Bosch Blue Line Gen2 User Manual

Intrusion Alarm Systems | Blue Line Gen2 TriTech Motion Detectors

Blue Line Gen2 TriTech Motion Detectors

www.boschsecurity.com

u Pet‑friendly Selectable model available – optimize

installation for pet (45 kg [100 lb]) and non‑pet
applications

u Dynamic Temperature Compensation – superior

catch performance in any environment

The Blue Line Gen2 TriTech Motion Detectors (ISC­BDL2) use a combination of passive infrared (PIR) and
microwave Doppler radar detection with advanced
signal processing. The pet‑friendly (‑WP) models
generate alarms for human intruders without
generating false alarms for pets. These small
unobtrusive detectors are simple to install and do not
need field adjustments.

Functions

First Step Processing (FSP)

First Step Processing (FSP) almost instantly responds
to human targets without producing false alarms from
other sources. FSP adjusts the detector's sensitivity
based on signal amplitude, polarity, slope, and timing.
This eliminates the need for the installer to select the
sensitivity level, thus improving ease of installation and
reliability.

Pet‑friendly Selectivity (‑WP models only)

The installer can turn pet immunity on or off based
upon application requirements. When pet immunity is
turned off, the detector provides superior catch
performance identical to the non‑pet models. When
pet immunity is turned on, the detector can

u Microwave Noise Adaptive processing – reduce false

alarms from repetitive sources

u Wall to Wall Coverage – superior catch performance

u Flexible Mounting Height, No Adjustments – reduce

installation time and false alarms, improve catch
performance

distinguish between signals caused by humans and
signals caused by pets. It ignores signals caused by
one or two pets up to 45 kg (100 lb) or numerous
rodents.

Microwave Noise Adaptive Processing

Microwave Noise Adaptive Processing adjusts to
background disturbances, reducing false alarms
without sacrificing intruder detection.

Dynamic Temperature Compensation

The detector intelligently adjusts its sensitivity so that
it can identify human intruders at virtually any
temperature.

Wall-to-Wall Coverage

An improved lookdown zone and coverage range of
12 m x 12 m (40 ft x 40 ft) provide wall-to-wall
coverage.

Self-locking Enclosure

The sliding self‑locking enclosure has an integrated
bubble level and custom gap‑free, lift‑gate style
terminal blocks to make installation easier.

94°

2 | Blue Line Gen2 TriTech Motion Detectors

Sealed Optics and Electronics

The optics and electronics are assembled into the
front enclosure and sealed with a protective cover to
prevent damage during installation. The sealed optical
chamber also prevents drafts and insects from
affecting the detector.

Test Features

Externally visible alarm LED can be disabled after
installation.

RFI and Impact Immunity

E-models feature improved immunity to false alarms
from external sources including radio frequency
interference, “popcorn noise”, as well as physical
impact. Through use of a high performance pyro
(infrared) sensor with integrated signal filtering, the
highest quality electrical components and design that
produces the best-in-class signal to noise ratio, and
sophisticated signal processing, these detectors are
more robust than ever against false alarms.

Improved Resistance to Sabotage

E-model detectors are now tested and approved to the
EN50131-5-3 requirements for immunity to
interference from external radio frequency sources.
Detection performance and false alarm immunity are
ensured when in the presence of such sources that
could degrade the performance of detectors that are
not approved to this standard.

Region Regulatory compliance/quality marks

FCC [ISC-BDL2-W12G, ISC-BDL2-WP12G,

ISC-BDL2-WP6G]

Canada ULC CAN/ULC S306-03 - Canadian Standard

for Intrusion Detection Units

IC [ISC-BDL2--W12G, ISC-BDL2-WP12G,

ISC-BDL2-WP6G]

France AFNOR EN50131-2-4 Grade 2, NF324-H58 +

RTC 50131-2-4 ISC-BDL2-W12HE - Cer­tificate # 2820200003A1 ISC-BDL2­WP12HE - Certificate #
2820200003B1

China CCC 2010031901000323 [ISC-BDL2-

WP6G-CHI, ISC-BDL2-WP12G-CHI, ISC­BDL2-CB12G-CHI]

Installation/configuration notes

Coverage Patterns

Certifications and approvals

These detectors are also designed to comply with the following:

Europe Complies with Directive 2002/95/EC - Restriction of the

use of certain Hazardous Substances (RoHS)

China Complies with CCC GB10408.1 and GB10408.9

Region Regulatory compliance/quality marks

Europe CE 2014/53/EU (RED) 2011/65/EU

EN50131EN50131-2-4 Grade 2 Environmental

Belgium INCERT 2800200003D1

INCERT ANPI-ID-0004-0002 ISC-BDL2-W12GE,

Sweden SBSC 20-43 Intyg_20-43_ISC-BDL2-

SBSC 20-44 SBSC_ISC-BDL2-WP12GE

USA UL [ISC-BDL2-W12G, ISC-BDL2-WP12G,

UL 20190115; UL639 – Standard for Intru-

(RoHS) (EU 2015/863 amending Annex
II to Directive 2011/65/EU [Notified
body 0700]) | [ISC-BDL2-W12GE, ISC­BDL2-WP12GE, ISC-BDL2-W12HE, ISC­BDL2-WP12HE]

Class II (G models) I (H models)

ISC-BDL2-WP12GE

W12GE_EN

ISC-BDL2-WP6G]

sion-Detection Units