Bosch 5601P, 5602, 5603, 5604, 5621 Specsheet
...
Fire Alarm Systems | 5600 Mechanical Heat Detectors
5600 Mechanical Heat Detectors
www.boschsecurity.com
u Post-activation indicator to easily identify units in
alarm
u Multiple configurations satisfy a broad range of
installations
The System Sensor 5600 Series Mechanical Heat
Detectors provide low-cost property protection against
fire and non-life-safety installations where smoke
detectors are inappropriate.
Notice
For life-safety installations, smoke detectors must
be used in lieu of or in addition to heat detectors.
Functions
Detector Labeling
The 5601P has a plain, unlabeled housing and is
intended for residential applications. All other models
have labeled housings to ensure that the proper
detector is being used. Alphanumeric characters
identify the activation method (FX for fixed
temperature or FX/ROR for combination fixed
temperature and rate-of-rise units) and the
temperature rating in degrees Fahrenheit and degrees
Celsius.
Post-activation Fixed-temperature Indicator
When the detector is activated, the collector drops
from the unit. This allows easy identification of all
units in alarm.
u Broad range of back box mounting options
u Reversible mounting bracket for surface-mount or
flush‑mount installations
Notice
The fixed-temperature sensors cannot be reset so
they are not testable. The rate-of-rise sensors
automatically reset and can be tested if care is
taken to avoid exceeding the fixed-temperature
setting of the detector.
Certifications and approvals
System Sensor holds these Listings and Approvals:
NYC/MEA 199-03-E
Region Certification
USA UL UQGS: Heat - Automatic Fire Detectors
(UL521)
FM 5600 Family
CSFM see our website
Installation/configuration notes
Compatibility Information
These mechanical heat detectors are compatible with
all UL Listed Fire Alarm Control Panels (FACPs).
2 | 5600 Mechanical Heat Detectors
Mounting Considerations
Mount the detectors on ceilings using 3.5-inch or 4inch octagonal back boxes, single-gang boxes, or 4inch square back boxes with a square-to-round plaster
ring. The mounting bracket is reversible for use in
either surface-mount or flush-mount installations.
Wiring Considerations
The terminal blocks accept wires from 14 AWG to
22 AWG (ISO 2.5 mm2 to 0.34 mm2).
Parts included
Quant. Component
1 Mechanical heat detector
1 Literature pack
Technical specifications
Contact Ratings
Contact Ratings
6 VAC to 125 VAC: 3 A
6 VDC to 28 VDC: 1 A
125 VDC: 0.3 A
250 VDC: 0.1 A
Electrical
Voltage (operating): 6 VAC to 125 VAC, 6 VDC to 28 VDC,
125 VDC, or 250 VDC
Environmental
Relative Humidity: 5% to 95%, non-condensing
Temperature (installation)
+135°F (+57°C) Models: The normal ambient temperature is not
+194°F (+90°C) Models: The normal ambient temperature is not
to exceed +100°F (+38°C)
to exceed +150°F (+66°C)
Mechanical
Dimensions
(with mounting bracket):
Rate-of-rise Threshold: +15°F (+8.3°C) per min.
4.6 in. x 1.7 in. (11.6 cm x 4.4 cm)
Ordering information
5601P Single‑circuit, Fixed‑temperature (+135°F),
Rate‑of‑rise Mechanical Heat Detector
System Sensor® single-circuit fixed‑temperature
(+135°F), rate‑of‑rise mechanical heat detector.
Order number 5601P
5602 Single‑circuit, Fixed‑temperature (+194°F),
Rate‑of‑rise Mechanical Heat Detector
System Sensor® single‑circuit, fixed‑temperature
(+194°F), rate‑of‑rise mechanical heat detector.
Order number 5602
5603 Single‑circuit, Fixed‑temperature (+135°F) Mechanical Heat Detector
System Sensor® single‑circuit, fixed‑temperature
(+135°F) mechanical heat detector.
Order number 5603
5604 Single‑circuit, Fixed‑temperature (+194°F) Mechanical Heat Detector
System Sensor® single‑circuit, fixed‑temperature
(+194°F) mechanical heat detector.
Order number 5604
5621 Dual‑circuit, Fixed‑temperature (+135°F),
Rate‑of‑rise Mechanical Heat Detector
System Sensor® dual‑circuit, fixed‑temperature
(+135°F), rate‑of‑rise mechanical heat detector.
Order number 5621
5622 Dual‑circuit, Fixed‑temperature (+194°F),
Rate‑of‑rise Mechanical Heat Detector
System Sensor® dual‑circuit, fixed‑temperature
(+194°F), rate‑of‑rise mechanical heat detector.
Order number 5622
5623 Dual‑circuit, Fixed‑temperature (+135°F) Mechanical Heat Detector
System Sensor® dual‑circuit, fixed‑temperature
(+135°F) mechanical heat detector.
Order number 5623
5624 Dual‑circuit, Fixed‑temperature (+194°F) Mechanical Heat Detector
System Sensor® dual‑circuit, fixed‑temperature
(+194°F) mechanical heat detector.
Order number 5624
Weight: 6 oz (170 g)
Trademarks
All hardware and software product names used in this
document are likely to be registered trademarks and
must be treated accordingly.
Loading...