Blue Ox BX88225 User Manual

®
Immobilizer™ II BX88225
Installation Instructions
for 2 1/2” Receiver Hitches
®
Installation for Immobilizer™ II BX8825
 e BX8825 Immobilizer™ II is designed to be used with 2 1/2” receiver hitches.  e Immobilizer II eliminates or greatly reduces rattling and movement in the receiver hitch.
Contents:
Ref # Qty. Part # Description 1 1 61-6308 Weldment, Immobilizer II, BX88224 2 2 201-0795 3/8-16 x 3.25 x 2.5 SQ U-Bolt, Grd 5 3 4 202-0071 3/8-16 Hex Flange Whiz Lock Nut
Tools
Required
9/16” Socket
USE ONLY GENUINE FACTORY REPLACEMENT PARTS.
Do NOT substitute homemade or non-typical parts. This may cause
your Immobilizer to fail and result in injury or death. If repairs of parts
or components of your Immobilizer are needed, you may order them
through your nearest Blue Ox® dealer or distributor, or call our 24/7
Customer Care Team at (402) 385-3051 or toll free at (888) 425-5382.
Installation Instructions
1. Insure the drop receiver or tow bar is pinned into receiver.
2. Remove the whiz nuts from the U-bolts to remove the U-bolts from the Immobilizer II. Position the 1/4” key stock pieces fl ush with the back side of the receiver hitch lip.
At Blue Ox® we pride ourselves in off ering
exceptional customer service to our valued
customers.
If you have any questions, comments, or
concerns please feel free to contact a member of
our 24/7 Customer Care Team by calling
(402) 385-3051 or
toll free at (888)425-5382.
BLUE OX
®
Customer Service Commitment
Blue Ox® is focused on providing exemplary customer service,
as observed in our mission statement and guiding principles. In
accordance with this objective, Blue Ox® is proud to provide services
such as repairs and general maintenance of Blue Ox® products at over 150 RV Rallies. Look for our Destination America or Blue Ox® Racing service crews at the next rally or race that you attend. If you
were not present, you will fi nd an informative, personalized note
explaining any services that may have been performed to
your Blue Ox® products.
Blue Ox® also off ers educational seminars at rallies and through our
Parks and Resort teams. In addition, Blue Ox® customers visiting our
factory may take advantage of the well-equipped Blue Ox® RV park
at no charge to you, our valued and appreciated customer.
3. Insuring the U-bolts are perpendicular to the receiver, tighten the whiz nuts fi rmly with a 9/16” socket and ratchet.
Immobilizer II installed
Page 1 of 1 09/06
One Mill Road, Industrial Park
© 2006 Blue Ox
Pender, Nebraska 68047
Phone: (402) 385-3051
Fax: (402) 385-3360
www.blueox.us
292-2891
Loading...