Bock Water heaters 541PG, 71PG, 361PG User Manual

PowerGas

Commercial Water Heaters

Featuring...

 68 to 113 Gallon Capacities

 155,000 to 623,000 BTU



 Dual Magnesium Anode Rods to Inhibit Corrosion

 Standard & ASME Construction

 Barometric draft control furnished with all models

 Propane gas available on request

 Power gas burner with spark ignition,
100% safety shut-o.

 80% Thermal Eciency

 5-Year Limited Warranty on 71PG-361PG

 3-Year Limited Warranty on 541PG

Cobalt-enriched Glass-Lined Tank

Turboflue

heat exchanger

®

 Energy-Saving Turbons conduct more
heat into water

 Robust single-ue design yields a stronger,
more durable tank

All-American Product

PowerGas

This product is available from:

Outlet

Auxiliary
Outlet:
71PG-EC

Inlet

T&P
Relief
Va lv e

D
C

B

E

A

Aquastat
Connection

Drain
Valve/
Return

Hand-Hole

Outlet

Auxiliary
Outlet

Inlet

T&P
Relief
Va lv e

D

C

B

E

A

Drain
Va lv e/
Return

Aquastat
Connection

Hand-Hole

Return:
120PG,
190PG,
241PG,
361PG

Outlet

High Limit

Inlet/
Return

T&P
Relief
Va lv e

C

B

E

A

Drain
Va lv e

Aquastat
Connection

Hand-Hole

541PG 72PG, 73PG, 120PG, 71PG

190PG, 241PG, 361PG

Model

Storage

(gal)

Rated
Input

BTUH A B C D E Standard ASME

Recovery

@ ∆ 90°F

(GPH)

Max. Temp

Setting

(°F)

Inlet

Pipe

Dia.

Outlet

Pipe

Dia.

Return

Pipe

Dia.

Dimensions

71PG 68 173,000 170 160** 1” 1 1/2”* 1 1/2” 66” 26” 6” 13 1/2” 22” 478 N/A

72PG 67 199,000 204 160** 1” 1 1/2”* 1 1/2” 58” 28” 8” 16” N/A 543 N/A

73PG 67 242,000 247 180 1” 1 1/2”* 1 1/2” 58” 28” 8” 16” N/A 548 N/A

120PG 113 155,000 160 180 1” 2”* 2” 67” 31 1/2” 6” 19” 22” 749 N/A

190PG 113 190,000 191 180 1” 2”* 2” 67” 31 1/2” 6” 19” 22” 749 N/A

241PG 109 277,000 283 180 1” 2”* 2”* 67” 31 1/2” 8” 19” 22” 901 943

361PG 91 385,000 435 180 1” 2”* 2”* 67” 31 1/2” 9” 23” 26” 1,080 1,116

541PG 83 623,000 627 180 2” 2”* 2”* 66” 34” 10” 22” 30 1/2” 1,313 1,569

No eld conversion kits available.
Maximum inlet gas pressure for natural gas: 10” w.c.; propane: 13” w.c. Minimum inlet gas pressure for natural gas: 4.5” w.c.; propane: 11” w.c.
Burner protrudes 12” - 14” from tank depending on make and model. Contact Bock for burner detail dimensions.

Shipping Weight

(lbs)***

*Nipple not included
**Optional setting, contact factory
***Weight does not include burner and controls

T&P Valve: Factory Installed
Drain Valve: Factory Installed Brass Valve
Standard Voltage (all): 120V, 60 Hz, 1P
Pressures (all): Working Pressure, 150 psi; Testing Pressure, 300 psi

ASHRAE: All Bock Products Meet or Exceed Current ASHRAE Standards.

Warning: Do not install on combustible ooring. Installation should be in accordance with all national and/or local codes. In the absence of local

codes, refer to NFPA 54 or ANSI Z.21.10.1.

(on selected models)

Caution: The recommended maximum hot water temperature setting for normal residential use is 120°F. Bock recommends a tempering valve or
anti-scald valve be installed and used according to the manufacturer’s directions to prevent scalding.

www.bockwaterheaters.com

110 South Dickinson Street , Madison, Wisconsin 53703

Toll Free 800.794.2491•Phone [phone]●Fax [phone]

80014-C Rev 5/08