Bosch CAM940C, CAM940CE Specifications
Intrusion Systems | CAM940C and CAM940CE PIR Motion Detectors with Covert Color Camera
The CAM940C and CAM940CE provide passive infrared
(PIR) signals and standard composite video signals. Each
detector completely conceals one integrated CCD color
camera, providing discreet and covert video for coverage
areas. The color camera in the CAM940C provides NTSC
video, while the color camera in the CAM940CE provides
PAL video.
Both models include timers and relay outputs for alarm and
VCR control. Selectable modes for either switcher or PIR
control offer a lower current draw option.
Functions
PIR Signal Processing
Motion Analyzer II uses multiple thresholds and timing
windows to analyze timing, amplitude, duration and polarity
of signals to make an alarm decision. Will not alarm on
extreme levels of thermal and illumination disturbances
caused by heaters and air conditioners, hot and cold drafts,
sunlight, lightning, and moving headlights. Two sensitivity
settings are provided.
Intelligent Camera Control
Form C contacts activate external devices such as VCRs or
lights. When the PIR detects motion, the contacts follow a
field-selectable timer. The timer adjusts from 15 seconds to
60 seconds and restarts each time the PIR detects motion.
Installers can program the camera to operate continuously
or to follow the timer.
Certifications and Approvals
Region Certification
Europe CE 2004/108/EC; EN 50130-4:1996
+A1:1998 +A2:2003; EN 60950-1:2006
Belgium INCERT E model only: B-509-0007
USA UL ANSR: Intrusion Detection Units (UL639)
CAM940C complies with FCC Part 15
CAM940C and CAM940CE PIR Motion
Detectors with Covert Color Camera
▶
Full function PIR
▶
Integrated pinhole CCD color camera with 3.4 lx light
sensitivity
▶
420 TV lines of horizontal resolution
▶
Motion Analyzer II processing
▶
Intelligent camera control (camera can be left on or
controlled by the PIR)
▶
12 m x 12 m (40 ft x 40 ft) PIR coverage
▶
Dual relay outputs for alarm and VCR control
▶
Includes video cable with BNC connector
www.boschsecurity.com
2 | CAM940C and CAM940CE PIR Motion Detectors with Covert Color Camera
Installation/Configuration Notes
12 m
20
40 ft
0
0 ft
0
6 m
6 m
20
0 ft
0 ft
0 ft
0 m
9 ft
3 m
40 ft
0 m
11 m
Standard Broad Coverage: 12 m x 12 m (40 ft x 40 ft)
Mounting Considerations
The detectors can be surface-mounted directly on a wall,
mounted onto a B335-3 Low Profile Mount Bracket
(included), or mounted onto a B338 Universal Ceiling
Bracket (optional).
Wiring Considerations
The included video output cable connects up to 152 m
(500 ft) of RG59/U or similar coaxial cable.
Parts Included
Quantity Component
1 Video cable with BNC connector
1 B335-3 Low Profile Mount Bracket
Technical Specifications
Electrical
Power
Input Voltage 10 VDC to 14 VDC
Input Current (Standby) 35 mA at 12 VDC
Input Current (Alarm or Camera On) 150 mA at 12 VDC
PIR
Alarm Relay One Form A normally-closed (NC) con-
tact rated for 125 mA at 12 VDC
Tamper Relay One Form A normally-closed (NC) con-
tact rated for 125 mA at 12 VDC
Video
Pick-up Device for CAM940CE 8.467 mm (1/3 in.) color CCD, PAL
standard
Pick-up Device for CAM940C 8.467 mm (1/3 in.) color CCD, NTSC
standard
Scanning System 2:1 interlace
Output 1 V p-p, 75 Ohm
Minimum Illumination 3.4 lx with pinhole lens
Relay and Timer Form C normally-open (NC) and nor-
mally-closed (NC) contacts, 125 mA at
12 VDC. Timer adjusts from 15 seconds to 60 seconds.
Lens and Iris
Lens 3.6 mm pinhole with 75° field of view
Shutter Speed for CAM940CE 1/50 sec to 1/100,000 sec
Shutter Speed for CAM940C 1/60 sec to 1/100,000 sec
Resolution
Horizontal Up to 420 TV lines
Mechanical
Material High-impact, fire-retardant, ABS plas-
tic enclosure
Dimensions 95 x 57 x 38 mm
(3.75 x 2.25 x 1.5 in.)
Mounting Wall or bracket
Environmental
Operating Temperature -10°C to +49°C (+14°F to +120°F)
For UL Certificated installations,
0°C to +49°C (+32°F to +120°F)
Environmental Class II
IP Rating IP 41, IK02 (EN60529, EN50102)
Loading...