Bosch DDW88MM66, DDW88MM65 User manual and assembly instructions
Register |
your |
||
new |
|
||
|
|
||
device |
|||
MyBosch |
|
on |
|
now |
|||
|
|||
getfree |
|
and |
|
benefits: |
|||
bosch |
|
|
|
-home |
|
||
|
.com/ |
||
welcome |
|||
Extractor hood
DDW88MM65 DDW88MM66
[en] |
User manual and installation instructions |
en Safety |
|
|
Table of contents |
|
|
USER MANUAL |
|
|
1 |
Safety.................................................................... |
2 |
2 |
Avoiding material damage................................... |
4 |
3 |
Environmental protection and saving en- |
|
|
ergy ....................................................................... |
4 |
4 |
Operating modes ................................................. |
5 |
5 |
Familiarising yourself with your appliance ........ |
6 |
6 |
Before using for the first time ............................. |
6 |
7 |
Basic operation .................................................... |
6 |
8 |
Hob-based hood control...................................... |
8 |
9 |
Home Connect ..................................................... |
8 |
10 |
Cleaning and servicing...................................... |
10 |
11 |
Troubleshooting................................................. |
12 |
12 |
Customer Service............................................... |
13 |
13 |
Accessories........................................................ |
13 |
14 |
Disposal.............................................................. |
14 |
15 |
INSTALLATION INSTRUCTIONS ....................... |
14 |
15.3 |
Secure installation ............................................. |
14 |
1 Safety
Observe the following safety instructions.
1.1 General information
¡Read this instruction manual carefully.
¡Keep the instruction manual and the product information safe for future reference or for the next owner.
¡Do not connect the appliance if it has been damaged in transit.
1.2 Intended use
This appliance is designed only to be built into kitchen units. Read the special installation instructions.
The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at its installation location.
Only use this appliance:
¡ For extracting cooking vapour.
¡In private households and in enclosed spaces in a domestic environment.
¡Up to an altitude of max. 4000 m above sea level.
Do not use the appliance:
¡in combination with a gas hob.
¡With an external timer.
1.3 Restriction on user group
This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers.
Children must not play with the appliance. Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised.
Keep children under the age of 8 years away from the appliance and power cable.
1.4 Safe use
WARNING ‒ Risk of fire!
Unsuitable appliance combinations may cause damage.
Do not use the appliance in combination with gas hobs.
WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate.
Keep packaging material away from children.
Do not let children play with packaging material.
Children may breathe in or swallow small parts, causing them to suffocate.
Keep small parts away from children.
Do not let children play with small parts.
WARNING ‒ Risk of poisoning!
Risk of poisoning from flue gases being drawn back in. Room-air-dependent heat-pro- ducing appliances (e.g. gas, oil, wood or coaloperated heaters, continuous flow heaters or water heaters) obtain combustion air from the room in which they are installed and discharge the exhaust gases into the open through an exhaust gas system (e.g. a chim-
2
ney). With the extractor hood switched on, air is extracted from the kitchen and the adjacent rooms. Without an adequate supply of air, the air pressure falls below atmospheric pressure. Toxic gases from the flue or the extraction shaft are sucked back into the living space.
Always ensure adequate fresh air in the room if the appliance is being operated in exhaust air mode at the same time as a room-air-dependent heat-producing appliance is being operated.
It is only possible to safely operate the appliance if the pressure in the room in which the heating appliance is installed does not drop more than 4 Pa (0.04 mbar) below atmospheric pressure. This can be achieved whenever the air needed for combustion is able to enter through openings that cannot be sealed, for example in doors, windows, incoming/exhaust air wall boxes or by other technical means. An incoming/exhaust air wall box alone does not ensure compliance with the limit.
In any case, consult your responsible chimney sweep. They are able to assess the house's entire ventilation setup and will suggest the suitable ventilation measures to you.
WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.
Never operate the appliance without a grease filter.
Clean the grease filters regularly.
Never work with naked flames close to the appliance (e.g. flambéing).
Do not install the appliance near a solid fuel heating appliance (e.g. woodor coalburning) unless the heating appliance has a sealed, non-removable cover. There must be no flying sparks.
Hot oil or grease ignites very quickly.Always supervise hot oil and fat.
Safety en
Never extinguish burning oil or fat with water. Switch off the cooking zone. Extinguish flames carefully using a lid, fire blanket or something similar.
WARNING ‒ Risk of burns!
The accessible parts of the appliance become hot during operation.
Never touch these hot parts.
Keep children at a safe distance.
The appliance becomes hot during operation.
Allow the appliance to cool down before cleaning.
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp edges.
Carefully clean the appliance interior. Items placed on the appliance may fall off.
Do not place any objects on the appliance.
Changes to the electrical or mechanical assembly are dangerous and may lead to malfunctions.
Do not make any changes to the electrical or mechanical assembly.
The light emitted by LED lights is very dazzling, and can damage the eyes (risk group 1).
Do not look directly into the switched-on LED lights for longer than 100 seconds.
If the appliance is operated by another person via the Home Connect app during cleaning, this increases the risk of injury.
Before cleaning, disconnect the appliance from the Home Connect app.
WARNING ‒ Risk of electric shock!
If the appliance or the power cord is damaged, this is dangerous.
Never operate a damaged appliance.
Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box.
Call customer services. → Page 13
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist staff.
Only use genuine spare parts when repairing the appliance.
3
en Avoiding material damage
If the power cord of this appliance is damaged, it must be replaced by trained specialist staff.
An ingress of moisture can cause an electric shock.
