Bosch 2601 User Manual

Instruction Manual

EN Keyboards

LTC 2601/00, LTC 2602/00

© 2004 Bosch Security Systems GmbH
3935 890 09114 04-34 | August 17, 2004 | Data subject to change without notice.

Bosch Security Systems, Inc.
850 Greenfield Road
Lancaster, PA 17601 USA
Tel: [phone]
Fax: [phone]
www.boschsecuritysystems.com

Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven
The Netherlands
Tele [phone]

Bosch Security Systems Pte Ltd.
38C Jalan Pemimpin
Singapore 577180
Republic of Singapore
Tel: [phone]

EN|2

LT C 2601/00, LTC 2602/00 Series | Instruction Manual | Unpacking

1UNPACKING

This electronic equipment should be unpacked and
handled carefully.

Check for the following items:

•Verify the unit model number

•Keyboard cable (part# 303-0239-001)

If an item appears to have been damaged in shipment,
replace it properly in its carton and notify the shipper.
If any items are missing, notify your Bosch Security
Systems, Inc. Sales Representative or Customer Service.

The shipping carton is the safest container in which the
unit may be transported. Save it for possible future use.

2SERVICE

If the unit ever needs repair service, the customer
should contact the nearest Bosch Security Systems Inc.
Service Center for authorization to return and shipping
instructions.

Service Centers

USA

Phone: [phone] or 717-735-6638

fax: [phone] or 717-735-6639

CCTV Spare Parts

Phone: [phone] or 408-956-3853 or 3854

fax: [phone]

e-mail: [e-mail]

Canada

Phone: [phone]

Europe, Middle East & Asia Pacific Region

Phone: [phone]
For additional information, see
www

.boschsecuritysystems.com.

3DESCRIPTION

The LTC 2601/00 and LTC 2602/00 are full-function
Keyboards designed for system control, programming,
and pan/tilt/zoom operation with the LTC 2600 Series
Enhanced Model Multiplexers. The instructions for
installing and operating the LTC 2601/00 and
LTC 2602/00 Keyboards are included in the
instructions for use for the LTC 2600 Series Video
Multiplexers.

4INSTALLATIO N

1. Install one end of the KB cable RJ-11
connector to the back of the LTC 2601/00 or
LTC 2602 Keyboard.

2. Insert the other end of the Keyboard Cable
into the input port.

NOTE: 390Ω termination resistor must be
connected to the output port.

5OPTIONS

•LTC 8558/00 Keyboard Extension Kit:
Required for distances from 10ft to 100ft.

•LTC 8557/60 Keyboard Extension Kit:

Required for distances over 100ft.