HyperCore™ microchannel coil technology standard on all units
•
Painted steel cabinets for superior strength and corrosion protection
•
Heavy duty steel raised base with 1-1/2" legs
•
Fan guards and wiring conduit on indoor models
•
Serviceability
Suction service valves for hermetic and scroll compressors located
•
outside the cabinet for quick installations. Semi-hermetic compressor
models have a suction valve on the compressor and an access tting
on the suction line entering the cabinet.
Receiver with fusible plug, liquid shuto valve and charging port
•
is standard
Large electrical panel for ease of access
•
Prefabricated wiring harnesses for tight crimp connections and
•
consistent labeling
Unit stays on if the hood is removed for servicing
•
Sight glass is easily viewable
•
Quality
All units are completely leak tested in a helium environment,
•
bump tested and allowed to cycle o on the high and low pressure
control. Each unit has a copy of the run data shipped inside the
electrical panel
Electrical circuits are completely checked for continuity
•
Piping is laid out to minimize stress and vibration and is pre-bent to
•
eliminate leaks
Encapsulated, auto-reset, high and low pressure controls to
•
eliminate leaks (standard on all high and medium temperature
models, adjustable low pressure control standard on low
temperature models)
Components
Fan
Specically matched with motor and coil to attain maximum air
•
movement and cooling
Motor
Rated for 50 and 60 cycle application
•
Standard PSC or optional Variable Speed EC (VSEC) with
•
Orbus™ Controller
Compressor
Wide variety of compressors including: hermetic, semi-hermetic
•
and scroll. R-22 and R-404A/507 available for both medium and low
temperature applications
Spring-mounted compressors with vibration eliminators on all 1-1/2
•
to 6 HP semi-hermetic compressors; 1/2 to 1 HP compressors are
rigid mounted and have a discharge loop
Discharge service valves come standard on all units
•
including hermetics
Typical Outdoor Hermetic Unit
Typical Outdoor Unit with throwaway liquid-line
lter and sight glass
Typical Outdoor Hermetic Unit with liquid lter drier
and sight glass
3
Page 3
SCROLL COMPRESSORS
Performance Data - Low Temperature (R-404A/507)
* = T for Outdoor, N for Indoor, B for Bohnmizer, S for Beacon II™
++ = See Dimensional Drawings for details. † = Estimated sound pressure values are 10 feet from the unit. For estimating sound pressure from the unit at dierent
distances, deduct the following from the unit values: 20 feet, deduct 6 dBA for 40 feet, deduct 12 dBA for 80 feet, deduct 18 dBA. This data is typical of “free eld”
conditions for horizontal air cooled condensing units at the outlet of the discharge air. The actual sound measurements may vary depending on the condensing
unit installation. Factors such as reecting walls, background noise and mounting conditions may have a signicant inuence on this data.
* = T for Outdoor, N for Indoor, B for Bohnmizer, S for Beacon II™
Per UL and NEC, RLA values have been calculated by dividing the Maximum Continuous Current (MCC) by 1.56.
^ Power supplied by customer. † Consult factory for 50 HZ applications.
Part Number
Power SupplyCompressorFan MotorMCAMOPD
VoltsPh Hz†RLALRAQty. HP FLA Air Elec.AirElec.
Evap.
Fan
Amps
Sound
Data dBA
Defrost
Heater
Amps
†
15
Page 5
1/2, 3/4 AND 1HP
1-1/2 AND 2HP
3HP - ALTERNATE CABINET
3, 4, 5 AND 6HP
AIR
FLOW
AIR
FLOW
AIR
FLOW
AIR
FLOW
SUCTION
LIQUID
LIQUID
SUCTION
LIQUID
LIQUID
SUCTION
FRONT VIEW
OUTDOOR
7/16 DIA HOLE
TYP 4 PLCS
7/16 DIA HOLETYP 4 PLCS
SUCTION
28-1/4
23-3/4
17-1/4
3
1-7/8
4-1/16
2-3/4
21-1/8 CL
2-3/8
2-9/16
1-3/4
4-9/16
21-1/8 CL
2-9/16
2-3/8
1-3/4
4-9/16
28-1/4
28-1/4
2-5/8
1-11/16
4-9/16
21-1/8 CL
23-1/8 CL
2-5/8
2-9/16
2-9/16
2-1/16
4-9/16
30-1/4
1-7/8
4-1/16
3
2-3/4
37-3/4
17-1/4
3-1/4
3-13/16
4-15/16
5-1/4
1-15/16
2-1/4
3-11/16
37-3/4
19-3/4
42-1/2
29-3/4
3-1/4
3-13/16
4-15/16
5-1/4
1-15/16
2-1/4
3-11/16
LEFT VIEW
Dimensional Drawings
OUTDOOR
22
Page 6
1/2 - 6 HP Air-cooled Condensing Units
OUTDOOR (T)
• Prepainted galvanized cabinet
• Head pressure control valve
• Crankcase heater
• Fixed low pressure control for H2, M2,
M6 models
INDOOR (N)
• No cabinet hood
• Fan guards
• Wiring conduit
• Fixed low pressure control for H2, M2,
M6 models
1/2 - 4 HP (BS*) Semi-hermetic Low Temperature R-404A/R-507 Condensing Units
++ ZF Compression units include standard liquid line required for liquid injection. The Scroll® compressors can also be used for R-22 medium and low temperature applications. See sales bulletin for capacities.
* Model numbers are normally in stock (Stock models come standard with LL drier assembly, timer on 011-035 L6, defrost kit on 040-060 L6).
9,917208-230/3/60ZF09K4E255
10,808208-230/3/60ZF11K4E254
12,240208-230/3/60ZF13K4E350
13,345208-230/3/60ZF18K4E360
Beacon II™ OUTDOOR (S)
• Outdoor unit with hood
• Wired for Beacon II™ control
• Beacon II™ fan cycling for two fan
units only
• Head pressure control valve
ALL MODELS
2 - 6 HP (BZ*) Scroll® Low Temperature R-404A/R-507 Condensing Units
February 1, 2008 Bohn Refrigeration Products List Prices 39
Page 7
1/2 - 6 HP Factory-installed Options
Air-cooled Condensing Units
Electrical OptionsModel
Air Defrost timer, medium temperatureAll494494-
Electric defrost timer005 - 035494494-
Defrost
Electric Defrost Kit: timer, heater and fan contactors,lockout relay
Adjustable low pressure control for H2, M2, and M6 modelsAll137137137
Dual pressure control with superhoseAll308308-
Mounted fused disconnect
Phase loss/ low voltage monitorAll971971-
Fixed fan cycling (2 fan units)
Variable speed fan motor using the Homan controller (in place of head
pressure control valve on outdoor unit)
030M6 - 060M6704704-
040L6 - 060L6704704-
005 - 035488-488
040 - 060899-899
015 - 029
Medium
Up to 035L6 Low339339-
030 - 060
Medium
Temperature
Only
Mechanical OptionsModel
Liquid-line drier, sight glass and shut-o valve sight glass, shut-o
valve (Standard on ZF Scroll compressor)