Bosch B299 User Manual

Intrusion Alarm Systems | B299 Expansion module, SDI2

B299 Expansion module, SDI2

www.boschsecurity.com

u Provides point identification for up to 100

connected addressable initiating devices using POPITs

u Supervises wiring to devices for circuit integrity

The B299 POPEX Module is an SDI2 compatible device. The module communicates to the control panel over the SDI2 bus, and provides support for up to 100 POPIT (Point Of Protection Input Transponder) devices. This occurs over a single expansion loop using two pairs of terminals.

System overview

Each module installs in the control panel enclosure or in an adjacent approved enclosure. Future system expansion is very economical as the module supports zone expansion through supporting D9127U/T POPIT modules and POPIT’ed detectors. The POPIT modules can be placed anywhere along the two-wire data expansion loop from the module.

Certifications and approvals

Region Regulatory compliance/quality marks

USA ANSI-

SIA

CP-01-2010-Control Panel Standard Features for False Alarm Reduction

UL Underwriters Laboratories

UL UL 1023 - Household Burglar Alarm Sys-

tem Units

UL UL 1076 - Proprietary Burglar Alarm

Units and Systems

u Expands the number of points in the system

u Compact size

u Interconnect wiring connectors for easy installation

Region Regulatory compliance/quality marks

UL UL 1610 - Central Station Burglar Alarm

Units

UL UL 1635 - Standard for Digital Alarm

Communicator System Units

UL UL 294 - Standard for Access Control

Units and Systems

UL UL 365 - Police Station Connected Bur-

glar Alarm Units

UL UL 609 - Standard for Local Burglar

Alarm Units and Systems

UL UL 636 - Holdup Alarm Units and Sys-

tems

UL UL 864 - Standard for Control Units and

Accessories for Fire Alarm Systems (10th edition)

UL UL 985 - Household Fire Warning Sys-

tem Units (6th edition)

FM Central Station

FM Local Protective Signaling

FM Remote Station

CSFM California Office of The State Fire Mar-

shall

FCC Part 15 Class B

2 | B299 Expansion module, SDI2

Represented by:

Europe, Middle East, Africa: Germany: North America: Asia-Pacific:

Bosch Security Systems B.V. P.O. Box 80002 5600 JB Eindhoven, The Netherlands Phone: + 31 40 2577 284 emea.securitysystems@bosch.com emea.boschsecurity.com

Bosch Sicherheitssysteme GmbH Robert-Bosch-Ring 5 85630 Grasbrunn Germany www.boschsecurity.com

Bosch Security Systems, LLC 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180 onlinehelp@us.bosch.com www.boschsecurity.us

Robert Bosch (SEA) Pte Ltd, Security Systems 11 Bishan Street 21 Singapore 573943 Phone: +65 6571 2808 Fax: +65 6571 2699 apr.securitysystems@bosch.com www.boschsecurity.asia

Region Regulatory compliance/quality marks

Canada ULC Underwriters Laboratories of Canada

ULC CAN/ULC S303 - Local Burglar Alarm

Units and Systems

ULC CAN/ULC S304 - Standard for Signal Re-

ceiving Center and Premise Burglar Alarm

ULC CAN/ULC S545 - Residential Fire Warn-

ing System Control Units

ULC ULC-ORD C1023 - Household Burglar

Alarm System Units

ULC ULC-ORD C1076 - Proprietary Burglar

Alarm Units and Systems

IC ICES-003 - Information Technology

Equipment (ITE)

Installation/configuration notes

Mounting

Mount the module into the enclosure’s 3-hole mounting pattern using the mounting screws and mounting bracket.

Wiring

Use the control panel SDI2 terminals labeled R, Y, G, B (PWR, A, B, COM) when wiring to the module. Connect the control panel terminals to the module terminals labeled R, Y, G, B (PWR, A, B, COM). You can also use the SDI2 interconnect cable.

Compatibility

POPIT devices

D9127U/T POPIT module ZX776Z/ZX794Z PIR motion detector ZX835 TriTech motion detector ZX935Z/ZX938Z PIR motion detector ZX970 TriTech motion detector D278S 12V smoke base D298S 24V smoke base F220-B6PM POPIT smoke (master) F220-B6PS POPIT smoke base FMM-462 Manual station FMM-462-D Manual station double action

Parts included

Quan

Component

tity

1 Interconnect cable

1 Installation manual

Technical specifications

Properties

Dimensions 2.9 in x 5.0 in x 0.6 in

(73.5 mm x 127 mm x 15.25 mm)

Weight 11.2 oz (0.30 kg)

Environmental considerations

Relative humidity 5% to 93% at +32°C (+90°F)

Temperature (operating) 0°C to +49°C (+32°F to +120°F)

Power requirements

Current Standby: 35 mA + total device current

Alarm: 35 mA + total device current

Voltage (input) 12 VDC

Wiring

Terminal wire size 12 AWG to 22 AWG (2.0 mm to 0.65

mm)

SDI2 wiring Maximum distance – Wire size

(unshielded wire only): 200 ft (60 m) 22 AWG (0.65 mm), 500 ft (152 m) 18 AWG (1.02 mm)

POPIT loop wiring Maximum wire length: 1800 ft (548 m)

- 22 AWG (0.65 mm), 4600 ft (1402 m) - 18 AWG (1.02 mm)

Ordering information

B299 Expansion module, SDI2

Provides system expansion support for up to 100 POPIT devices

Order number B299

Quan

Component

tity

1 Module

1 Hardware pack