Before cleaning, pull out the mains plug or switch off the fuse in the fuse box.
Do not use steamor high-pressure cleaners to clean the appliance.
Penetrating liquid may cause an electric shock.
If a larger amount of liquid is flowing in the appliance, pull out the mains plug or switch off the fuse in the fuse box.
→ "Malfunctions", Page 12
WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic cleaning agents in conjunction with aluminium parts in the interior of the appliance may cause explosions.
Never use highly caustic alkaline or highly acidic cleaning agents. In particular, do not use commercial or industrial cleaning agents in conjunction with aluminium parts, e.g. grease filter on extractor hoods.
2 Avoiding material damage
ATTENTION!
Condensate may cause corrosion damage.
To prevent condensation from building up, switch on the appliance during cooking.
If moisture gets into the controls, this may result in damage.
Never clean controls with a wet cloth. Incorrect cleaning damages the surfaces.
Follow the cleaning instructions.
Do not use harsh or abrasive detergents.
Clean stainless steel surfaces in the direction of the finish only.
Never clean controls with stainless steel cleaners.
Condensation that flows back in may damage the appliance.
The air extraction duct must be installed with a gradient of at least 1° from the appliance.
If you put incorrect stress on the design elements, they may break off.
Do not pull design elements.
Do not place objects on the design elements or hang objects from them.
There is a risk of surface damage if you do not peel off the protective film.
Remove the protective film from all parts of the appliance before using for the first time.
Objects set down on the appliance may damage the appliance when it is extended.
Do not place any objects on the appliance.
With the remote control via the Home Connect app in particular, ensure that there are no objects on the appliance.
3 Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.
Sort the individual components by type and dispose of them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use less power.
Note:
For this appliance, an energy consumption value has been established in accordance with EN 61591, (EU) No 66/2014 and delegated regulation (EU) No.
65/2014:
¡The measurements are taken when the appliance is delivered.
¡No cooking surface lighting is available on the appliance.
¡When determining the fluid-dynamic efficiency, the ambient lighting in light colour red operates at maximum brightness.
If you use the Guided Air function, the specified energy values and consumption values may differ.
Ensure that there is sufficient ventilation when cooking.
¡The appliance works more efficiently and with fewer operating noises.
Adjust the fan speed to the amount of steam produced during cooking.
¡The lower the fan speed, the less energy is consumed.
Only use intensive mode when required.
If cooking produces large amounts of steam, select a higher fan speed in good time.
¡ The odours are distributed around the room less.
4
Operating modes en
Switch the appliance off when you are not using it. ¡ The appliance does not consume any energy.
Switch off the lighting if you no longer require it. ¡ The lighting does not consume any energy.
Clean or replace the filters at regular intervals. ¡ The effectiveness of the filter is retained.
Put the cooking lid on.
¡The cooking vapours and condensation are reduced.
4 Operating modes
You can use your appliance in air extraction mode or circulating-air mode.
The saturation indicator must be adjusted to the selected operating mode and the filters used. → Page 7
4.1 Air extraction mode
The air which is drawn in is cleaned by the grease filters and conveyed to the exterior by a pipe system.
The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels (not applicable to appliances that only discharge the air back into the room).
¡If the exhaust air is to be conveyed into a non-functioning smoke or exhaust gas flue, you must obtain the consent of the heating engineer responsible.
¡If the exhaust air is conveyed through the external wall, a telescopic duct should be used.
4.2 Air recirculation mode
The air which is drawn in is cleaned by the grease filters and an odour filter, and conveyed back into the room.
To bind odours in circulating-air mode, you must install an odour filter. The different options for operating the appliance in circulating-air mode can be found in our catalogue. Alternatively, ask your dealer. The required accessories are available from specialist retailers, from customer service or from the Online Shop.
5
en Familiarising yourself with your appliance
5 Familiarising yourself with your appliance
5.1 Controls
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.
7 |
5 |
|
|
6 |
4 |
3 |
|
|
2 |
|
1 |
1 |
Fan setting 1 |
2 |
Fan setting 2 |
3 |
Fan setting 3 |
4 |
Intensive mode 1 |
5 |
Intensive mode 2 |
6 |
Odour filter saturation indicator1 |
7 |
Grease filter saturation indicator |
1 Depending on the appliance specifications
Switching the appliance on or off
Increasing the fan setting
Decreasing the fan setting
Switching automatic mode1 on or off
Home Connect
Reset the filter saturation indicator
Removing or inserting the grease filter/odour filter1
Switching Guided Air on or off
1 Depending on the appliance specifications
6 Before using for the first time
Configure the settings for initial start-up. Clean the appliance and accessories.
When using it in circulating-air mode, set the operating mode.
→ "Setting the saturation indicator", Page 7
6.1 Setting an operating mode
Your appliance is set to air extraction mode by default. Note: When using it in circulating-air mode, you require additional accessories.
7 Basic operation
7.1 Switching on the appliance
Press 
to switch on the appliance. a The appliance starts at fan setting 2.
a The Ambient Light automatically switches on.
7.2 Switching off the appliance
Press 
.
a The fan run-on starts at fan setting 1.
aThe Ambient Light remains switched on for approx. 10 minutes.
a The glass panel remains extended halfway.
aThe appliance switches off automatically after approx. 10 minutes.
aThe glass panel moves downwards and the appliance closes.
7.3 Selecting a fan setting
Press 
or 
.
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you can use intensive mode.
1.Press 
repeatedly until LED 4 lights up in the LED display for intensive mode 1.
6
Loading...