Fire Alarm Systems | ET70 High performance Speakers
ET70 High performance Speakers
www.boschsecurity.com
u 25 VRMS or 70 VRMS operation at a choice of seven taps from 0.125 W to 8 W
u Cost effective two wire design
u Low average current draw
u Extra protection and improved audibility through sealed back speaker construction
u Easy wiring with screw terminals
The ET70 Series Speakers provide high audio output with clear audibility, and are designed to meet the critical needs of the life safety industry for effective emergency voice communications and tone signaling. The high efficiency speakers are designed for maximum output at a minimum wattage across a frequency range of 400 Hz to 4 kHz.
A speaker mounting plate with a built in level adjustment allows for a faster and easier installation. The two screw grill cover creates an attractive appearance.
Certifications and approvals
Cooper Wheelock, Inc. holds these Listings and Approvals:
Region |
Certification |
|
|
|
|
USA |
UL |
UEAY: Speakers (UL464) |
|
CSFM |
see our website |
|
|
|
Installation/configuration notes
Compatible Products
The following products are compatible with these ET70 Speakers:
Category |
Product ID |
Product Description |
Control |
D70221 |
Conventional FACP |
Panels |
|
|
|
D70242 |
Addressable FACP |
|
D7024 |
Conventional FACP |
|
D8024 |
Analog FACP |
|
D9124 |
Addressable FACP |
|
D10024A |
Analog FACP |
|
FPD-70242 |
Addressable FACP |
|
FPD-7024 |
Conventional FACP |
These speakers are compatible with Wheelock SAFEPATH4 Facility Communication Systems and Bosch Voice Evacuation Systems.
1 When used, the D7022 must be set for 24 VDC operation.
2 When used with a D7039 Multiplex Expansion Module, the D7024 and FPD-7024 become addressable fire alarm control panels (FACPs).
Mounting
The low profile design of these notification appliances creates more wiring space in standard electrical back boxes. The speaker mounting plate incorporates a
2 | ET70 High performance Speakers
built in level adjustment feature allowing for a faster and easier installation. These speakers mount on the indicated back boxes for the indicated applications:
|
Conduit |
Surface |
Flush Mounted |
|
Applications |
Mounted |
|
Four inch square* |
|
|
• |
SBB Back Box |
• |
• |
|
*Requires an SER extension ring. Use as Combination Appliance
Where combination appliances are required, these speakers can be used with the RSSP 241575W FR (15/75 cd), RSSP 24MCW FR (15 cd, 30 cd, 75 cd, or 110 cd), or RSSP 24MCWH FR (135 cd or 185 cd) Retrofit Strobe Plates that are designed to meet or exceed the latest requirements of NFPA 72,
ANSI 117.0 and UL 1971. The speakers and retrofit strobe plates are also compatible with the SBL2 R Retrofit Device Back Box.
Wiring
The input terminals accept wires with diameters between 18 AWG and 12 AWG (ISO 0.75 mm2 and 4 mm2).
Parts included
Quant. Component
1Speaker
1Mounting Plate
1Hardware pack
1Literature pack
Technical specifications
Electrical
Power Requirements
Voltage (input): |
|
24 VDC nominal; |
||
|
|
16 VDC or FWR to 33 VDC or FWR |
||
|
|
|
|
|
Environmental |
|
|
|
|
|
|
|
|
|
Relative Humidity: |
|
|
Up to 85%, non condensing |
|
|
|
|
||
Temperature (Operating): |
|
+32°F to +120°F (0° to +49°C) |
||
|
|
|
|
|
Mechanical |
|
|
|
|
|
|
|
||
Dimensions (H x W x D): |
|
5.1 in. x 5.1 in. x 2.9 in. |
||
|
|
|
(13.0 cm x 13.0 cm x 7.4 cm) |
|
|
|
|
||
Material: |
|
Molded plastic |
||
|
|
|
|
|
Speaker Volume at 10 ft (3 m)
0.125 (1/8) W: |
75 dBA |
|
|
0.25 (1/4) W: |
78 dBA |
|
|
0.5 (1/2) W: |
81 dBA |
|
|
1 W: |
84 dBA |
|
|
2 W: |
87 dBA |
|
|
4 W: |
90 dBA |
|
|
8 W: |
93 dBA |
|
|
Ordering information
ET70 N High Performance Speaker (nickel)
Nickel finish, 24 VDC device with high audio output with clear audibility and field selectable taps from 1/8 W to 8 W
Order number ET70-N
ET70 R High Performance Speaker (red)
Red, 24 VDC device with high audio output with clear audibility and field selectable taps from 1/8 W to 8 W
Order number ET70-R
ET70 W High Performance Speaker (white)
White, 24 VDC device with high audio output with clear audibility and field selectable taps from 1/8 W to 8 W
Order number ET70-W
Accessories
ISP2 R Surface Adapter (red)
13.3 cm (5.25 in.) square, 3 cm (1.1875 in.) deep
Order number ISP2-R
ISP2 W Surface Adapter (white)
13.3 cm (5.25 in.) square, 3 cm (1.1875 in.) deep
Order number ISP2-W
RP R Retrofit Plate (red)
20.3 cm (8 in.) high, 14.9 cm (5.875 in.) wide. Not Available.
Order number RP-R
SBB R Surface mount Back Box (red)
14 cm (5.5 in.) x 14.2 cm (5.6 in.) x 9.1 cm (3.6 in.)
Order number SBB-R
SBB W Surface mount Back Box (white)
14 cm (5.5 in.) x 14.2 cm (5.6 in.) x 9.1 cm (3.6 in.)
Order number SBB-W
SER R Square Semi flush Extension Ring (red)
12.7 cm (5 in.) square by 4 cm (1.5625 in.) deep
Order number SER-R
SER W Square Semi flush Extension Ring (white)
12.7 cm (5 in.) square by 4 cm (1.5625 in.) deep
Order number SER-W
SFP R Semi flush Plate (red)
15.2 cm (6 in.) square by 0.8 cm (0.3125 in.) thick
Order number SFP-R
SSB 4 Ceiling Support Bridge
60.3 cm (23.75 in.) long by 16.5 cm (6.5 in.) wide
Order number SSB-4