Bosch FPE-1000-SLC Specsheet

Fire Alarm Systems | FPE‑1000‑SLC Signaling Line Circuit Plug‑in Module

FPE‑1000‑SLC Signaling Line Circuit
Plug‑in Module

www.boschsecurity.com

u Signaling Line Circuit (SLC) is power-limited and

supervised

The FPE‑1000‑SLC Signaling Line Circuit Plug‑in
Module provides a Signaling Line Circuit (SLC) for
connection of analog devices to the FPA‑1000 Analog
Addressable Fire Panels. It is mandatory equipment
which installs at the top position on the main board in
the fire panel. A second FPE-1000-SLC Plug-in Module
can be installed as an option in the position below the
first SLC board. The bottom position can be equipped
with an optional FPE‑1000‑CITY City Tie Plug‑in
Module. The plug‑in modules connect directly to the
main board.
Signaling Line Circuits can be wired as Class A Style 6
or 7 or Class B Style 4 circuits. Class A configuration is
recommended because this allows the system to poll
the circuit in both directions, ensuring circuit
operation in the event of a single break in the wiring.
Each SLC is power‑limited and supervised.

u Configurable as one Class A Style 6 or 7 or two

Class B Style 4 circuits

u Up to 254 detectors and modules, or 127 analog

sounder bases in combination with suitable
detectors

Functions

Sounder base addressing

For addressing a detector/ sounder base combination,
addresses 1 through 127 are available for the detector
and 128 through 254 for the sounder base. The
sounder base will automatically be addressed based
on the detector’s address (detector’s address + 127)

Certifications and approvals

Region Certification

USA UL FSZI: Emergency Alarm System Control

CSFM see our website

FDNY­CoA

Units (ANSI/UL 2017) and UOJZ: Con­trol Units, System (ANSI/UL 864)

#6101

2 | FPE‑1000‑SLC Signaling Line Circuit Plug‑in Module

Represented by:

Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:

Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.us

Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[e-mail]
www.boschsecurity.com

Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.asia

Bosch (Shanghai) Security Systems Ltd.
201 Building, No. 333 Fuquan Road
North IBP
Changning District, Shanghai
200335 China
Phone [phone]
Fax: [phone]
www.boschsecurity.com.cn

Robert Bosch Ltda Security Systems Division
Via Anhanguera, Km 98
CEP 13065-900
Campinas, Sao Paulo, Brazil
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.com

© Bosch Security Systems 2014 | Data subject to change without notice
2690605707 | en, V6, 24. Jul 2014

Installation/configuration notes

Wiring Considerations

Use plain wire. Twisted pair or shielded wire can be
used in harsh environments, but overall wire length
must be reduced. Observe maximum circuit resistance
of 50 Ω.

Parts included

Quant. Component

1 FPE‑1000‑SLC module

1 Literature – Installation Guide

Technical specifications

Electrical

Line Voltage: Nominal: 39 VDC

Range: 29 VDC to 40 VDC)

Line Current: 204 mA (per FPE-1000-SLC):

Circuit Resistance: < 50 Ω

Circuit Capacitance: < 1 μF

Circuit Inductance: < 1 mH

Configuration (per
FPE-1000-SLC):

One or two Class B Style 4, or one
Class A Style 6 or 7

Wire Gauge: 12 AWG to 18 AWG (ISO 4 mm2 to

0.75 mm2)

Environmental

Environment Friendly: RoHS compliant

Relative Humidity: Up to 95%, non-condensing

Temperature (operating): +32°F to +120°F (0°C to +49°C)

Temperature (storage): -4°F to +140°F (-20°C to +60°C)

Ordering information

FPE‑1000‑SLC Signaling Line Circuit Plug‑in Module

Provides a Signaling Line Circuit (SLC) for connection
of analog devices to the FPA‑1000 Analog Addressable
Fire Panels

Order number FPE-1000-SLC