LTC 3384/21 Zoom Lens
1/3-inch, 6 – 60 mm, DC-iris, CS-mount F1.4-360, 4-pin
Order number LTC3384/21
TC120PS Power Supply Unit
Order number TC120PS
TC220PS Power Supply Unit
Order number TC220PS
TC220PSX‑24 Power Supply Unit
Order number TC220PSX-24
TC1334 Power Supply Unit
Order number TC1334
Software Options
VP‑CFGSFT Configuration Software
for cameras using Bilinx, includes VP-USB Adaptor
Order number VP-CFGSFT
Loading...