
© Copyright Trek Bicycle Corporation 2004
Figure 1- Bontrager road crankset
Read this manual before you ride

check that the chain is clean, free of rust, and properly oiled. A dirty
check your chain for wear with a chain wear gauge or a ruler. Each
inspect your pedals. Tighten the pedals into
inspect the crankset. Clean the chainrings
Also check the bottom bracket adjustment, and tighten the crank
clean and oil the chain. Place a rag behind the chain to avoid getting
When installing a threaded part, apply a small amount of bicycle grease to the threads,

you are not sure of your ability to correctly install this crankset and adjust the
Inspect your crankset regularly.

vary from place to place. This warranty does not affect the statutory rights of
A conventional crankset is comprised of a left crankarm, right crankarm, and
bottom bracket. With the Bontrager Road crankset, the right crank arm and
bottom bracket are inseparable.