Bosch LTC 0465, LTC 0465/11, LTC 0465/51 Specfications

CCTV | LTC 0465 Series Dinion Day/Night Cameras

The Dinion Day/Night Camera is a professional
surveillance day/night camera that incorporates 10-bit
digital signal processing. The camera is easy to install and
ready to use, offering good quality picture performance.

All Dinion cameras are delivered ready to operate. Simply
attach and focus the lens, then connect power. The
camera automatically detects the lens type. The Lens
Wizard ensures accurate back focusing for sharp pictures
at all times. The camera parameters can be individually set
using the control buttons on the side of the camera and
On-screen Display (OSD).

Functions

Day/Night Mode

The LTC 0465 has enhanced night or low-light viewing
compared to normal color cameras. The IR filter can
switch from color to monochrome automatically to
improve scenes when light levels have been reduced or to
make use of infrared light. An internal through-the-lens IR
detector enhances the monochrome mode stability as it
prevents reverting to the color mode when IR illumination
is dominant.

Auto Black

The automatic black level feature enhances contrast by
compensating for reduced contrast (i.e. glare, fog, mist).

Bilinx Technology

Bilinx is a bi-directional communication capability
embedded in the video signal of all Bosch Dinion cameras.
Technicians can check status, change camera settings,
and even update firmware from virtually anywhere along
the video cable. Bilinx reduces service and installation
time, provides for more accurate set-up and adjustment,
and improves overall performance. In addition, Bilinx uses
the standard video cable to transmit alarm and status
messages, providing superior performance without
additional installation steps.

Lens Wizard

The Lens Wizard automatically detects the lens type and
helps focus the lens at the maximum opening, thus
ensuring proper focus maintenance throughout the 24­hour cycle. No special tools or filters are required.

Typical Applications

•

Museums and art galleries

•

Shopping centers

•

Offices

•

Schools, colleges, and universities

•

Petrol/gas stations

LTC 0465 Series Dinion Day/Night
Cameras

▶

1/3 inch format CCD sensor

▶

540 TVL resolution

▶

Mechanically switching IR filter for IR sensitivity at
night

▶

Bilinx Communication for remote set-up and control

▶

Auto-detection of lens type with LensWizard

www.boschsecurity.com

2 | LTC 0465 Series Dinion Day/Night Cameras

Certifications and Approvals

Region Certification

Europe CE

USA FCC + UL

Electro Magnetic Compatibility

Emission EN55022 class B, FCC class B part 15

Immunity EN50130-4 Alarm Systems, Part 4

Vibration Camera with 500 gr (1.1 lbs) lens according

to IEC60068-2-27

Safety

LTC 0465/11 and LTC 0465/51: EN60065

LTC 0465/21 and LTC 0465/61: UL6500, cUL CAN/CSA E60065-00

Installation/Configuration Notes

Parts Included

Quantity Component

1 LTC 0465 Series Dinion Day\Night Camera

1 Spare male 4 – pin lens connector (lens not included)

1 Installation and Operation manual (multi-lingual)

Technical Specifications

Electrical

Model No. Rated Voltage

LTC 0465/11 12 – 28 VAC 45 - 65 Hz

11 – 36 VDC

LTC 0465/21 12 – 28 VAC 45 - 65 Hz

11 – 36 VDC

Model No. Rated Voltage

LTC 0465/51 110 – 230 VAC 45 - 65 Hz

LTC 0465/61 110 – 230 VAC 45 - 65 Hz

Power Consumption 4 W

CCD Type 1/3-inch interline

Active Pixels

PAL Model: 752 x 582

NTSC Model 768 x 494

Sensitivity (3200 K, scene reflectivity 89%, F1.2)

Full video
(100 IRE)

Usable picture
(50 IRE)

Usable picture
(30 IRE)

Color 2.6 lx

(0.26 fc)

0.65 lx
(0.065 fc)

0.30 lx
(0.03 fc)

Mono 1.04 lx

(0.104 fc)

0.26 lx
(0.026 fc)

0.012 lx
(0.0012 fc)

Horizontal Resolution 540 TVL

Day/Night Color, Mono, Auto

Dynamic range 60 db (10-bit image processing)

Signal-to-Noise Ratio > 50 dB

BLC On (center window weighted), Off

Gain 20 dB max.

White Balance ATW (2500 - 10000 K), AWB hold, Manual

WB selectable

Shutter Auto (1/60 (1/50) to 1/150000), fixed,

flickerless

Auto Black Automatic, Continuous, Off

Synchronization Internal, Line Lock selectable

Lens Mount CS (maximum lens protrusion 5 mm, 0.2 in),

C-mount compatible with adapter ring

Lens Types Manual, DC iris and Video iris auto-detect

with override
DC-iris drive: max. 50 mA continuous
Video-iris: 11.5 ± 0.5 VDC, max 50 mA con­tinuous

Remote Control Bilinx coaxial communication

Camera ID 16 character editable string, position selecta-

ble

Alarm Input (TTL) +5 V nominal, +40 VDC max

Alarm Output Bilinx or monochrome

Alarm Output Relay Max. 30 VAC or +40 VDC, Max 0,5 A continu-

ous, 10 VA

Video Output 1 Vpp, 75 Ohm

Mechanical

Dimensions (H x W x L) 58 x 66 x122 mm (2.28 x 2.6 x 4.8 in) with-

out lens

Weight 450 g (0.99 lbs) without lens

Color RAL 7035 Light Grey

Tripod Mount Bottom (isolated) and top 1/4-inch 20 UNC