Bosch EVX-RSI Installation Manual

P/N1-5029 REV. A

EVAX 25/50 + EVX-RSI

Messagesareprioritizedautomatically if more thanoneisactivatedsimultaneously.

Only the highest priority messagewillplayuntil that selection iscleared.

The following are thepriorities, with onebeinghighest:

TB1

1 2 3 4 5 6 7 8

			TB2	11
		J1		10
				9
	TB3			8
1				7
2			J2	6
3				5
4				4
5	YEL	FAULT	1 2 3	3
6	GRN	NORMAL		2
7				1
8	RED	ALARM
MESSAGE		MIC		P2
GAIN		GAIN

Method #1 - SN2-5= OFF (UP) (Primary EvaconBellOnly RSIprovidesaux.messageonly)

1.	Fire message / toneactivated by EVAX 25 terminals TB1-3 & 4	(Signal Circuit)
2. Aux. message / tone activated by EVAX 25 terminals TB2-7 & 9		(Contact)
3.	Message no.1activatedbyEVX-RSIterminals9&1	(Contact)
4.	Message no.2activatedbyEVX-RSIterminals9&2	(Contact)
5.	Message no.3activatedbyEVX-RSIterminals9&3	(Contact)

.

10. Message no.8activatedbyEVX-RSIterminals9&8 (Contact)

Method #2 - SN2-5= ON(DOWN) (RSIprovidesalternateEvacmessages,nocontactplaysprimary)

1.Message no.1activatedbyEVX-RSIterminals9&1(Contact) AND EVAX 25 terminalsTB1-3 & 4 (Signal Circuit)

2.Message no.2activatedbyEVX-RSIterminals9&2(Contact) AND EVAX 25 terminalsTB1-3 & 4 (Signal Circuit)

3.Message no.3activatedbyEVX-RSIterminals9&3(Contact) AND EVAX 25 terminalsTB1-3 & 4 (Signal Circuit)

.

8.Message no.8activatedbyEVX-RSIterminals9&8(Contact) AND EVAX 25 terminalsTB1-3 & 4 (Signal Circuit)

	U6	EVX-RSI	11
			10
			9
		Active	8
		LED
				SW8
			7
			6
SN2	SN1		5
S1			4
			3
	FactoryPre-WiredCable		2
	(Dotsdesignatepolarity markers)		1
				SW1

Customerprovided

NormallyOpen

Contact Closures

Closing contactwill cause associated Message / Tone to sound.

As long ascontact i s maintained,Message/Tone willsound.

33 Chestnut St. New Haven, CT 06511

[phone] FAX [phone]