Bosch DCN-SWSACC-E Specsheet

Communications Systems | DCN‑SWSACC Standalone Automatic Camera Control

DCN‑SWSACC Standalone Automatic
Camera Control

www.boschsecurity.com

u On‑screen Pan, Tilt and zoom control

u Supports Windows 7

u For use with DCN Next Generation and DCN

Wireless Discussion Systems

u Print‑out of configuration setting

u On‑screen help facility

DCN‑SWSACC Standalone Automatic Camera Control
of the DCN Conference systems interfaces with the
Bosch Allegiant or Autodome. It selects fixed or
movable cameras to be activated to display the current
active speaker at a conference.

Functions

When a chairman or delegate microphone is activated
on the DCN Conference system equipment, the
camera assigned to that position is activated. When
none of the microphones are active, an overview
camera is automatically selected. The image can be
displayed on projectors or other screens together with
information about the current speaker if required
(such as delegate identification). The system operator
has a dedicated screen, which also displays
information about which camera is active. This system
provides an extra dimension to conference
proceedings.
The DCN‑SWSACC software runs on a PC which is
temporarily connected to configure the DCN Next
Generation or DCN Wireless Discussion System and
the Bosch Allegiant or Autodome.

With this PC the camera positions can be defined
using the on-screen Pan, Tilt and Zoom control and
stored as prepositions in the Autodome camera. At the
same time a delegate position is linked to a camera
preposition.
When all delegate positions are linked to camera
prepositions the configuration needs to be uploaded
to the DCN Conference system where it will be stored
persistent in the CCU.
The configuration file can be printed and stored on the
temporarily PC for later use. In case help or more
information is needed the on‑screen help can be
activated from the software.
After configuration the PC is removed and Bosch
Allegiant or Autodome is directly connected to the
DCN Conference system.

Technical specifications

Electrical

Supported DCN systems DCN Next Generation version

2.68 or higher

DCN Wireless Discussion System

version 2.68 or higher

2 | DCN‑SWSACC Standalone Automatic Camera Control

Represented by:

Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:

Bosch Security Systems, Inc.
12000 Portland Avenue South
Burnsville MN 55337, USA
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.com

Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[e-mail]
www.boschsecurity.com

Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.asia

Bosch (Shanghai) Security Systems Ltd.
201 Building, No. 333 Fuquan Road
North IBP
Changning District, Shanghai
200335 China
Phone [phone]
Fax: [phone]
www.boschsecurity.com.cn

Robert Bosch Ltda Security Systems Division
Via Anhanguera, Km 98
CEP 13065-900
Campinas, Sao Paulo, Brazil
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.com

© Bosch Security Systems 2013 | Data subject to change without notice
1808204427 | en, V3, 03. Jun 2013

Supported operating systems Windows 7 Home Premium (32

and 64 bits) or above.

Windows Vista Home Premium

(32 and 64 bits) or above.

PC requirements Dual core processor (2.66 GHz)

and 2 Gb internal memory.

At least one serial port (2 serial

ports are preferred).

In case a PC without serial ports is

used one or two separate USB to
serial port converters are needed.

Mechanical

Dimensions (H xW x D) 240 x 180 x 46 mm

Weight 0.375 kg

Ordering information

DCN‑SWSACC Standalone Automatic Camera Control

interfaces DCN Conference systems with the Bosch
Allegiant or Autodome.

Order number DCN-SWSACC