Communications Systems | LB1‑UM06E‑1 Metal Cabinet Loudspeaker
LB1‑UM06E‑1 Metal Cabinet Loudspeaker
Suitable for speech and music reproduction
▶
Robust metal enclosure
▶
Surface and/or recessed mounting
▶
Provision for internal mounting of the optional line/
▶
loudspeaker supervision boards
Recommended for voice evacuation systems
▶
Compliant with international installation and safety
▶
regulations
BS 5839‑8 and EN 60849 compliant
▶
The LB1‑UM06E‑1 circular metal cabinet emergency
loudspeaker delivers professional performance from a
robust, yet aesthetically designed metal enclosure. It is an
ideal loudspeaker for indoor use in offices, schools, car
parks, shopping centers, and in areas where vandalism is
a potential hazard.
Functions
Voice alarm
Voice alarm loudspeakers are specifically designed for use
in buildings, where the performance of PA systems is
subject to official regulations. The LB1‑UM06E‑1 is
designed for voice alarm systems, and is compliant with
British Standard BS 5839‑8 and EN 60849.
Protection
The loudspeaker has built‑in protection to ensure that in
the event of a fire damage does not cause failure of the
connected circuit. In this way, system integrity is
maintained; ensuring loudspeakers in other areas can still
be used to inform people of the situation.
Connections and safety
The loudspeaker has a ceramic terminal block, thermal
fuse, and heat-resistant, high-temperature wiring. The
cabinet has a provision for internally mounting the
optional line/loudspeaker supervision board.
Certifications and Approvals
All Bosch loudspeakers are designed to withstand
operating at their rated power for 100 hours in
accordance with IEC 268‑5 Power Handling Capacity
(PHC) standards. Bosch has also developed the Simulated
Acoustical Feedback Exposure (SAFE) test to demonstrate
that the speakers can withstand two times their rated
power for short durations. This ensures extra reliability
under extreme conditions, leading to greater customer
satisfaction, longer operating life, and much less chance
of failure or performance deterioration.
Safety according to EN 60065
Emergency according to BS 5839‑8
according to EN 60849
Water and dust protection according to EN60529 IP32
Installation/Configuration Notes
The cabinet is designed for both surface and recessed
mounting on walls. The back box provides a selection of
mounting holes, even for mounting on U40 and MK
installation boxes. The back box has two knockout holes
on the topside for two cable glands (not included) for
loop-through connection. For extra installation
www.boschsecurity.com
2 | LB1‑UM06E‑1 Metal Cabinet Loudspeaker
61.5 mm (2.4")
105 mm (4.1")
170 mm (6.7")
199 mm (7.8")
196 mm (7.7")
60 mm (2.3")
6 mm (0.23")
10 mm (0.3")
4 mm (0.15")
115 mm (4.5")
60 mm (2.3")
36 mm (1.4")
7 mm (0.27")
4.8 mm (0.2")
20 mm (0.7")
20 mm (0.7")
20 mm (0.7")
4
C
6W
3W
1.5W
0.75W
-
70V
C
-
6W
3W
1.5W
0.75W
100V
60
70
80
90
100
110
10 100 1000 10000 100000
dB SPL
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
1000 2000 4000 8000
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
125 250 500 1000
convenience, a safety cord from the back box lets the
installer temporarily hang the front grille unit during
installation.
The cabinet has a three-way terminal block with screw
connections suitable for loop-through wiring (including
earth).
Four primary taps on the matching transformer allow
selection of nominal full-power, half-power, quarter-power
or eighth power radiation (in 3 dB steps).
Circuit diagram
Frequency response
Dimensions in mm (in)
Rear / Installation dimensions in mm (in)
Surface mounted (left) and recessed mounted (right)
Polar diagrams (measured with pink noise)
Octave band sensitivity *
Octave SPL
1W/m
Total octave SPL
1W/m
Total octave SPL
Pmax/m
125 Hz 73.3 - -
250 Hz 90.4 - -
500 Hz 89.0 - -
1000 Hz 86.0 - -
2000 Hz 92.4
4000 Hz 96.6 - -
8000 Hz 89.9 - -